gh-119050: Add XML support to libregrtest refleak checker (#119148)
regrtest test runner: Add XML support to the refleak checker
(-R option).
* run_unittest() now stores XML elements as string, rather than
objects, in support.junit_xml_list.
* runtest_refleak() now saves/restores XML strings before/after
checking for reference leaks. Save XML into a temporary file.
(cherry picked from commit 9257731f5d)
* gh-115122: Add --bisect option to regrtest (#115123)
* test.bisect_cmd now exit with code 0 on success, and code 1 on
failure. Before, it was the opposite.
* test.bisect_cmd now runs the test worker process with
-X faulthandler.
* regrtest RunTests: Add create_python_cmd() and bisect_cmd()
methods.
(cherry picked from commit 1e5719a663)
* gh-115720: Show number of leaks in huntrleaks progress reports (GH-115726)
Instead of showing a dot for each iteration, show:
- '.' for zero (on negative) leaks
- number of leaks for 1-9
- 'X' if there are more leaks
This allows more rapid iteration: when bisecting, I don't need
to wait for the final report to see if the test still leaks.
Also, show the full result if there are any non-zero entries.
This shows negative entries, for the unfortunate cases where
a reference is created and cleaned up in different runs.
Test *failure* is still determined by the existing heuristic.
(cherry picked from commit af5f9d682c)
* gh-83434: Disable XML in regrtest when -R option is used (#117232)
(cherry picked from commit d52bdfb19f)
---------
Co-authored-by: Petr Viktorin <encukou@gmail.com>
gh-110367: Make regrtest --verbose3 compatible with --huntrleaks -jN (GH-111577)
"./python -m test -j1 -R 3:3 --verbose3" now works as expected, since
run_single_test() does not replace sys.stdout with StringIO in this
case.
(cherry picked from commit d9a5530d23)
Co-authored-by: Victor Stinner <vstinner@python.org>
Test case matching patterns specified by options --match, --ignore,
--matchfile and --ignorefile are now tested in the order of
specification, and the last match determines whether the test case be run
or ignored.
(cherry picked from commit 9a1fe09622)
regrtest: Prepend 'use' options in --{fast,slow}-ci (GH-110363)
This allows individual resources to be disabled without having to explicitly re-enable all others.
(cherry picked from commit b75186f69e)
Co-authored-by: Zachary Ware <zach@python.org>
gh-110756: Sync regrtest with main branch
Copy files from main to this branch:
* Lib/test/libregrtest/*.py
* Lib/test/__init__.py
* Lib/test/__main__.py
* Lib/test/autotest.py
* Lib/test/pythoninfo.py
* Lib/test/regrtest.py
* Lib/test/test_regrtest.py
Do not modify scripts running tests such as Makefile.pre.in,
.github/workflows/build.yml or Tools/scripts/run_tests.py: do not use
--fast-ci and --slow-ci in this change.
Changes:
* SPLITTESTDIRS: don't include test_inspect.
* Add utils.process_cpu_count() using len(os.sched_getaffinity(0)).
* test_regrtest doesn't use @support.without_optimizer which doesn't
exist in Python 3.12.
* Add support.set_sanitizer_env_var().
* Update test_faulthandler to use support.set_sanitizer_env_var().
* gh-108834: regrtest reruns failed tests in subprocesses (#108839)
When using --rerun option, regrtest now re-runs failed tests
in verbose mode in fresh worker processes to have more
deterministic behavior. So it can write its final report even
if a test killed a worker progress.
Add --fail-rerun option to regrtest: exit with non-zero exit code
if a test failed pass passed when re-run in verbose mode (in a
fresh process). That's now more useful since tests can pass
when re-run in a fresh worker progress, whereas they failed
when run after other tests when tests are run sequentially.
Rename --verbose2 option (-w) to --rerun. Keep --verbose2 as a
deprecated alias.
Changes:
* Fix and enhance statistics in regrtest summary. Add "(filtered)"
when --match and/or --ignore options are used.
* Add RunTests class.
* Add TestResult.get_rerun_match_tests() method
* Rewrite code to serialize/deserialize worker arguments as JSON
using a new WorkerJob class.
* Fix stats when a test is run with --forever --rerun.
* If failed test names cannot be parsed, log a warning and don't
filter tests.
* test_regrtest.test_rerun_success() now uses a marker file, since
the test is re-run in a separated process.
* Add tests on normalize_test_name() function.
* Add test_success() and test_skip() tests to test_regrtest.
(cherry picked from commit 31c2945f14)
* gh-108834: regrtest --fail-rerun exits with code 5 (#108896)
When the --fail-rerun option is used and a test fails and then pass,
regrtest now uses exit code 5 ("rerun) instead of 2 ("bad test").
(cherry picked from commit 1170d5a292)
* gh-108416: Mark slow but not CPU bound test methods with requires_resource('walltime') (GH-108480)
(cherry picked from commit 1e0d62793a)
* Manually sync Lib/test/libregrtest/ from main
---------
Co-authored-by: Serhiy Storchaka <storchaka@gmail.com>
Remove the --findleaks command line option of regrtest: use the
--fail-env-changed option instead. Since Python 3.7, it was a
deprecated alias to the --fail-env-changed option.
support.print_warning() now stores the original value of
sys.__stderr__ and uses it to log warnings. libregrtest uses the same
stream to log unraisable exceptions and uncaught threading
exceptions.
Partially revert commit dbe213de7e:
libregrtest no longer replaces sys.__stdout__, sys.__stderr__, and
stdout and stderr file descriptors.
Remove also a few unused imports in libregrtest.
* Move to a static argparse.Namespace subclass
* Roughly annotate runtest.py
* Refactor libregrtest to use lossless test result objects
* Only re-run test methods that match names of previously failing test methods
* Adopt tests to cover test method name matching
Co-authored-by: Pablo Galindo Salgado <Pablogsal@gmail.com>
When building Python in some uncommon platforms there are some known tests that will fail. Right now, the test suite has the ability to ignore entire tests using the -x option and to receive a filter file using the --matchfile filter. The problem with the --matchfile option is that it receives a file with patterns to accept and when you want to ignore a couple of tests and subtests, is too cumbersome to lists ALL tests that are not the ones that you want to accept and he problem with -x is that is not easy to ignore just a subtests that fail and the whole test needs to be ignored.
For these reasons, add a new option to allow to ignore a list of test and subtests for these situations.
Reduce the number of unit tests run for the PGO generation task. This
speeds up the task by a factor of about 15x. Running the full unit test
suite is slow. This change may result in a slightly less optimized build
since not as many code branches will be executed. If you are willing to
wait for the much slower build, the old behavior can be restored using
'./configure [..] PROFILE_TASK="-m test --pgo-extended"'. We make no
guarantees as to which PGO task set produces a faster build. Users who
care should run their own relevant benchmarks as results can depend on
the environment, workload, and compiler tool chain.
* regrtest: Add --cleanup option to remove "test_python_*" directories
of previous failed test jobs.
* Add "make cleantest" to run "python3 -m test --cleanup".
"python3 -m test -jN ..." now continues the execution of next tests
when a worker process crash (CHILD_ERROR state). Previously, the test
suite stopped immediately. Use --failfast to stop at the first error.
Moreover, --forever now also implies --failfast.
regrtest now always detects uncollectable objects. Previously, the
check was only enabled by --findleaks. The check now also works with
-jN/--multiprocess N.
--findleaks becomes a deprecated alias to --fail-env-changed.
kB (*kilo* byte) unit means 1000 bytes, whereas KiB ("kibibyte")
means 1024 bytes. KB was misused: replace kB or KB with KiB when
appropriate.
Same change for MB and GB which become MiB and GiB.
Change the output of Tools/iobench/iobench.py.
Round also the size of the documentation from 5.5 MB to 5 MiB.
When running the test suite using --use=all / -u all, exclude tzdata
since it makes test_datetime too slow (15-20 min on some buildbots)
which then times out on some buildbots.
-u tzdata must now be enabled explicitly, -u tzdata or -u all,tzdata,
to run all test_datetime tests.
Fix also regrtest command line parser to allow passing -u
extralargefile to run test_zipfile64.
Travis CI: remove -tzdata. Replace -u all,-tzdata,-cpu with -u all,-cpu since tzdata is now excluded from -u all.
* bpo-30764: regrtest: change exit code on failure
* Exit code 2 if failed tests ("bad")
* Exit code 3 if interrupted
* bpo-30764: regrtest: add --fail-env-changed option
If the option is set, mark a test as failed if it alters the
environment, for example if it creates a file without removing it.
* Add a new option taking a filename to get a list of test names to
filter tests.
* support.match_tests becomes a list.
* Modify run_unittest() to accept to match the whole test identifier,
not just a part of a test identifier.
For example, the following command only runs test_default_timeout()
of the BarrierTests class of test_threading:
$ ./python -m test -v test_threading -m test.test_threading.BarrierTests.test_default_timeout
Remove also some empty lines from test_regrtest.py to make flake8
tool happy.
* regrtest now uses subprocesses when the -j1 command line option
is used: each test file runs in a fresh child process. Before, the -j1 option
was ignored.
* Tools/buildbot/test.bat script now uses -j1 by default to run
each test file in fresh child process.
Slaves (child processes running tests for regrtest -jN) now inherit
--memlimit/-M, --threshold/-t and --nowindows/-n options.
* -M, -t and -n are now supported with -jN
* Factorize code to run tests.
* run_test_in_subprocess() now pass the whole "ns" namespace to the child
process.
Start to split regrtest.py into smaller parts with the creation of
Lib/test/libregrtest/cmdline.py: code to handle the command line, especially
parsing command line arguments. This part of the code is tested by
test_regrtest.
