## Summary
Fixes https://github.com/astral-sh/ty/issues/1242
From finding references with the LSP, `FileResolver::path` is only
called once, in `UnifiedFile::path`, so I went through those references,
and it looked safe to make this change in every case. Most of the
references are in the various output formats, where we inherited the
absolute vs relative path decision from Ruff. Two other uses are as
fallbacks if converting a relativized path to a string fails. Finally,
we use the path for sorting and in `UnifiedFile::relative_path`.
## Test Plan
Existing tests, with snapshots updated to show absolute paths (in the
`TestDb` this just added a `/` in front of the file names). I also
updated the GitLab CLI test to set the `CI_PROJECT_DIR` environment
variable and ran a test in GitLab CI:
<img width="613" height="114" alt="image"
src="https://github.com/user-attachments/assets/8ab81dba-54fd-4a24-9110-77ef89293cff"
/>
The names of the submodules returned should be *complete*. This
is the contract of `Module::name`. However, we were previously
only returning the basename of the submodule.
## Summary
This PR wires up the GitHub output format moved to `ruff_db` in #20320
to the ty CLI.
It's a bit smaller than the GitLab version (#20155) because some of the
helpers were already in place, but I did factor out a few
`DisplayDiagnosticConfig` constructor calls in Ruff. I also exposed the
`GithubRenderer` and a wrapper `DisplayGithubDiagnostics` type because
we needed a way to configure the program name displayed in the GitHub
diagnostics. This was previously hard-coded to `Ruff`:
<img width="675" height="247" alt="image"
src="https://github.com/user-attachments/assets/592da860-d2f5-4abd-bc5a-66071d742509"
/>
Another option would be to drop the program name in the output format,
but I think it can be helpful in workflows with multiple programs
emitting annotations (such as Ruff and ty!)
## Test Plan
New CLI test, and a manual test with `--config 'terminal.output-format =
"github"'`
## Summary
I felt it was safer to add the `python` folder *in addition* to a
possibly-existing `src` folder, even though the `src` folder only
contains Rust code for `maturin`-based projects. There might be
non-maturin projects where a `python` folder exists for other reasons,
next to a normal `src` layout.
closes https://github.com/astral-sh/ty/issues/1120
## Test Plan
Tested locally on the egglog-python project.
This is to facilitate recursive traversal of all modules in an
environment. This way, we can keep asking for submodules.
This also simplifies how this is used in completions, and probably makes
it faster. Namely, since we return the `Module` itself, callers don't
need to invoke the full module resolver just to get the module type.
Note that this doesn't include namespace packages. (Which were
previously not supported in `Module::all_submodules`.) Given how they
can be spread out across multiple search paths, they will likely require
special consideration here.
## Summary
This wires up the GitLab output format moved into `ruff_db` in
https://github.com/astral-sh/ruff/pull/20117 to the ty CLI.
While I was here, I made one unrelated change to the CLI docs. Clap was
rendering the escapes around the `\[default\]` brackets for the `full`
output, so I just switched those to parentheses:
```
--output-format <OUTPUT_FORMAT>
The format to use for printing diagnostic messages
Possible values:
- full: Print diagnostics verbosely, with context and helpful hints \[default\]
- concise: Print diagnostics concisely, one per line
- gitlab: Print diagnostics in the JSON format expected by GitLab Code Quality reports
```
## Test Plan
New CLI test, and a manual test with `--config 'terminal.output-format =
"gitlab"'` to make sure this works as a configuration option too. I also
tried piping the output through jq to make sure it's at least valid JSON
This is a port of the logic in https://github.com/astral-sh/uv/pull/7691
The basic idea is we use CONDA_DEFAULT_ENV as a signal for whether
CONDA_PREFIX is just the ambient system conda install, or the user has
explicitly activated a custom one. If the former, then the conda is
treated like a system install (having lowest priority). If the latter,
the conda is treated like an activated venv (having priority over
everything but an Actual activated venv).
Fixes https://github.com/astral-sh/ty/issues/611
## Summary
This PR moves most of the work of rendering concise diagnostics in Ruff
into `ruff_db`, where the code is shared with ty. To accomplish this
without breaking backwards compatibility in Ruff, there are two main
changes on the `ruff_db`/ty side:
- Added the logic from Ruff for remapping notebook line numbers to cells
- Reordered the fields in the diagnostic to match Ruff and rustc
```text
# old
error[invalid-assignment] try.py:3:1: Object of type `Literal[1]` is not
assignable to `str`
# new
try.py:3:1: error[invalid-assignment]: Object of type `Literal[1]` is
not assignable to `str`
```
I don't think the notebook change failed any tests on its own, and only
a handful of snaphots changed in ty after reordering the fields, but
this will obviously affect any other uses of the concise format, outside
of tests, too.
The other big change should only affect Ruff:
- Added three new `DisplayDiagnosticConfig` options
Micha and I hoped that we could get by with one option
(`hide_severity`), but Ruff also toggles `show_fix_status` itself,
independently (there are cases where we want neither severity nor the
fix status), and during the implementation I realized we also needed
access to an `Applicability`. The main goal here is to suppress the
severity (`error` above) because ruff only uses the `error` severity and
to use the secondary/noqa code instead of the line name
(`invalid-assignment` above).
```text
# ty - same as "new" above
try.py:3:1: error[invalid-assignment]: Object of type `Literal[1]` is
not assignable to `str`
# ruff
try.py:3:1: RUF123 [*] Object of type `Literal[1]` is not assignable to
`str`
```
This part of the concise diagnostic is actually shared with the `full`
output format in Ruff, but with the settings above, there are no
snapshot changes to either format.
## Test Plan
Existing tests with the handful of updates mentioned above, as well as
some new tests in the `concise` module.
Also this PR. Swapping the fields might have broken mypy_primer, unless
it occasionally times out on its own.
I also ran this script in the root of my Ruff checkout, which also has
CPython in it:
```shell
flags=(--isolated --no-cache --no-respect-gitignore --output-format concise .)
diff <(target/release/ruff check ${flags[@]} 2> /dev/null) \
<(ruff check ${flags[@]} 2> /dev/null)
```
This yielded an expected diff due to some t-string error changes on main
since 0.12.4:
```diff
33622c33622
< crates/ruff_python_parser/resources/inline/err/f_string_lambda_without_parentheses.py:1:15: SyntaxError: Expected an element of or the end of the f-string
---
> crates/ruff_python_parser/resources/inline/err/f_string_lambda_without_parentheses.py:1:15: SyntaxError: Expected an f-string or t-string element or the end of the f-string or t-string
33742c33742
< crates/ruff_python_parser/resources/inline/err/implicitly_concatenated_unterminated_string_multiline.py:4:1: SyntaxError: Expected an element of or the end of the f-string
---
> crates/ruff_python_parser/resources/inline/err/implicitly_concatenated_unterminated_string_multiline.py:4:1: SyntaxError: Expected an f-string or t-string element or the end of the f-string or t-string
34131c34131
< crates/ruff_python_parser/resources/inline/err/t_string_lambda_without_parentheses.py:2:15: SyntaxError: Expected an element of or the end of the t-string
---
> crates/ruff_python_parser/resources/inline/err/t_string_lambda_without_parentheses.py:2:15: SyntaxError: Expected an f-string or t-string element or the end of the f-string or t-string
```
So modulo color, the results are identical on 38,186 errors in our test
suite and CPython 3.10.
---------
Co-authored-by: David Peter <mail@david-peter.de>
This change makes it so we aren't doing a directory traversal every time
we ask for completions from a module. Specifically, submodules that
aren't attributes of their parent module can only be discovered by
looking at the directory tree. But we want to avoid doing a directory
scan unless we think there are changes.
To make this work, this change does a little bit of surgery to
`FileRoot`. Previously, a `FileRoot` was only used for library search
paths. Its revision was bumped whenever a file in that tree was added,
deleted or even modified (to support the discovery of `pth` files and
changes to its contents). This generally seems fine since these are
presumably dependency paths that shouldn't change frequently.
In this change, we add a `FileRoot` for the project. But having the
`FileRoot`'s revision bumped for every change in the project makes
caching based on that `FileRoot` rather ineffective. That is, cache
invalidation will occur too aggressively. To the point that there is
little point in adding caching in the first place. To mitigate this, a
`FileRoot`'s revision is only bumped on a change to a child file's
contents when the `FileRoot` is a `LibrarySearchPath`. Otherwise, we
only bump the revision when a file is created or added.
The effect is that, at least in VS Code, when a new module is added or
removed, this change is picked up and the cache is properly invalidated.
Other LSP clients with worse support for file watching (which seems to
be the case for the CoC vim plugin that I use) don't work as well. Here,
the cache is less likely to be invalidated which might cause completions
to have stale results. Unless there's an obvious way to fix or improve
this, I propose punting on improvements here for now.
## Summary
Fixes https://github.com/astral-sh/ty/issues/640. If a user passes
`--python=<some-virtual-environment>/bin/python`, we must avoid
canonicalizing the path until we've traversed upwards to find the
`sys.prefix` directory (`<some-virtual-environment>`). On Unix systems,
`<sys.prefix>/bin/python` is often a symlink to a system interpreter; if
we resolve the symlink too easily then we'll add the system
interpreter's `site-packages` directory as a search path rather than the
virtual environment's directory.
## Test Plan
I added an integration test to
`crates/ty/tests/cli/python_environment.rs` which fails on `main`. I
also manually tested locally that running `cargo run -p ty check foo.py
--python=.venv/bin/python -vv` now prints this log to the terminal
```
2025-06-20 18:35:24.57702 DEBUG Resolved site-packages directories for this virtual environment are: SitePackagesPaths({"/Users/alexw/dev/ruff/.venv/lib/python3.13/site-packages"})
```
Whereas it previously resolved `site-packages` to my system
intallation's `site-packages` directory
## Summary
Fixes https://github.com/astral-sh/ty/issues/556.
On Windows, system installations have different layouts to virtual
environments. In Windows virtual environments, the Python executable is
found at `<sys.prefix>/Scripts/python.exe`. But in Windows system
installations, the Python executable is found at
`<sys.prefix>/python.exe`. That means that Windows users were able to
point to Python executables inside virtual environments with the
`--python` flag, but they weren't able to point to Python executables
inside system installations.
This PR fixes that issue. It also makes a couple of other changes:
- Nearly all `sys.prefix` resolution is moved inside `site_packages.rs`.
That was the original design of the `site-packages` resolution logic,
but features implemented since the initial implementation have added
some resolution and validation to `resolver.rs` inside the module
resolver. That means that we've ended up with a somewhat confusing code
structure and a situation where several checks are unnecessarily
duplicated between the two modules.
- I noticed that we had quite bad error messages if you e.g. pointed to
a path that didn't exist on disk with `--python` (we just gave a
somewhat impenetrable message saying that we "failed to canonicalize"
the path). I improved the error messages here and added CLI tests for
`--python` and the `environment.python` configuration setting.
## Test Plan
- Existing tests pass
- Added new CLI tests
- I manually checked that virtual-environment discovery still works if
no configuration is given
- Micha did some manual testing to check that pointing `--python` to a
system-installation executable now works on Windows
## Summary
Fix remaining `knot.toml` reference and replace it with `ty.toml`. This
change was probably still in flight while we renamed things.
## Test Plan
Added a second assertion which ensures that the config file has any
effect.
## Summary
I think `division-by-zero` is a low-value diagnostic in general; most
real division-by-zero errors (especially those that are less obvious to
the human eye) will occur on values typed as `int`, in which case we
don't issue the diagnostic anyway. Mypy and pyright do not emit this
diagnostic.
Currently the diagnostic is prone to false positives because a) we do
not silence it in unreachable code, and b) we do not implement narrowing
of literals from inequality checks. We will probably fix (a) regardless,
but (b) is low priority apart from division-by-zero.
I think we have many more important things to do and should not allow
false positives on a low-value diagnostic to be a distraction. Not
opposed to re-enabling this diagnostic in future when we can prioritize
reducing its false positives.
References https://github.com/astral-sh/ty/issues/443
## Test Plan
Existing tests.
Closes https://github.com/astral-sh/ty/issues/453.
## Summary
Add an additional info diagnostic to `unresolved-import` check to hint
to users that they should make sure their Python environment is properly
configured for ty, linking them to the corresponding doc. This
diagnostic is only shown when an import is not relative, e.g., `import
maturin` not `import .maturin`.
## Test Plan
Updated snapshots with new info message and reran tests.
