## Summary
Per suggestion in
https://github.com/astral-sh/ruff/pull/14802#discussion_r1875455417
This is a bit less error-prone and allows us to handle both expressions
in the current scope or a different scope. Also, there's currently no
need for this method outside of `TypeInferenceBuilder`, so no reason to
expose it in `types.rs`.
## Test Plan
Pure refactor, no functional change; existing tests pass.
---------
Co-authored-by: Alex Waygood <Alex.Waygood@Gmail.com>
## Summary
Part 1 of the big change introduced in #14828. This temporarily causes
all fixes for `round(...)` to be considered unsafe, but they will
eventually be enhanced.
## Test Plan
`cargo nextest run` and `cargo insta test`.
## Summary
Close#11243. Fix `pytest-parametrize-names-wrong-type (PT006)` to edit
both `argnames` and `argvalues` if both of them are single-element
tuples/lists.
```python
# Before fix
@pytest.mark.parametrize(("x",), [(1,), (2,)])
def test_foo(x):
...
# After fix:
@pytest.mark.parametrize("x", [1, 2])
def test_foo(x):
...
```
## Test Plan
New test cases
This PR introduces three changes to the diagnostic and fix behavior
(still under preview) for [boolean-chained-comparison
(PLR1716)](https://docs.astral.sh/ruff/rules/boolean-chained-comparison/#boolean-chained-comparison-plr1716).
1. We now offer a _fix_ in the case of parenthesized expressions like
`(a < b) and b < c`. The fix will merge the chains of comparisons and
then balance parentheses by _adding_ parentheses to one side of the
expression.
2. We now trigger a diagnostic (and fix) in the case where some
comparisons have multiple comparators like `a < b < c and c < d`.
3. When adjacent comparators are parenthesized, we prefer the left
parenthesization and apply the replacement to the whole parenthesized
range. So, for example, `a < (b) and ((b)) < c` becomes `a < (b) < c`.
While these seem like somewhat disconnected changes, they are actually
related. If we only offered (1), then we would see the following fix
behavior:
```diff
- (a < b) and b < c and ((c < d))
+ (a < b < c) and ((c < d))
```
This is because the fix which add parentheses to the first pair of
comparisons overlaps with the fix that removes the `and` between the
second two comparisons. So the latter fix is deferred. However, the
latter fix does not get a second chance because, upon the next lint
iteration, there is no violation of `PLR1716`.
Upon adopting (2), however, both fixes occur by the time ruff completes
several iterations and we get:
```diff
- (a < b) and b < c and ((c < d))
+ ((a < b < c < d))
```
Finally, (3) fixes a previously unobserved bug wherein the autofix for
`a < (b) and b < c` used to result in `a<(b<c` which gives a syntax
error. It could in theory have been fixed in a separate PR, but seems to
be on theme here.
----------
- Closes#13524
- (1), (2), and (3) are implemented in separate commits for ease of
review and modification.
- Technically a user can trigger an error in ruff (by reaching max
iterations) if they have a humongous boolean chained comparison with
differing parentheses levels.
## Summary
Minor change for the documentation of COM818 rule. This was a block
called “In the event that a tuple is intended”, but the suggested change
did not produce a tuple.
## Test Plan
```python
>>> import json
>>> (json.dumps({"bar": 1}),) # this is a tuple
('{"bar": 1}',)
>>> (json.dumps({"bar": 1})) # not a tuple
'{"bar": 1}'
```
Improves error message for [except*](https://peps.python.org/pep-0654/)
(Rules: B025, B029, B030, B904)
Example python snippet:
```python
try:
a = 1
except* ValueError:
a = 2
except* ValueError:
a = 2
try:
pass
except* ():
pass
try:
pass
except* 1: # error
pass
try:
raise ValueError
except* ValueError:
raise UserWarning
```
Error messages
Before:
```
$ ruff check --select=B foo.py
foo.py:6:9: B025 try-except block with duplicate exception `ValueError`
foo.py:11:1: B029 Using `except ():` with an empty tuple does not catch anything; add exceptions to handle
foo.py:16:9: B030 `except` handlers should only be exception classes or tuples of exception classes
foo.py:22:5: B904 Within an `except` clause, raise exceptions with `raise ... from err` or `raise ... from None` to distinguish them from errors in exception handling
Found 4 errors.
```
After:
```
$ ruff check --select=B foo.py
foo.py:6:9: B025 try-except* block with duplicate exception `ValueError`
foo.py:11:1: B029 Using `except* ():` with an empty tuple does not catch anything; add exceptions to handle
foo.py:16:9: B030 `except*` handlers should only be exception classes or tuples of exception classes
foo.py:22:5: B904 Within an `except*` clause, raise exceptions with `raise ... from err` or `raise ... from None` to distinguish them from errors in exception handling
Found 4 errors.
```
Closes https://github.com/astral-sh/ruff/issues/14791
---------
Co-authored-by: Micha Reiser <micha@reiser.io>
This adds support for `type[a.X]`, where the `type` special form is
applied to a qualified name that resolves to a class literal. This works
for both nested classes and classes imported from another module.
Closes#14545
## Summary
Inferred and declared types for function parameters, in the function
body scope.
Fixes#13693.
## Test Plan
Added mdtests.
---------
Co-authored-by: Micha Reiser <micha@reiser.io>
Co-authored-by: Alex Waygood <Alex.Waygood@Gmail.com>
## Summary
Airflow 3.0 removes various deprecated functions, members, modules, and
other values. They have been deprecated in 2.x, but the removal causes
incompatibilities that we want to detect. This PR deprecates the
following names.
* in `DAG`
* `sla_miss_callback` was removed
* in `airflow.operators.trigger_dagrun.TriggerDagRunOperator`
* `execution_date` was removed
* in `airflow.operators.weekday.DayOfWeekSensor`,
`airflow.operators.datetime.BranchDateTimeOperator` and
`airflow.operators.weekday.BranchDayOfWeekOperator`
* `use_task_execution_day` was removed in favor of
`use_task_logical_date`
The full list of rules we will extend
https://github.com/apache/airflow/issues/44556
## Test Plan
<!-- How was it tested? -->
A test fixture is included in the PR.
## Summary
`typing.Never` and `typing.LiteralString` are only conditionally
exported from `typing` for Python versions 3.11 and later. We run the
Markdown tests with the default Python version of 3.9, so here we change
the import to `typing_extensions` instead, and add a new test to make
sure we'll continue to understand the `typing`-version of these symbols
for newer versions.
This didn't cause problems so far, as we don't understand
`sys.version_info` branches yet.
## Test Plan
New Markdown tests to make sure this will continue to work in the
future.
## Summary
Fixes https://github.com/astral-sh/ruff/issues/14778
The formatter incorrectly removed the inner implicitly concatenated
string for following single-line f-string:
```py
f"{'aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa' 'a' if True else ""}"
# formatted
f"{ if True else ''}"
```
This happened because I changed the `RemoveSoftlinesBuffer` in
https://github.com/astral-sh/ruff/pull/14489 to remove any content
wrapped in `if_group_breaks`. After all, it emulates an *all flat*
layout. This works fine when `if_group_breaks` is only used to **add**
content if the gorup breaks. It doesn't work if the same content is
rendered differently depending on if the group fits using
`if_group_breaks` and `if_groups_fits` because the enclosing `group`
might still *break* if the entire content exceeds the line-length limit.
This PR fixes this by unwrapping any `if_group_fits` content by removing
the `if_group_fits` start and end tags.
## Test Plan
added test
## Summary
This adds support for specifying the target Python version from a
Markdown test. It is a somewhat limited ad-hoc solution, but designed to
be future-compatible. TOML blocks can be added to arbitrary sections in
the Markdown block. They have the following format:
````markdown
```toml
[tool.knot.environment]
target-version = "3.13"
```
````
So far, there is nothing else that can be configured, but it should be
straightforward to extend this to things like a custom typeshed path.
This is in preparation for the statically-known branches feature where
we are going to have to specify the target version for lots of tests.
## Test Plan
- New Markdown test that fails without the explicitly specified
`target-version`.
- Manually tested various error paths when specifying a wrong
`target-version` field.
- Made sure that running tests is as fast as before.
## Summary
Fixes https://github.com/astral-sh/ruff/issues/14807
I suspect that this broke when we updated notify, although I'm not quiet
sure how this *ever* worked...
The problem was that the file watcher didn't skip over `Access` events,
but Ruff itself accesses the `pyproject.toml` when checking the project.
That means, Ruff triggers `Access` events but it also schedules a
re-check on every `Access` event... and this goes one forever.
This PR skips over `Access` and `Other` event. `Access` events are
uninteresting because they're only reads, they don't change any file
metadata or content.
The `Other` events should be rare and are mainly to inform about file
watcher changes... we don't need those.
I also added an explicit handling for the `Rescan` event. File watchers
emit a `Rescan` event if they failed to capture some file watching
changes
and it signals that the program should assume that all files might have
changed (the program should do a rescan to *get up to date*).
## Test Plan
I tested that Ruff no longer loops when running `check --watch`. I
verified that Ruff rechecks file after making content changes.
## Summary
This is related to #13778, more specifically
https://github.com/astral-sh/ruff/issues/13778#issuecomment-2513556004.
This PR adds various test cases where a keyword is being where an
identifier is expected. The tests are to make sure that red knot doesn't
panic, raises the syntax error and the identifier is added to the symbol
table. The final part allows editor related features like renaming the
symbol.
## Summary
`typing_extensions` has a `>=3.13` re-export for the `typing.NoDefault`
singleton, but not for `typing._NoDefaultType`. This causes problems as
soon as we understand `sys.version_info` branches, so we explicity
switch to `typing._NoDefaultType` for Python 3.13 and later.
This is a part of #14759 that I thought might make sense to break out
and merge in isolation.
## Test Plan
New test that will become more meaningful with #12700
---------
Co-authored-by: Micha Reiser <micha@reiser.io>
## Summary
- Instead of seven (more or less similar) `setup_db` functions, use just
one in a single central place.
- For every test that needs customization beyond that, offer a
`TestDbBuilder` that can control the Python target version, custom
typeshed, and pre-existing files.
The main motivation for this is that we're soon going to need
customization of the Python version, and I didn't feel like adding this
to each of the existing `setup_db` functions.
## Summary
This changeset contains various improvements concerning non-fully-static
types and their relationships:
- Make sure that non-fully-static types do not participate in
equivalence or subtyping.
- Clarify what `Type::is_equivalent_to` actually implements.
- Introduce `Type::is_fully_static`
- New tests making sure that multiple `Any`/`Unknown`s inside unions and
intersections are collapsed.
closes#14524
## Test Plan
- Added new unit tests for union and intersection builder
- Added new unit tests for `Type::is_equivalent_to`
- Added new unit tests for `Type::is_subtype_of`
- Added new property test making sure that non-fully-static types do not
participate in subtyping
We already had a representation for the Any type, which we would use
e.g. for expressions without type annotations. We now recognize
`typing.Any` as a way to refer to this type explicitly. Like other
special forms, this is tracked correctly through aliasing, and isn't
confused with local definitions that happen to have the same name.
Closes#14544
## Summary
Minor change that uses two plain classes `A` and `B` instead of
`typing.Sized` and `typing.Hashable`.
The motivation is twofold: I remember that I was confused when I first
saw this test. Was there anything specific to `Sized` and `Hashable`
that was relevant here? (there is, these classes are not overlapping;
and you can build a proper intersection from them; but that's true for
almost all non-builtin classes).
I now ran into another problem while working on #14758: `Sized` and
`Hashable` are protocols that we don't fully understand yet. This
causing some trouble when trying to infer whether these are fully-static
types or not.
Closes: #14676
I think the consensus generally was to keep the rule as-is, but expand
the docs.
## Summary
Expands the docs for TC006 with an explanation for why the type
expression is always quoted, including mention of another potential
benefit to this style.
