## Summary
This PR refactors the formatter diff code to reuse the
`SourceKind::diff` logic. This has the benefit that the Notebook diff
now includes the cell numbers which was not present before.
## Test Plan
Update the snapshots and verified the cell numbers.
## Summary
This PR removes the `todo!()` around `IpyEscapeCommand` in the
formatter.
The `NeedsParentheses` trait needs to be implemented which always return
`Never`. The reason being that if an escape command is parenthesized,
then that's not parsed as an escape command. IOW, the parentheses
shouldn't be present around an escape command.
In the similar way, the `CanSkipOptionalParenthesesVisitor` will skip
this node.
## Test Plan
Updated the `unformatted.ipynb` fixture with new cells containing
IPython escape commands and the corresponding snapshot was verified.
Also, tested it out in a few open source repositories containing
notebooks (`openai/openai-cookbook`, `huggingface/notebooks`).
#### New cells in `unformatted.ipynb`
**Cell 2**
```markdown
A markdown cell
```
**Cell 3**
```python
def some_function(foo, bar):
pass
%matplotlib inline
```
**Cell 4**
```python
foo = %pwd
def some_function(foo,bar,):
foo = %pwd
print(foo
)
```
fixes: #8204
## Summary
Related to https://github.com/astral-sh/ruff/issues/8135.
If we're not printing a `--diff`, or a summary of `--check` changes, we
can avoid sorting the list of results. Further, when sorting, we only
need to sort a small subset of the entries, in the common case (i.e., in
general, it's much more likely that a file is formatted than not).
## Test Plan
Local benchmarks suggest a 5-10% speedup on the cached behavior:
```
❯ hyperfine --warmup 3 "./target/release/ruff format ../airflow" "./target/release/sort format ../airflow"
Benchmark 1: ./target/release/ruff format ../airflow
Time (mean ± σ): 70.3 ms ± 5.2 ms [User: 52.1 ms, System: 59.0 ms]
Range (min … max): 68.3 ms … 101.7 ms 42 runs
Warning: Statistical outliers were detected. Consider re-running this benchmark on a quiet PC without any interferences from other programs. It might help to use the '--warmup' or '--prepare' options.
Benchmark 2: ./target/release/sort format ../airflow
Time (mean ± σ): 66.0 ms ± 1.4 ms [User: 48.3 ms, System: 58.4 ms]
Range (min … max): 64.7 ms … 71.8 ms 44 runs
Warning: Statistical outliers were detected. Consider re-running this benchmark on a quiet PC without any interferences from other programs. It might help to use the '--warmup' or '--prepare' options.
Summary
'./target/release/sort format ../airflow' ran
1.07 ± 0.08 times faster than './target/release/ruff format ../airflow'
```
## Summary
This PR renames the `tab-size` configuration option to `indent-width` to
express that the formatter uses the option to determine the indentation
width AND as tab width.
I first preferred naming the option `tab-width` but then decided to go
with `indent-width` because:
* It aligns with the `indent-style` option
* It would allow us to write a lint rule that asserts that each
indentation uses `indent-width` spaces.
Closes#7643
## Test Plan
Added integration test
## Summary
This PR introduces a new `pycodestyl.max-line-length` option that allows overriding the global `line-length` option for `E501` only.
This is useful when using the formatter and `E501` together, where the formatter uses a lower limit and `E501` is only used to catch extra-long lines.
Closes#7644
## Considerations
~~Our fix infrastructure asserts in some places that the fix doesn't exceed the configured `line-width`. With this change, the question is whether it should use the `pycodestyle.max-line-width` or `line-width` option to make that decision.
I opted for the global `line-width` for now, considering that it should be the lower limit. However, this constraint isn't enforced and users not using the formatter may only specify `pycodestyle.max-line-width` because they're unaware of the global option (and it solves their need).~~
~~I'm interested to hear your thoughts on whether we should use `pycodestyle.max-line-width` or `line-width` to decide on whether to emit a fix or not.~~
Edit: The linter users `pycodestyle.max-line-width`. The `line-width` option has been removed from the `LinterSettings`
## Test Plan
Added integration test. Built the documentation and verified that the links are correct.
Adds a new `ruff version` sub-command which displays long version
information in the style of `cargo` and `rustc`. We include the number
of commits since the last release tag if its a development build, in the
style of Python's versioneer.
```
❯ ruff version
ruff 0.1.0+14 (947940e91 2023-10-18)
```
```
❯ ruff version --output-format json
{
"version": "0.1.0",
"commit_info": {
"short_commit_hash": "947940e91",
"commit_hash": "947940e91269f20f6b3f8f8c7c63f8e914680e80",
"commit_date": "2023-10-18",
"last_tag": "v0.1.0",
"commits_since_last_tag": 14
}
}%
```
```
❯ cargo version
cargo 1.72.1 (103a7ff2e 2023-08-15)
```
## Test plan
I've tested this manually locally, but want to at least add unit tests
for the message formatting. We'd also want to check the next release to
ensure the information is correct.
I checked build behavior with a detached head and branches.
## Future work
We could include rustc and cargo versions from the build, the current
Python version, and other diagnostic information for bug reports.
The `--version` and `-V` output is unchanged. However, we could update
it to display the long ruff version without the rust and cargo versions
(this is what cargo does). We'll need to be careful to ensure this does
not break downstream packages which parse our version string.
```
❯ ruff --version
ruff 0.1.0
```
The LSP should be updated to use `ruff version --output-format json`
instead of parsing `ruff --version`.
- Add changelog entry for 0.1.1
- Bump version to 0.1.1
- Require preview for fix added in #7967
- Allow duplicate headings in changelog (markdownlint setting)
**Summary** `ruff format --diff` is similar to `ruff format --check`,
but we don't only error with the list of file that would be formatted,
but also show a diff between the unformatted input and the formatted
output.
```console
$ ruff format --diff scratch.py scratch.pyi scratch.ipynb
warning: `ruff format` is not yet stable, and subject to change in future versions.
--- scratch.ipynb
+++ scratch.ipynb
@@ -1,3 +1,4 @@
import numpy
-maths = (numpy.arange(100)**2).sum()
-stats= numpy.asarray([1,2,3,4]).median()
+
+maths = (numpy.arange(100) ** 2).sum()
+stats = numpy.asarray([1, 2, 3, 4]).median()
--- scratch.py
+++ scratch.py
@@ -1,3 +1,3 @@
x = 1
-y=2
+y = 2
z = 3
2 files would be reformatted, 1 file left unchanged
```
With `--diff`, the summary message gets printed to stderr to allow e.g.
`ruff format --diff . > format.patch`.
At the moment, jupyter notebooks are formatted as code diffs, while
everything else is a real diff that could be applied. This means that
the diffs containing jupyter notebooks are not real diffs and can't be
applied. We could change this to json diffs, but they are hard to read.
We could also split the diff option into a human diff option, where we
deviate from the machine readable diff constraints, and a proper machine
readable, appliable diff output that you can pipe into other tools.
To make the tests work, the results (and errors, if any) are sorted
before printing them. Previously, the print order was random, i.e. two
identical runs could have different output.
Open question: Should this go into the markdown docs? Or will this be
subsumed by the integration of the formatter into `ruff check`?
**Test plan** Fixtures for the change and no change cases, including a
jupyter notebook and for file input and stdin.
Fixes#7231
---------
Co-authored-by: Micha Reiser <micha@reiser.io>
## Summary
When linting, we store a map from file path to fixes, which we then use
to show a fix summary in the printer.
In the printer, we assume that if the map is non-empty, then we have at
least one fix. But this isn't enforced by the fix struct, since you can
have an entry from (file path) to (empty fix table). In practice, this
only bites us when linting from `stdin`, since when linting across
multiple files, we have an `AddAssign` on `Diagnostics` that avoids
adding empty entries to the map. When linting from `stdin`, we create
the map directly, and so it _is_ possible to have a non-empty map that
doesn't contain any fixes, leading to a panic.
This PR introduces a dedicated struct to make these constraints part of
the formal interface.
Closes https://github.com/astral-sh/ruff/issues/8027.
## Test Plan
`cargo test` (notice two failures are removed)
See the provided breaking changes note for details.
Removes support for the deprecated `--format`option in the `ruff check`
CLI, `format` inference as `output-format` in the configuration file,
and the `RUFF_FORMAT` environment variable.
The error message for use of `format` in the configuration file could be
better, but would require some awkward serde wrappers and it seems hard
to present the correct schema to the user still.
## Summary
This PR adds a new `cell` field to the JSON output format which
indicates the Notebook cell this diagnostic (and fix) belongs to. It
also updates the location for the diagnostic and fixes as per the
`NotebookIndex`. It will be used in the VSCode extension to display the
diagnostic in the correct cell.
The diagnostic and edit start and end source locations are translated
for the notebook as per the `NotebookIndex`. The end source location for
an edit needs some special handling.
### Edit end location
To understand this, the following context is required:
1. Visible lines in Jupyter Notebook vs JSON array strings: The newline
is part of the string in the JSON format. This means that if there are 3
visible lines in a cell where the last line is empty then the JSON would
contain 2 strings in the source array, both ending with a newline:
**JSON format:**
```json
[
"# first line\n",
"# second line\n",
]
```
**Notebook view:**
```python
1 # first line
2 # second line
3
```
2. If an edit needs to remove an entire line including the newline, then
the end location would be the start of the next row.
To remove a statement in the following code:
```python
import os
```
The edit would be:
```
start: row 1, col 1
end: row 2, col 1
```
Now, here's where the problem lies. The notebook index doesn't have any
information for row 2 because it doesn't exists in the actual notebook.
The newline was added by Ruff to concatenate the source code and it's
removed before writing back. But, the edit is computed looking at that
newline.
This means that while translating the end location for an edit belong to
a Notebook, we need to check if both the start and end location belongs
to the same cell. If not, then the end location should be the first
character of the next row and if so, translate that back to the last
character of the previous row. Taking the above example, the translated
location for Notebook would be:
```
start: row 1, col 1
end: row 1, col 10
```
## Test Plan
Add test cases for notebook output in the JSON format and update
existing snapshots.
Adds two configuration-file only settings `extend-safe-fixes` and
`extend-unsafe-fixes` which can be used to promote and demote the
applicability of fixes for rules.
Fixes with `Never` applicability cannot be promoted.
## Summary
Fixes#7853.
The old and new source files were reversed in the call to
`TextDiff::from_lines`, so the diff output of the CLI was also reversed.
## Test Plan
Two snapshots were updated in the process, so any reversal should be
caught :)
Closes https://github.com/astral-sh/ruff/issues/7491
Users found it confusing that warnings were displayed when ignoring a
preview rule (which has no effect without `--preview`). While we could
retain the warning with different messaging, I've opted to remove it for
now. With this pull request, we will only warn on `--select` and
`--extend-select` but not `--fixable`, `--unfixable`, `--ignore`, or
`--extend-fixable`.
After working with the previous change in
https://github.com/astral-sh/ruff/pull/7821 I found the names a bit
unclear and their relationship with the user-facing API muddied. Since
the applicability is exposed to the user directly in our JSON output, I
think it's important that these names align with our configuration
options. I've replaced `Manual` or `Never` with `Display` which captures
our intent for these fixes (only for display). Here, we create room for
future levels, such as `HasPlaceholders`, which wouldn't fit into the
`Always`/`Sometimes`/`Never` levels.
Unlike https://github.com/astral-sh/ruff/pull/7819, this retains the
flat enum structure which is easier to work with.
Previously we just omitted diagnostic summaries when using `--fix` or
`--diff` with a stdin file. Now, we still write the summaries to stderr
instead of the main writer (which is generally stdout but could be
changed by `--output-file`).
Rebase of https://github.com/astral-sh/ruff/pull/5119 authored by
@evanrittenhouse with additional refinements.
## Changes
- Adds `--unsafe-fixes` / `--no-unsafe-fixes` flags to `ruff check`
- Violations with unsafe fixes are not shown as fixable unless opted-in
- Fix applicability is respected now
- `Applicability::Never` fixes are no longer applied
- `Applicability::Sometimes` fixes require opt-in
- `Applicability::Always` fixes are unchanged
- Hints for availability of `--unsafe-fixes` added to `ruff check`
output
## Examples
Check hints at hidden unsafe fixes
```
❯ ruff check example.py --no-cache --select F601,W292
example.py:1:14: F601 Dictionary key literal `'a'` repeated
example.py:2:15: W292 [*] No newline at end of file
Found 2 errors.
[*] 1 fixable with the `--fix` option (1 hidden fix can be enabled with the `--unsafe-fixes` option).
```
We could add an indicator for which violations have hidden fixes in the
future.
Check treats unsafe fixes as applicable with opt-in
```
❯ ruff check example.py --no-cache --select F601,W292 --unsafe-fixes
example.py:1:14: F601 [*] Dictionary key literal `'a'` repeated
example.py:2:15: W292 [*] No newline at end of file
Found 2 errors.
[*] 2 fixable with the --fix option.
```
Also can be enabled in the config file
```
❯ cat ruff.toml
unsafe-fixes = true
```
And opted-out per invocation
```
❯ ruff check example.py --no-cache --select F601,W292 --no-unsafe-fixes
example.py:1:14: F601 Dictionary key literal `'a'` repeated
example.py:2:15: W292 [*] No newline at end of file
Found 2 errors.
[*] 1 fixable with the `--fix` option (1 hidden fix can be enabled with the `--unsafe-fixes` option).
```
Diff does not include unsafe fixes
```
❯ ruff check example.py --no-cache --select F601,W292 --diff
--- example.py
+++ example.py
@@ -1,2 +1,2 @@
x = {'a': 1, 'a': 1}
-print(('foo'))
+print(('foo'))
\ No newline at end of file
Would fix 1 error.
```
Unless there is opt-in
```
❯ ruff check example.py --no-cache --select F601,W292 --diff --unsafe-fixes
--- example.py
+++ example.py
@@ -1,2 +1,2 @@
-x = {'a': 1}
-print(('foo'))
+x = {'a': 1, 'a': 1}
+print(('foo'))
\ No newline at end of file
Would fix 2 errors.
```
https://github.com/astral-sh/ruff/pull/7790 will improve the diff
messages following this pull request
Similarly, `--fix` and `--fix-only` require the `--unsafe-fixes` flag to
apply unsafe fixes.
## Related
Replaces #5119
Closes https://github.com/astral-sh/ruff/issues/4185
Closes https://github.com/astral-sh/ruff/issues/7214
Closes https://github.com/astral-sh/ruff/issues/4845
Closes https://github.com/astral-sh/ruff/issues/3863
Addresses https://github.com/astral-sh/ruff/issues/6835
Addresses https://github.com/astral-sh/ruff/issues/7019
Needs follow-up https://github.com/astral-sh/ruff/issues/6962
Needs follow-up https://github.com/astral-sh/ruff/issues/4845
Needs follow-up https://github.com/astral-sh/ruff/issues/7436
Needs follow-up https://github.com/astral-sh/ruff/issues/7025
Needs follow-up https://github.com/astral-sh/ruff/issues/6434
Follow-up #7790
Follow-up https://github.com/astral-sh/ruff/pull/7792
---------
Co-authored-by: Evan Rittenhouse <evanrittenhouse@gmail.com>
## Summary
The implementation here differs from the non-`stdin` version -- this is
now more consistent.
## Test Plan
```
❯ cat Untitled.ipynb | cargo run -p ruff_cli -- check --stdin-filename Untitled.ipynb --diff -n
Finished dev [unoptimized + debuginfo] target(s) in 0.11s
Running `target/debug/ruff check --stdin-filename Untitled.ipynb --diff -n`
--- Untitled.ipynb:cell 2
+++ Untitled.ipynb:cell 2
@@ -1 +0,0 @@
-import os
--- Untitled.ipynb:cell 4
+++ Untitled.ipynb:cell 4
@@ -1 +0,0 @@
-import sys
```
## Summary
We now list each changed file when running with `--check`.
Closes https://github.com/astral-sh/ruff/issues/7782.
## Test Plan
```
❯ cargo run -p ruff_cli -- format foo.py --check
Compiling ruff_cli v0.0.292 (/Users/crmarsh/workspace/ruff/crates/ruff_cli)
rgo + Finished dev [unoptimized + debuginfo] target(s) in 1.41s
Running `target/debug/ruff format foo.py --check`
warning: `ruff format` is a work-in-progress, subject to change at any time, and intended only for experimentation.
Would reformat: foo.py
1 file would be reformatted
```
## Summary
This PR enables `ruff format` to format Jupyter notebooks.
Most of the work is contained in a new `format_source` method that
formats a generic `SourceKind`, then returns `Some(transformed)` if the
source required formatting, or `None` otherwise.
Closes https://github.com/astral-sh/ruff/issues/7598.
## Test Plan
Ran `cat foo.py | cargo run -p ruff_cli -- format --stdin-filename
Untitled.ipynb`; verified that the console showed a reasonable error:
```console
warning: Failed to read notebook Untitled.ipynb: Expected a Jupyter Notebook, which must be internally stored as JSON, but this file isn't valid JSON: EOF while parsing a value at line 1 column 0
```
Ran `cat Untitled.ipynb | cargo run -p ruff_cli -- format
--stdin-filename Untitled.ipynb`; verified that the JSON output
contained formatted source code.
## Summary
When writing back notebooks via `stdout`, we need to write back the
entire JSON content, not _just_ the fixed source code. Otherwise,
writing the output _back_ to the file will yield an invalid notebook.
Closes https://github.com/astral-sh/ruff/issues/7747
## Test Plan
`cargo test`
## Summary
This PR fixes the bug where the `NotebookIndex` was not being computed
when
using stdin as the input source.
## Test Plan
On `main`, the diagnostic output won't include the cell number when
using stdin
while it'll be included after this fix.
### `main`
```console
$ cat ~/playground/ruff/notebooks/test.ipynb | cargo run --bin ruff -- check --isolated --no-cache - --stdin-filename ~/playground/ruff/notebooks/test.ipynb
/Users/dhruv/playground/ruff/notebooks/test.ipynb:2:8: F401 [*] `math` imported but unused
/Users/dhruv/playground/ruff/notebooks/test.ipynb:7:8: F811 Redefinition of unused `random` from line 1
/Users/dhruv/playground/ruff/notebooks/test.ipynb:8:8: F401 [*] `pprint` imported but unused
/Users/dhruv/playground/ruff/notebooks/test.ipynb:12:4: F632 [*] Use `==` to compare constant literals
/Users/dhruv/playground/ruff/notebooks/test.ipynb:13:38: F632 [*] Use `==` to compare constant literals
Found 5 errors.
[*] 4 potentially fixable with the --fix option.
```
### `dhruv/notebook-index-stdin`
```console
$ cat ~/playground/ruff/notebooks/test.ipynb | cargo run --bin ruff -- check --isolated --no-cache - --stdin-filename ~/playground/ruff/notebooks/test.ipynb
/Users/dhruv/playground/ruff/notebooks/test.ipynb:cell 3:2:8: F401 [*] `math` imported but unused
/Users/dhruv/playground/ruff/notebooks/test.ipynb:cell 5:1:8: F811 Redefinition of unused `random` from line 1
/Users/dhruv/playground/ruff/notebooks/test.ipynb:cell 5:2:8: F401 [*] `pprint` imported but unused
/Users/dhruv/playground/ruff/notebooks/test.ipynb:cell 6:2:4: F632 [*] Use `==` to compare constant literals
/Users/dhruv/playground/ruff/notebooks/test.ipynb:cell 6:3:38: F632 [*] Use `==` to compare constant literals
Found 5 errors.
[*] 4 potentially fixable with the --fix option.
```
Previously attempted to repair these tests at
https://github.com/astral-sh/ruff/pull/6992 but I don't think we should
prioritize that and instead I would like to remove this dead code.
