Changes our warning for combined use of `--preview` and `--select
NURSERY` to a hard error.
This should go out _before_ #9680 where we will ban use of `NURSERY`
outside of preview as well (see #9683).
Part of https://github.com/astral-sh/ruff/issues/7992
## Summary
Long ago, we had a single `ruff` crate. We started to break that up, and
at some point, we wanted to separate the CLI from the core library. So
we created `ruff_cli`, which created a `ruff` binary. Later, the `ruff`
crate was renamed to `ruff_linter` and further broken up into additional
crates.
(This is all from memory -- I didn't bother to look through the history
to ensure that this is 100% correct :))
Now that `ruff` no longer exists, this PR renames `ruff_cli` to `ruff`.
The primary benefit is that the binary target and the crate name are now
the same, which helps with downstream tooling like `cargo-dist`, and
also removes some complexity from the crate and `Cargo.toml` itself.
## Test Plan
- Ran `rm -rf target/release`.
- Ran `cargo build --release`.
- Verified that `./target/release/ruff` was created.
## Summary
Right now, if you run with `explicit-preview-rules`, and use something
like `select = ["RUF017"]`, we won't actually enable fixing for that
rule, because `fixable = ["ALL"]` (the default) won't include `RUF017`
due to the `explicit-preview-rules`.
The framing in this PR is that `explicit-preview-rules` should only
affect the enablement selectors, whereas the fixable selectors should
just include all possible matching rules. I think this will lead to the
most intuitive behavior.
Closes https://github.com/astral-sh/ruff/issues/9282. (An alternative to
https://github.com/astral-sh/ruff/pull/9284.)
<!--
Thank you for contributing to Ruff! To help us out with reviewing,
please consider the following:
- Does this pull request include a summary of the change? (See below.)
- Does this pull request include a descriptive title?
- Does this pull request include references to any relevant issues?
-->
## Summary
Fixes#8334.
`Display` has been implemented for `ruff_workspace::Settings`, which
gives a much nicer and more readable output to `--show-settings`.
Internally, a `display_settings` utility macro has been implemented to
reduce the boilerplate of the display code.
### Work to be done
- [x] A lot of formatting for `Vec<_>` and `HashSet<_>` types have been
stubbed out, using `Debug` as a fallback. There should be a way to add
generic formatting support for these types as a modifier in
`display_settings`.
- [x] Several complex types were also stubbed out and need proper
`Display` implementations rather than falling back on `Debug`.
- [x] An open question needs to be answered: how important is it that
the output be valid TOML? Some types in settings, such as a hash-map
from a glob pattern to a multi-variant enum, will be hard to rework into
valid _and_ readable TOML.
- [x] Tests need to be implemented.
## Test Plan
Tests consist of a snapshot test for the default `--show-settings`
output and a doctest for `display_settings!`.
## Summary
We haven't found time to flip this on, so feels like it's best to remove
it for now -- can always restore from source when we get back to it.
This PR does the plumbing to make a new formatting option,
`docstring-code-format`, available in the configuration for end users.
It is disabled by default (opt-in). It is opt-in at least initially to
reflect a conservative posture. The intent is to make it opt-out at some
point in the future.
This was split out from #8811 in order to make #8811 easier to merge.
Namely, once this is merged, docstring code snippet formatting will
become available to end users. (See comments below for how we arrived at
the name.)
Closes#7146
## Test Plan
Other than the standard test suite, I ran the formatter over the CPython
and polars projects to ensure both that the result looked sensible and
that tests still passed. At time of writing, one issue that currently
appears is that reformatting code snippets trips the long line lint:
1905886802
## Summary
Implements
[FURB136](https://github.com/dosisod/refurb/blob/master/docs/checks.md#furb136-use-min-max)
that checks for `if` expressions that can be replaced with `min()` or
`max()` calls. See issue #1348 for more information.
This implementation diverges from Refurb's original implementation by
retaining the order of equal values. For example, Refurb suggest that
the following expressions:
```python
highest_score1 = score1 if score1 > score2 else score2
highest_score2 = score1 if score1 >= score2 else score2
```
should be to rewritten as:
```python
highest_score1 = max(score1, score2)
highest_score2 = max(score1, score2)
```
whereas this implementation provides more correct alternatives:
```python
highest_score1 = max(score2, score1)
highest_score2 = max(score1, score2)
```
## Test Plan
Unit test checks all eight possibilities.
## Summary
This fixes#2606 by moving where we apply the convention ignores --
instead of applying that at the very end, e track, we now track which
rules have been specifically enabled (via `Specificity::Rule`). If they
have, then we do *not* apply the docstring overrides at the end.
## Test Plan
Added unit tests to `ruff_workspace` and an integration test to
`ruff_cli`
## Summary
This PR addresses the incompatibility with `jupyterlab-lsp` +
`python-lsp-ruff` arising from the inference of source type from file
extension, raised in #6847.
In particular it follows the suggestion in
https://github.com/astral-sh/ruff/issues/6847#issuecomment-1765724679 to
specify a mapping from file extension to source type.
The source types are
- python
- pyi
- ipynb
Usage:
```sh
ruff check --no-cache --stdin-filename Untitled.ipynb --extension ipynb:python
```
Unlike the original suggestion, `:` instead of `=` is used to associate
file extensions to language since that is what is used with
`--per-file-ignores` which is an existing option that accepts a mapping.
## Test Plan
2 tests added to `integration_test.rs` to ensure the override works as
expected
---------
Co-authored-by: Charlie Marsh <charlie.r.marsh@gmail.com>
## Summary
Prior to this change `extend_unsafe_fixes` took precedence over
`extend_safe_fixes` selectors, so any conflicts were resolved in favour
of `extend_unsafe_fixes`. Thanks to that ruff were conservatively
assuming that if configs conlict the fix corresponding to selected rule
will be treated as unsafe.
After this change we take into account Specificity of the selectors. For
conflicts between selectors of the same Specificity we will treat the
corresponding fixes as unsafe. But if the conflicting selectors are of
different specificity the more specific one will win.
## Test Plan
Tests were added for the `FixSafetyTable` struct. The
`check_extend_unsafe_fixes_conflict_with_extend_safe_fixes_by_specificity`
integration test was added to test conflicting rules of different
specificity.
Fixes#8404
---------
Co-authored-by: Zanie <contact@zanie.dev>
## Summary
Implement
[`no-isinstance-type-none`](https://github.com/dosisod/refurb/blob/master/refurb/checks/builtin/no_isinstance_type_none.py)
as `isinstance-type-none` (`FURB168`).
Auto-fixes calls to `isinstance` to check if an object is `None` to a
`None` identity check. For example,
```python
isinstance(foo, type(None))
```
becomes
```python
foo is None
```
Related to #1348.
## Test Plan
`cargo test`
---------
Co-authored-by: Charlie Marsh <charlie.r.marsh@gmail.com>
## Summary
This PR renames the `tab-size` configuration option to `indent-width` to
express that the formatter uses the option to determine the indentation
width AND as tab width.
I first preferred naming the option `tab-width` but then decided to go
with `indent-width` because:
* It aligns with the `indent-style` option
* It would allow us to write a lint rule that asserts that each
indentation uses `indent-width` spaces.
Closes#7643
## Test Plan
Added integration test
## Summary
This PR introduces a new `pycodestyl.max-line-length` option that allows overriding the global `line-length` option for `E501` only.
This is useful when using the formatter and `E501` together, where the formatter uses a lower limit and `E501` is only used to catch extra-long lines.
Closes#7644
## Considerations
~~Our fix infrastructure asserts in some places that the fix doesn't exceed the configured `line-width`. With this change, the question is whether it should use the `pycodestyle.max-line-width` or `line-width` option to make that decision.
I opted for the global `line-width` for now, considering that it should be the lower limit. However, this constraint isn't enforced and users not using the formatter may only specify `pycodestyle.max-line-width` because they're unaware of the global option (and it solves their need).~~
~~I'm interested to hear your thoughts on whether we should use `pycodestyle.max-line-width` or `line-width` to decide on whether to emit a fix or not.~~
Edit: The linter users `pycodestyle.max-line-width`. The `line-width` option has been removed from the `LinterSettings`
## Test Plan
Added integration test. Built the documentation and verified that the links are correct.
See the provided breaking changes note for details.
Removes support for the deprecated `--format`option in the `ruff check`
CLI, `format` inference as `output-format` in the configuration file,
and the `RUFF_FORMAT` environment variable.
The error message for use of `format` in the configuration file could be
better, but would require some awkward serde wrappers and it seems hard
to present the correct schema to the user still.
## Summary
Unlike other filepath-based settings, the `cache-dir` wasn't being
resolved relative to the project root, when specified as an absolute
path.
Closes https://github.com/astral-sh/ruff/issues/7958.
Closes https://github.com/astral-sh/ruff/issues/7572
Drops formatting specific rules from the default rule set as they
conflict with formatters in general (and in particular, conflict with
our formatter). Most of these rules are in preview, but the removal of
`line-too-long` and `mixed-spaces-and-tabs` is a change to the stable
rule set.
## Example
The following no longer raises `E501`
```
echo "xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx = 1" | ruff check -
```
Adds two configuration-file only settings `extend-safe-fixes` and
`extend-unsafe-fixes` which can be used to promote and demote the
applicability of fixes for rules.
Fixes with `Never` applicability cannot be promoted.
Closes https://github.com/astral-sh/ruff/issues/7491
Users found it confusing that warnings were displayed when ignoring a
preview rule (which has no effect without `--preview`). While we could
retain the warning with different messaging, I've opted to remove it for
now. With this pull request, we will only warn on `--select` and
`--extend-select` but not `--fixable`, `--unfixable`, `--ignore`, or
`--extend-fixable`.
Rebase of https://github.com/astral-sh/ruff/pull/5119 authored by
@evanrittenhouse with additional refinements.
## Changes
- Adds `--unsafe-fixes` / `--no-unsafe-fixes` flags to `ruff check`
- Violations with unsafe fixes are not shown as fixable unless opted-in
- Fix applicability is respected now
- `Applicability::Never` fixes are no longer applied
- `Applicability::Sometimes` fixes require opt-in
- `Applicability::Always` fixes are unchanged
- Hints for availability of `--unsafe-fixes` added to `ruff check`
output
## Examples
Check hints at hidden unsafe fixes
```
❯ ruff check example.py --no-cache --select F601,W292
example.py:1:14: F601 Dictionary key literal `'a'` repeated
example.py:2:15: W292 [*] No newline at end of file
Found 2 errors.
[*] 1 fixable with the `--fix` option (1 hidden fix can be enabled with the `--unsafe-fixes` option).
```
We could add an indicator for which violations have hidden fixes in the
future.
Check treats unsafe fixes as applicable with opt-in
```
❯ ruff check example.py --no-cache --select F601,W292 --unsafe-fixes
example.py:1:14: F601 [*] Dictionary key literal `'a'` repeated
example.py:2:15: W292 [*] No newline at end of file
Found 2 errors.
[*] 2 fixable with the --fix option.
```
Also can be enabled in the config file
```
❯ cat ruff.toml
unsafe-fixes = true
```
And opted-out per invocation
```
❯ ruff check example.py --no-cache --select F601,W292 --no-unsafe-fixes
example.py:1:14: F601 Dictionary key literal `'a'` repeated
example.py:2:15: W292 [*] No newline at end of file
Found 2 errors.
[*] 1 fixable with the `--fix` option (1 hidden fix can be enabled with the `--unsafe-fixes` option).
```
Diff does not include unsafe fixes
```
❯ ruff check example.py --no-cache --select F601,W292 --diff
--- example.py
+++ example.py
@@ -1,2 +1,2 @@
x = {'a': 1, 'a': 1}
-print(('foo'))
+print(('foo'))
\ No newline at end of file
Would fix 1 error.
```
Unless there is opt-in
```
❯ ruff check example.py --no-cache --select F601,W292 --diff --unsafe-fixes
--- example.py
+++ example.py
@@ -1,2 +1,2 @@
-x = {'a': 1}
-print(('foo'))
+x = {'a': 1, 'a': 1}
+print(('foo'))
\ No newline at end of file
Would fix 2 errors.
```
https://github.com/astral-sh/ruff/pull/7790 will improve the diff
messages following this pull request
Similarly, `--fix` and `--fix-only` require the `--unsafe-fixes` flag to
apply unsafe fixes.
## Related
Replaces #5119
Closes https://github.com/astral-sh/ruff/issues/4185
Closes https://github.com/astral-sh/ruff/issues/7214
Closes https://github.com/astral-sh/ruff/issues/4845
Closes https://github.com/astral-sh/ruff/issues/3863
Addresses https://github.com/astral-sh/ruff/issues/6835
Addresses https://github.com/astral-sh/ruff/issues/7019
Needs follow-up https://github.com/astral-sh/ruff/issues/6962
Needs follow-up https://github.com/astral-sh/ruff/issues/4845
Needs follow-up https://github.com/astral-sh/ruff/issues/7436
Needs follow-up https://github.com/astral-sh/ruff/issues/7025
Needs follow-up https://github.com/astral-sh/ruff/issues/6434
Follow-up #7790
Follow-up https://github.com/astral-sh/ruff/pull/7792
---------
Co-authored-by: Evan Rittenhouse <evanrittenhouse@gmail.com>
Closes#7434
Replaces the `PREVIEW` selector (removed in #7389) with a configuration
option `explicit-preview-rules` which requires selectors to use exact
rule codes for all preview rules. This allows users to enable preview
without opting into all preview rules at once.
## Test plan
Unit tests
## Summary
This PR adds a new `lint` section to the configuration that groups all linter-specific settings. The existing top-level configurations continue to work without any warning because the `lint.*` settings are experimental.
The configuration merges the top level and `lint.*` settings where the settings in `lint` have higher precedence (override the top-level settings). The reasoning behind this is that the settings in `lint.` are more specific and more specific settings should override less specific settings.
I decided against showing the new `lint.*` options on our website because it would make the page extremely long (it's technically easy to do, just attribute `lint` with `[option_group`]). We may want to explore adding an `alias` field to the `option` attribute and show the alias on the website along with its regular name.
## Test Plan
* I added new integration tests
* I verified that the generated `options.md` is identical
* Verified the default settings in the playground
## Summary
## Stack Summary
This stack splits `Settings` into `FormatterSettings` and `LinterSettings` and moves it into `ruff_workspace`. This change is necessary to add the `FormatterSettings` to `Settings` without adding `ruff_python_formatter` as a dependency to `ruff_linter` (and the linter should not contain the formatter settings).
A quick overview of our settings struct at play:
* `Options`: 1:1 representation of the options in the `pyproject.toml` or `ruff.toml`. Used for deserialization.
* `Configuration`: Resolved `Options`, potentially merged from multiple configurations (when using `extend`). The representation is very close if not identical to the `Options`.
* `Settings`: The resolved configuration that uses a data format optimized for reading. Optional fields are initialized with their default values. Initialized by `Configuration::into_settings` .
The goal of this stack is to split `Settings` into tool-specific resolved `Settings` that are independent of each other. This comes at the advantage that the individual crates don't need to know anything about the other tools. The downside is that information gets duplicated between `Settings`. Right now the duplication is minimal (`line-length`, `tab-width`) but we may need to come up with a solution if more expensive data needs sharing.
This stack focuses on `Settings`. Splitting `Configuration` into some smaller structs is something I'll follow up on later.
## PR Summary
This PR moves the `ResolverSettings` and `Settings` struct to `ruff_workspace`. `LinterSettings` remains in `ruff_linter` because it gets passed to lint rules, the `Checker` etc.
## Test Plan
`cargo test`
## Stack Summary
This stack splits `Settings` into `FormatterSettings` and `LinterSettings` and moves it into `ruff_workspace`. This change is necessary to add the `FormatterSettings` to `Settings` without adding `ruff_python_formatter` as a dependency to `ruff_linter` (and the linter should not contain the formatter settings).
A quick overview of our settings struct at play:
* `Options`: 1:1 representation of the options in the `pyproject.toml` or `ruff.toml`. Used for deserialization.
* `Configuration`: Resolved `Options`, potentially merged from multiple configurations (when using `extend`). The representation is very close if not identical to the `Options`.
* `Settings`: The resolved configuration that uses a data format optimized for reading. Optional fields are initialized with their default values. Initialized by `Configuration::into_settings` .
The goal of this stack is to split `Settings` into tool-specific resolved `Settings` that are independent of each other. This comes at the advantage that the individual crates don't need to know anything about the other tools. The downside is that information gets duplicated between `Settings`. Right now the duplication is minimal (`line-length`, `tab-width`) but we may need to come up with a solution if more expensive data needs sharing.
This stack focuses on `Settings`. Splitting `Configuration` into some smaller structs is something I'll follow up on later.
## PR Summary
This PR extracts the linter-specific settings into a new `LinterSettings` struct and adds it as a `linter` field to the `Settings` struct. This is in preparation for moving `Settings` from `ruff_linter` to `ruff_workspace`
## Test Plan
`cargo test`
## Stack Summary
This stack splits `Settings` into `FormatterSettings` and `LinterSettings` and moves it into `ruff_workspace`. This change is necessary to add the `FormatterSettings` to `Settings` without adding `ruff_python_formatter` as a dependency to `ruff_linter` (and the linter should not contain the formatter settings).
A quick overview of our settings struct at play:
* `Options`: 1:1 representation of the options in the `pyproject.toml` or `ruff.toml`. Used for deserialization.
* `Configuration`: Resolved `Options`, potentially merged from multiple configurations (when using `extend`). The representation is very close if not identical to the `Options`.
* `Settings`: The resolved configuration that uses a data format optimized for reading. Optional fields are initialized with their default values. Initialized by `Configuration::into_settings` .
The goal of this stack is to split `Settings` into tool-specific resolved `Settings` that are independent of each other. This comes at the advantage that the individual crates don't need to know anything about the other tools. The downside is that information gets duplicated between `Settings`. Right now the duplication is minimal (`line-length`, `tab-width`) but we may need to come up with a solution if more expensive data needs sharing.
This stack focuses on `Settings`. Splitting `Configuration` into some smaller structs is something I'll follow up on later.
## PR Summary
This PR extracts a `ResolverSettings` struct that holds all the resolver-relevant fields (uninteresting for the `Formatter` or `Linter`). This will allow us to move the `ResolverSettings` out of `ruff_linter` further up in the stack.
## Test Plan
`cargo test`
(I'll to more extensive testing at the top of this stack)
## Summary
Implement
[`no-ignored-enumerate-items`](https://github.com/dosisod/refurb/blob/master/refurb/checks/builtin/no_ignored_enumerate.py)
as `unnecessary-enumerate` (`FURB148`).
The auto-fix considers if a `start` argument is passed to the
`enumerate()` function. If only the index is used, then the suggested
fix is to pass the `start` value to the `range()` function. So,
```python
for i, _ in enumerate(xs, 1):
...
```
becomes
```python
for i in range(1, len(xs)):
...
```
If the index is ignored and only the value is ignored, and if a start
value greater than zero is passed to `enumerate()`, the rule doesn't
produce a suggestion. I couldn't find a unanimously accepted best way to
iterate over a collection whilst skipping the first n elements. The rule
still triggers, however.
Related to #1348.
## Test Plan
`cargo test`
---------
Co-authored-by: Dhruv Manilawala <dhruvmanila@gmail.com>
Co-authored-by: Charlie Marsh <charlie.r.marsh@gmail.com>
## Summary
This PR implements a new rule for `flake8-logging` plugin that checks
for
`logging.getLogger` calls with either `__file__` or `__cached__` as the
first
argument and generates a suggested fix to use `__name__` instead.
Refer: #7248
## Test Plan
Add test cases and `cargo test`
## Summary
Adds `LOG009` from
[flake8-logging](https://github.com/adamchainz/flake8-logging). Also
adds the boilerplate for a new plugin
Checks for usages of undocumented `logging.WARN` constant and suggests
replacement with `logging.WARNING`.
## Test Plan
`cargo test` with fresh fixture
## Issue links
Refers: https://github.com/astral-sh/ruff/issues/7248
The rule selector is not useful because `--select PREVIEW` only targets
Ruff developers and `--ignore PREVIEW` has no effect due to its low
specificity. We may restore it later if useful.
