This change rejiggers how we register globs for file watching with the
LSP client. Previously, we registered a few globs like `**/*.py`,
`**/pyproject.toml` and more. There were two problems with this
approach.
Firstly, it only watches files within the project root. Search paths may
be outside the project root. Such as virtualenv directory.
Secondly, there is variation on how tools interact with virtual
environments. In the case of uv, depending on its link mode, we might
not get any file change notifications after running `uv add foo` or
`uv remove foo`.
To remedy this, we instead just list for file change notifications on
all files for all search paths. This simplifies the globs we use, but
does potentially increase the number of notifications we'll get.
However, given the somewhat simplistic interface supported by the LSP
protocol, I think this is unavoidable (unless we used our own file
watcher, which has its own considerably downsides). Moreover, this is
seemingly consistent with how `ty check --watch` works.
This also required moving file watcher registration to *after*
workspaces are initialized, or else we don't know what the right search
paths are.
This change is in service of #19883, which in order for cache
invalidation to work right, the LSP client needs to send notifications
whenever a dependency is added or removed. This change should make that
possible.
I tried this patch with #19883 in addition to my work to activate Salsa
caching, and everything seems to work as I'd expect. That is,
completions no longer show stale results after a dependency is added or
removed.
## Summary
This PR is a follow-up from https://github.com/astral-sh/ruff/pull/19551
and adds a new `ty.experimental.rename` setting to conditionally
register for the rename capability. The complementary PR in ty VS Code
extension is https://github.com/astral-sh/ty-vscode/pull/111.
This is done using dynamic registration after the settings have been
resolved. The experimental group is part of the global settings because
they're applied for all workspaces that are managed by the client.
## Test Plan
Add E2E tests.
In VS Code, with the following setting:
```json
{
"ty.experimental.rename": "true",
"python.languageServer": "None"
}
```
I get the relevant log entry:
```
2025-08-07 16:05:40.598709000 DEBUG client_response{id=3 method="client/registerCapability"}: Registered rename capability
```
And, I'm able to rename a symbol. Once I set it to `false`, then I can
see this log entry:
```
2025-08-07 16:08:39.027876000 DEBUG Rename capability is disabled in the client settings
```
And, I don't see the "Rename Symbol" open in the VS Code dropdown.
https://github.com/user-attachments/assets/501659df-ba96-4252-bf51-6f22acb4920b
This PR adds support for the "rename" language server feature. It builds
upon existing functionality used for "go to references".
The "rename" feature involves two language server requests. The first is
a "prepare rename" request that determines whether renaming should be
possible for the identifier at the current offset. The second is a
"rename" request that returns a list of file ranges where the rename
should be applied.
Care must be taken when attempting to rename symbols that span files,
especially if the symbols are defined in files that are not part of the
project. We don't want to modify code in the user's Python environment
or in the vendored stub files.
I found a few bugs in the "go to references" feature when implementing
"rename", and those bug fixes are included in this PR.
---------
Co-authored-by: UnboundVariable <unbound@gmail.com>
## Summary
This PR implements support for providing LSP client settings.
The complementary PR in the ty VS Code extension:
astral-sh/ty-vscode#106.
Notes for the previous iteration of this PR is in
https://github.com/astral-sh/ruff/pull/19614#issuecomment-3136477864
(click on "Details").
Specifically, this PR splits the client settings into 3 distinct groups.
Keep in mind that these groups are not visible to the user, they're
merely an implementation detail. The groups are:
1. `GlobalOptions` - these are the options that are global to the
language server and will be the same for all the workspaces that are
handled by the server
2. `WorkspaceOptions` - these are the options that are specific to a
workspace and will be applied only when running any logic for that
workspace
3. `InitializationOptions` - these are the options that can be specified
during initialization
The initialization options are a superset that contains both the global
and workspace options flattened into a 1-dimensional structure. This
means that the user can specify any and all fields present in
`GlobalOptions` and `WorkspaceOptions` in the initialization options in
addition to the fields that are _specific_ to initialization options.
From the current set of available settings, following are only available
during initialization because they are required at that time, are static
during the runtime of the server and changing their values require a
restart to take effect:
- `logLevel`
- `logFile`
And, following are available under `GlobalOptions`:
- `diagnosticMode`
And, following under `WorkspaceOptions`:
- `disableLanguageServices`
- `pythonExtension` (Python environment information that is populated by
the ty VS Code extension)
### `workspace/configuration`
This request allows server to ask the client for configuration to a
specific workspace. But, this is only supported by the client that has
the `workspace.configuration` client capability set to `true`. What to
do for clients that don't support pulling configurations?
In that case, the settings needs to be provided in the initialization
options and updating the values of those settings can only be done by
restarting the server. With the way this is implemented, this means that
if the client does not support pulling workspace configuration then
there's no way to specify settings specific to a workspace. Earlier,
this would've been possible by providing an array of client options with
an additional field which specifies which workspace the options belong
to but that adds complexity and clients that actually do not support
`workspace/configuration` would usually not support multiple workspaces
either.
Now, for the clients that do support this, the server will initiate the
request to get the configuration for all the workspaces at the start of
the server. Once the server receives these options, it will resolve them
for each workspace as follows:
1. Combine the client options sent during initialization with the
options specific to the workspace creating the final client options
that's specific to this workspace
2. Create a global options by combining the global options from (1) for
all workspaces which in turn will also combine the global options sent
during initialization
The global options are resolved into the global settings and are
available on the `Session` which is initialized with the default global
settings. The workspace options are resolved into the workspace settings
and are available on the respective `Workspace`.
The `SessionSnapshot` contains the global settings while the document
snapshot contains the workspace settings. We could add the global
settings to the document snapshot but that's currently not needed.
### Document diagnostic dynamic registration
Currently, the document diagnostic server capability is created based on
the `diagnosticMode` sent during initialization. But, that wouldn't
provide us with the complete picture. This means the server needs to
defer registering the document diagnostic capability at a later point
once the settings have been resolved.
This is done using dynamic registration for clients that support it. For
clients that do not support dynamic registration for document diagnostic
capability, the server advertises itself as always supporting workspace
diagnostics and work done progress token.
This dynamic registration now allows us to change the server capability
for workspace diagnostics based on the resolved `diagnosticMode` value.
In the future, once `workspace/didChangeConfiguration` is supported, we
can avoid the server restart when users have changed any client
settings.
## Test Plan
Add integration tests and recorded videos on the user experience in
various editors:
### VS Code
For VS Code users, the settings experience is unchanged because the
extension defines it's own interface on how the user can specify the
server setting. This means everything is under the `ty.*` namespace as
usual.
https://github.com/user-attachments/assets/c2e5ba5c-7617-406e-a09d-e397ce9c3b93
### Zed
For Zed, the settings experience has changed. Users can specify settings
during initialization:
```json
{
"lsp": {
"ty": {
"initialization_options": {
"logLevel": "debug",
"logFile": "~/.cache/ty.log",
"diagnosticMode": "workspace",
"disableLanguageServices": true
}
},
}
}
```
Or, can specify the options under the `settings` key:
```json
{
"lsp": {
"ty": {
"settings": {
"ty": {
"diagnosticMode": "openFilesOnly",
"disableLanguageServices": true
}
},
"initialization_options": {
"logLevel": "debug",
"logFile": "~/.cache/ty.log"
}
},
}
}
```
The `logLevel` and `logFile` setting still needs to go under the
initialization options because they're required by the server during
initialization.
We can remove the nesting of the settings under the "ty" namespace by
updating the return type of
db9ea0cdfd/src/tychecker.rs (L45-L49)
to be wrapped inside `ty` directly so that users can avoid doing the
double nesting.
There's one issue here which is that if the `diagnosticMode` is
specified in both the initialization option and settings key, then the
resolution is a bit different - if either of them is set to be
`workspace`, then it wins which means that in the following
configuration, the diagnostic mode is `workspace`:
```json
{
"lsp": {
"ty": {
"settings": {
"ty": {
"diagnosticMode": "openFilesOnly"
}
},
"initialization_options": {
"diagnosticMode": "workspace"
}
},
}
}
```
This behavior is mainly a result of combining global options from
various workspace configuration results. Users should not be able to
provide global options in multiple workspaces but that restriction
cannot be done on the server side. The ty VS Code extension restricts
these global settings to only be set in the user settings and not in
workspace settings but we do not control extensions in other editors.
https://github.com/user-attachments/assets/8e2d6c09-18e6-49e5-ab78-6cf942fe1255
### Neovim
Same as in Zed.
### Other
Other editors that do not support `workspace/configuration`, the users
would need to provide the server settings during initialization.
2025-08-06 18:37:21 +05:30
Renamed from crates/ty_server/src/session/capabilities.rs (Browse further)
