The _private_networks variables, used by various is_private
implementations, were missing some ranges and at the same time had
overly strict ranges (where there are more specific ranges considered
globally reachable by the IANA registries).
This patch updates the ranges with what was missing or otherwise
incorrect.
100.64.0.0/10 is left alone, for now, as it's been made special in [1].
The _address_exclude_many() call returns 8 networks for IPv4, 121
networks for IPv6.
[1] https://github.com/python/cpython/issues/61602
In 3.10 and below, is_private checks whether the network and broadcast
address are both private.
In later versions (where the test wss backported from), it checks
whether they both are in the same private network.
For 0.0.0.0/0, both 0.0.0.0 and 255.225.255.255 are private,
but one is in 0.0.0.0/8 ("This network") and the other in
255.255.255.255/32 ("Limited broadcast").
---------
Co-authored-by: Jakub Stasiak <jakub@stasiak.at>
Allow controlling Expat >=2.6.0 reparse deferral (CVE-2023-52425) by adding five new methods:
- `xml.etree.ElementTree.XMLParser.flush`
- `xml.etree.ElementTree.XMLPullParser.flush`
- `xml.parsers.expat.xmlparser.GetReparseDeferralEnabled`
- `xml.parsers.expat.xmlparser.SetReparseDeferralEnabled`
- `xml.sax.expatreader.ExpatParser.flush`
Based on the "flush" idea from https://github.com/python/cpython/pull/115138#issuecomment-1932444270 .
Includes code suggested-by: Snild Dolkow <snild@sony.com>
and by core dev Serhiy Storchaka.
Co-authored-by: Gregory P. Smith <greg@krypto.org>
Doc/library/xml.rst: Document CVE-2023-52425 under "XML vulnerabilities"
(cherry picked from commit fbd40ce46e)
Co-authored-by: Sebastian Pipping <sebastian@pipping.org>
gh-102153: Start stripping C0 control and space chars in `urlsplit` (GH-102508)
`urllib.parse.urlsplit` has already been respecting the WHATWG spec a bit GH-25595.
This adds more sanitizing to respect the "Remove any leading C0 control or space from input" [rule](https://url.spec.whatwg.org/GH-url-parsing:~:text=Remove%20any%20leading%20and%20trailing%20C0%20control%20or%20space%20from%20input.) in response to [CVE-2023-24329](https://nvd.nist.gov/vuln/detail/CVE-2023-24329).
I simplified the docs by eliding the state of the world explanatory
paragraph in this security release only backport. (people will see
that in the mainline /3/ docs)
(cherry picked from commit 2f630e1ce1)
(cherry picked from commit 610cc0ab1b)
(cherry picked from commit f48a96a280)
Co-authored-by: Illia Volochii <illia.volochii@gmail.com>
Co-authored-by: Gregory P. Smith [Google] <greg@krypto.org>
(cherry picked from commit 1cf3d78c92)
(cherry picked from commit 88fe8d701a)
Co-authored-by: Jeremy Paige <ucodery@gmail.com>
Co-authored-by: Gregory P. Smith <greg@krypto.org>
* [3.9] Update copyright years to 2023. (gh-100848).
(cherry picked from commit 11f99323c2)
Co-authored-by: Benjamin Peterson <benjamin@python.org>
* Update additional copyright years to 2023.
Co-authored-by: Ned Deily <nad@python.org>
* gh-100001: Omit control characters in http.server stderr logs. (GH-100002)
Replace control characters in http.server.BaseHTTPRequestHandler.log_message with an escaped \xHH sequence to avoid causing problems for the terminal the output is printed to.
(cherry picked from commit d8ab0a4dfa)
Co-authored-by: Gregory P. Smith <greg@krypto.org>
* also escape \s (backport of PR #100038).
* add versionadded and remove extra 'to'
Co-authored-by: Gregory P. Smith <greg@krypto.org>
gh-68966: Make mailcap refuse to match unsafe filenames/types/params (GH-91993)
(cherry picked from commit b9509ba7a9)
Co-authored-by: Petr Viktorin <encukou@gmail.com>
Revert params note in urllib.parse.urlparse table
(cherry picked from commit eed80458e8)
Co-authored-by: Stanley <46876382+slateny@users.noreply.github.com>
When ValueError is raised if an integer is larger than the limit,
mention sys.set_int_max_str_digits() in the error message.
(cherry picked from commit e841ffc915)
Co-authored-by: Ned Deily <nad@python.org>
This documents the behavior that has always been the case since timeout
support was introduced in Python 3.3.
(cherry picked from commit b05dd79649)
Co-authored-by: Gregory P. Smith <greg@krypto.org>
* Correctly pre-check for int-to-str conversion (#96537)
Converting a large enough `int` to a decimal string raises `ValueError` as expected. However, the raise comes _after_ the quadratic-time base-conversion algorithm has run to completion. For effective DOS prevention, we need some kind of check before entering the quadratic-time loop. Oops! =)
The quick fix: essentially we catch _most_ values that exceed the threshold up front. Those that slip through will still be on the small side (read: sufficiently fast), and will get caught by the existing check so that the limit remains exact.
The justification for the current check. The C code check is:
```c
max_str_digits / (3 * PyLong_SHIFT) <= (size_a - 11) / 10
```
In GitHub markdown math-speak, writing $M$ for `max_str_digits`, $L$ for `PyLong_SHIFT` and $s$ for `size_a`, that check is:
$$\left\lfloor\frac{M}{3L}\right\rfloor \le \left\lfloor\frac{s - 11}{10}\right\rfloor$$
From this it follows that
$$\frac{M}{3L} < \frac{s-1}{10}$$
hence that
$$\frac{L(s-1)}{M} > \frac{10}{3} > \log_2(10).$$
So
$$2^{L(s-1)} > 10^M.$$
But our input integer $a$ satisfies $|a| \ge 2^{L(s-1)}$, so $|a|$ is larger than $10^M$. This shows that we don't accidentally capture anything _below_ the intended limit in the check.
<!-- gh-issue-number: gh-95778 -->
* Issue: gh-95778
<!-- /gh-issue-number -->
Co-authored-by: Gregory P. Smith [Google LLC] <greg@krypto.org>
Co-authored-by: Christian Heimes <christian@python.org>
Co-authored-by: Mark Dickinson <dickinsm@gmail.com>
It fixes 252 errors from a Sphinx nitpicky run (sphinx-build -n). But
there's 8182 errors left.
Co-authored-by: Ezio Melotti <ezio.melotti@gmail.com>
(cherry picked from commit 664aa94b57)
Co-authored-by: Julien Palard <julien@palard.fr>
* Some handlers were wrongly described as text-encoding only, but actually they can also be used in text-decoding.
* Add more description to each handler.
* Add two REPL examples.
* Add indexes for Error Handler's name.
Co-authored-by: Kyle Stanley <aeros167@gmail.com>
Co-authored-by: Victor Stinner <vstinner@python.org>
Co-authored-by: Jelle Zijlstra <jelle.zijlstra@gmail.com>
(cherry picked from commit 5bc2390229)
Co-authored-by: Ma Lin <animalize@users.noreply.github.com>
