## Summary
Thread visitors through the rest of `apply_type_mapping`: callable and
protocol types.
## Test Plan
Added mdtest that previously stack overflowed.
## Summary
We have the ability to defer type inference of some parts of
definitions, so as to allow us to create a type that may need to be
recursively referenced in those other parts of the definition.
We also have the ability to do type inference in a context where all
name resolution should be deferred (that is, names should be looked up
from all-reachable-definitions rather than from the location of use.)
This is used for all annotations in stubs, or if `from __future__ import
annotations` is active.
Previous to this PR, these two concepts were linked: deferred-inference
always implied deferred-name-resolution, though we also supported
deferred-name-resolution without deferred-inference, via
`DeferredExpressionState`.
For the upcoming `typing.TypeAlias` support, I will defer inference of
the entire RHS of the alias (so as to support cycles), but that doesn't
imply deferred name resolution; at runtime, the RHS of a name annotated
as `typing.TypeAlias` is executed eagerly.
So this PR fully de-couples the two concepts, instead explicitly setting
the `DeferredExpressionState` in those cases where we should defer name
resolution.
It also fixes a long-standing related bug, where we were deferring name
resolution of all names in class bases, if any of the class bases
contained a stringified annotation.
## Test Plan
Added test that failed before this PR.
## Summary
Fuzzer seed 208 seems to be timing out all fuzzer runs on PRs today.
This has happened on multiple unrelated PRs, as well as on an initial
version of this PR that made a comment-only change in ty and didn't skip
any seeds, so the timeout appears to be consistent in CI, on ty main
branch, as of today, but it started happening due to some change in a
factor outside ty; not sure what.
I checked the code generated for seed 208 locally, and it takes about
30s to check on current ty main branch. This is slow for a fuzzer seed,
but shouldn't be slow enough to make it time out after 20min in CI (even
accounting for GH runners being slower than my laptop.)
I tried to bisect the slowness of checking that code locally, but I
didn't go back far enough to find the change that made it slow. In fact
it seems like it became significantly faster in the last few days (on an
older checkout I had to stop it after several minutes.) So whatever the
cause of the slowness, it's not a recent change in ty.
I don't want to rabbit-hole on this right now (fuzzer-discovered issues
are lower-priority than real-world-code issues), and need a working CI,
so skip this seed for now until we can investigate it.
## Test Plan
CI. This PR contains a no-op (comment) change in ty, so that the fuzz
test is triggered in CI and we can verify it now works (as well as
verify, on the previous commit, that the fuzzer job is timing out on
that seed, even with just a no-op change in ty.)
Reverts astral-sh/ruff#20156. As @sharkdp noted in his post-merge
review, there were several issues with that PR that I didn't spot before
merging — but I'm out for four days now, and would rather not leave
things in an inconsistent state for that long. I'll revisit this on
Wednesday.
## Summary
These projects all check successfully now.
(Pandas still takes 9s, as the comment in `bad.txt` said, but I don't
think this is slow enough to exclude it; mypy-primer overall still runs
in 4 minutes, faster than e.g. the test suite on Windows.)
## Test Plan
mypy-primer CI.
## Summary
This error is about assigning to attributes rather than reading
attributes, so I think `invalid-assignment` makes more sense than
`invalid-attribute-access`
## Test Plan
existing mdtests updated
## Summary
In `is_disjoint_from_impl`, we should unpack type aliases before we
check `TypedDict`. This change probably doesn't have any visible effect
until we have a more discriminating implementation of disjointness for
`TypedDict`, but making the change now can avoid some confusion/bugs in
future.
In `type_ordering.rs`, we should order `TypedDict` near more similar
types, and leave Union/Intersection together at the end of the list.
This is not necessary for correctness, but it's more consistent and it
could have saved me some confusion trying to figure out why I was only
getting an unreachable panic when my code example included a `TypedDict`
type.
## Test Plan
None besides existing tests.
## Summary
Now that we have `Type::TypeAlias`, which can wrap a union, and the
possibility of unions including non-unpacked type aliases (which is
necessary to support recursive type aliases), we can no longer assume in
`UnionType::normalized_impl` that normalizing each element of an
existing union will result in a set of elements that we can order and
then place raw into `UnionType` to create a normalized union. It's now
possible for those elements to themselves include union types (unpacked
from an alias). So instead, we need to feed those elements into the full
`UnionBuilder` (with alias-unpacking turned on) to flatten/normalize
them, and then order them.
## Test Plan
Added mdtest.
---------
Co-authored-by: Alex Waygood <Alex.Waygood@Gmail.com>
## Summary
This PR fixes#7352 by exposing the `show_fix_diff` option used in our
snapshot tests in the CLI. As the issue suggests, we plan to make this
the default output format in the future, so this is added to the `full`
output format in preview for now.
This turned out to be pretty straightforward. I just used our existing
`Applicability` settings to determine whether or not to print the diff.
The snapshot differences are because we now set
`Applicability::DisplayOnly` for our snapshot tests. This
`Applicability` is also used to determine whether or not the fix icon
(`[*]`) is rendered, so this is now shown for display-only fixes in our
snapshots. This was already the case previously, but we were only
setting `Applicability::Unsafe` in these tests and ignoring the
`Applicability` when rendering fix diffs. CLI users can't enable
display-only fixes, so this is only a test change for now, but this
should work smoothly if we decide to expose a `--display-only-fixes`
flag or similar in the future.
I also deleted the `PrinterFlags::SHOW_FIX_DIFF` flag. This was
completely unused before, and it seemed less confusing just to delete it
than to enable it in the right place and check it along with the
`OutputFormat` and `preview`.
## Test Plan
I only added one CLI test for now. I'm kind of assuming that we have
decent coverage of the cases where this shouldn't be firing, especially
the `output_format` CLI test, which shows that this definitely doesn't
affect non-preview `full` output. I'm happy to add more tests with
different combinations of options, if we're worried about any in
particular. I did try `--diff` and `--preview` and a few other
combinations manually.
And here's a screenshot using our trusty UP049 example from the design
discussion confirming that all the colors and other formatting still
look as expected:
<img width="786" height="629" alt="image"
src="https://github.com/user-attachments/assets/94e408bc-af7b-4573-b546-a5ceac2620f2"
/>
And one with an unsafe fix to see the footer:
<img width="782" height="367" alt="image"
src="https://github.com/user-attachments/assets/bbb29e47-310b-4293-b2c2-cc7aee3baff4"
/>
## Related issues and PR
- https://github.com/astral-sh/ruff/issues/7352
- https://github.com/astral-sh/ruff/pull/12595
- https://github.com/astral-sh/ruff/issues/12598
- https://github.com/astral-sh/ruff/issues/12599
- https://github.com/astral-sh/ruff/issues/12600
I think we could probably close all of these issues now. I think we've
either resolved or avoided most of them, and if we encounter them again
with the new output format, it would probably make sense to open new
ones anyway.
## Summary
This PR fixes various TODOs around overload call when a variadic
argument is used.
The reason this bug existed is because the specialization wouldn't
account for unpacking the type of the variadic argument.
This is fixed by expanding `MatchedArgument` to contain the type of that
argument _only_ when it is a variadic argument. The reason is that
there's a split for when the argument type is inferred -- the
non-variadic arguments are inferred using `infer_argument_types` _after_
parameter matching while the variadic argument type is inferred _during_
the parameter matching. And, the `MatchedArgument` is populated _during_
parameter matching which means the unpacking would need to happen during
parameter matching.
This split seems a bit inconsistent but I don't want to spend a lot of
time on trying to merge them such that all argument type inference
happens in a single place. I might look into it while adding support for
`**kwargs`.
## Test Plan
Update existing tests by resolving the todos.
The ecosystem changes looks correct to me except for the `slice` call
but it seems that it's unrelated to this PR as we infer `slice[Any, Any,
Any]` for a `slice(1, 2, 3)` call on `main` as well
([playground](https://play.ty.dev/9eacce00-c7d5-4dd5-a932-4265cb2bb4f6)).
This PR adds an implementation of constraint sets.
An individual constraint restricts the specialization of a single
typevar to be within a particular lower and upper bound: the typevar can
only specialize to types that are a supertype of the lower bound, and a
subtype of the upper bound. (Note that lower and upper bounds are fully
static; we take the bottom and top materializations of the bounds to
remove any gradual forms if needed.) Either bound can be “closed” (where
the bound is a valid specialization), or “open” (where it is not).
You can then build up more complex constraint sets using union,
intersection, and negation operations. We use a disjunctive normal form
(DNF) representation, just like we do for types: a _constraint set_ is
the union of zero or more _clauses_, each of which is the intersection
of zero or more individual constraints. Note that the constraint set
that contains no clauses is never satisfiable (`⋃ {} = 0`); and the
constraint set that contains a single clause, which contains no
constraints, is always satisfiable (`⋃ {⋂ {}} = 1`).
One thing to note is that this PR does not change the logic of the
actual assignability checks, and in particular, we still aren't ever
trying to create an "individual constraint" that constrains a typevar.
Technically we're still operating only on `bool`s, since we only ever
instantiate `C::always_satisfiable` (i.e., `true`) and
`C::unsatisfiable` (i.e., `false`) in the `has_relation_to` methods. So
if you thought that #19838 introduced an unnecessarily complex stand-in
for `bool`, well here you go, this one is worse! (But still seemingly
not yielding a performance regression!) The next PR in this series,
#20093, is where we will actually create some non-trivial constraint
sets and use them in anger.
That said, the PR does go ahead and update the assignability checks to
use the new `ConstraintSet` type instead of `bool`. That part is fairly
straightforward since we had already updated the assignability checks to
use the `Constraints` trait; we just have to actively choose a different
impl type. (For the `is_whatever` variants, which still return a `bool`,
we have to convert the constraint set, but the explicit
`is_always_satisfiable` calls serve as nice documentation of our
intent.)
---------
Co-authored-by: Alex Waygood <Alex.Waygood@Gmail.com>
Co-authored-by: Carl Meyer <carl@astral.sh>
This pull request fixes the bug described in issue
[#19153](https://github.com/astral-sh/ruff/issues/19153).
The issue occurred when `PERF403` incorrectly flagged cases involving
tuple unpacking in a for loop. For example:
```python
def f():
v = {}
for (o, p), x in [("op", "x")]:
v[x] = o, p
```
This code was wrongly suggested to be rewritten into a dictionary
comprehension, which changes the semantics.
Changes in this PR:
Updated the `PERF403` rule to correctly handle tuple unpacking in loop
targets.
Added regression tests to ensure this case (and similar ones) are no
longer flagged incorrectly.
Why:
This ensures that `PERF403` only triggers when a dictionary
comprehension is semantically equivalent to the original loop,
preventing false positives.
---------
Co-authored-by: Brent Westbrook <brentrwestbrook@gmail.com>
This is a variant of #20076 that moves some complexity out of
`apply_type_mapping_impl` in `generics.rs`. The tradeoff is that now
every place that applies `TypeMapping::Specialization` must take care to
call `.materialize()` afterwards. (A previous version of this didn't
work because I had missed a spot where I had to call `.materialize()`.)
@carljm as asked in
https://github.com/astral-sh/ruff/pull/20076#discussion_r2305385298 .
## Summary
Adds new rule to catch use of builtins `input()` in async functions.
Issue #8451
## Test Plan
New snapshosts in `ASYNC250.py` with `cargo insta test`.
## Summary
Resolves https://github.com/astral-sh/ty/issues/1103
## Test Plan
Edited `crates/ty_python_semantic/resources/mdtest/literal/boolean.md`
with:
```
# Boolean literals
```python
reveal_type(True) # revealed: Literal[False]
reveal_type(False) # revealed: Literal[False]
```
Ran `cargo test -p ty_python_semantic --test mdtest -- mdtest__literal_boolean`
And we get a test failure:
```
running 1 test
test mdtest__literal_boolean ... FAILED
failures:
---- mdtest__literal_boolean stdout ----
boolean.md - Boolean literals (c336e1af3d538acd)
crates/ty_python_semantic/resources/mdtest/literal/boolean.md:4
unmatched assertion: revealed: Literal[False]
crates/ty_python_semantic/resources/mdtest/literal/boolean.md:4
unexpected error: 13 [revealed-type] "Revealed type: `Literal[True]`"
To rerun this specific test, set the environment variable:
MDTEST_TEST_FILTER='boolean.md - Boolean literals (c336e1af3d538acd)'
MDTEST_TEST_FILTER='boolean.md - Boolean literals (c336e1af3d538acd)'
cargo test -p ty_python_semantic --test mdtest --
mdtest__literal_boolean
--------------------------------------------------
thread 'mdtest__literal_boolean' panicked at
crates/ty_test/src/lib.rs:138:5:
Some tests failed.
note: run with `RUST_BACKTRACE=1` environment variable to display a
backtrace
failures:
mdtest__literal_boolean
test result: FAILED. 0 passed; 1 failed; 0 ignored; 0 measured; 263
filtered out; finished in 0.18s
error: test failed, to rerun pass `-p ty_python_semantic --test mdtest`
```
As expected.
And when i checkout main and keep the same mdtest file all tests pass (as the repro).
## Summary
I spun this off from #19919 to separate the rendering code change and
snapshot updates from the (much smaller) changes to expose this in the
CLI. I grouped all of the `ruff_linter` snapshot changes in the final
commit in an effort to make this easier to review. The code changes are
in [this
range](619395eb41).
I went through all of the snapshots, albeit fairly quickly, and they all
looked correct to me. In the last few commits I was trying to resolve an
existing issue in the alignment of the line number separator:
73720c73be/crates/ruff_linter/src/rules/flake8_comprehensions/snapshots/ruff_linter__rules__flake8_comprehensions__tests__C409_C409.py.snap (L87-L89)
In the snapshot above on `main`, you can see that a double-digit line
number at the end of the context lines for a snippet was causing a
misalignment with the other separators. That's now resolved. The one
downside is that this can lead to a mismatch with the diagnostic above:
```
C409 [*] Unnecessary list literal passed to `tuple()` (rewrite as a tuple literal)
--> C409.py:4:6
|
2 | t2 = tuple([1, 2])
3 | t3 = tuple((1, 2))
4 | t4 = tuple([
| ______^
5 | | 1,
6 | | 2
7 | | ])
| |__^
8 | t5 = tuple(
9 | (1, 2)
|
help: Rewrite as a tuple literal
1 | t1 = tuple([])
2 | t2 = tuple([1, 2])
3 | t3 = tuple((1, 2))
- t4 = tuple([
4 + t4 = (
5 | 1,
6 | 2
- ])
7 + )
8 | t5 = tuple(
9 | (1, 2)
10 | )
note: This is an unsafe fix and may remove comments or change runtime behavior
```
But I don't think we can avoid that without really reworking this
rendering to make the diagnostic and diff rendering aware of each other.
Anyway, this should only happen in relatively rare cases where the
diagnostic is near a digit boundary and also near a context boundary.
Most of our diagnostics line up nicely.
Another potential downside of the new rendering format is its handling
of long stretches of `+` or `-` lines:
```
help: Replace with `Literal[...] | None`
21 | ...
22 |
23 |
- def func6(arg1: Literal[
- "hello",
- None # Comment 1
- , "world"
- ]):
24 + def func6(arg1: Literal["hello", "world"] | None):
25 | ...
26 |
27 |
note: This is an unsafe fix and may remove comments or change runtime behavior
```
To me it just seems a little hard to tell what's going on with just a
long streak of `-`-prefixed lines. I saw an even more exaggerated
example at some point, but I think this is also fairly rare. Most of the
snapshots seem more like the examples we looked at on Discord with
plenty of `|` lines and pairs of `+` and `-` lines.
## Test Plan
Existing tests plus one new test in `ruff_db` to isolate a line
separator alignment issue
## Summary
Decrease the maximum number of literals in a union before we collapse to
the supertype. The better fix for this will be
https://github.com/astral-sh/ty/issues/957, but it is very tempting to
solve this for now by simply decreasing the limit by one, to get below
the salsa limit of 200.
closes https://github.com/astral-sh/ty/issues/660
## Test Plan
Added a regression test that would previously lead to a "too many cycle
iterations" panic.
## Summary
With this PR, we stop performing boundness analysis for implicit
instance attributes:
```py
class C:
def __init__(self):
if False:
self.x = 1
C().x # would previously show an error, with this PR we pretend the attribute exists
```
This PR is potentially just a temporary measure until we find a better
fix. But I have already invested a lot of time trying to find the root
cause of https://github.com/astral-sh/ty/issues/758 (and [this
example](https://github.com/astral-sh/ty/issues/758#issuecomment-3206108262),
which I'm not entirely sure is related) and I still don't understand
what is going on. This PR fixes the performance problems in both of
these problems (in a rather crude way).
The impact of the proposed change on the ecosystem is small, and the
three new diagnostics are arguably true positives (previously hidden
because we considered the code unreachable, based on e.g. `assert`ions
that depended on implicit instance attributes). So this seems like a
reasonable fix for now.
Note that we still support cases like these:
```py
class D:
if False: # or any other expression that statically evaluates to `False`
x: int = 1
D().x # still an error
class E:
if False: # or any other expression that statically evaluates to `False`
def f(self):
self.x = 1
E().x # still an error
```
closes https://github.com/astral-sh/ty/issues/758
## Test Plan
Updated tests, benchmark results
<!--
Thank you for contributing to Ruff/ty! To help us out with reviewing,
please consider the following:
- Does this pull request include a summary of the change? (See below.)
- Does this pull request include a descriptive title? (Please prefix
with `[ty]` for ty pull
requests.)
- Does this pull request include references to any relevant issues?
-->
## Summary
<!-- What's the purpose of the change? What does it do, and why? -->
Fixes#19664
Fix allowed unused imports matching for top-level modules.
I've simply replaced `from_dotted_name` with `user_defined`. Since
QualifiedName for imports is created in
crates/ruff_python_semantic/src/imports.rs, I guess it's acceptable to
use `user_defined` here. Please tell me if there is better way.
0c5089ed9e/crates/ruff_python_semantic/src/imports.rs (L62)
## Test Plan
<!-- How was it tested? -->
I've added a snapshot test
`f401_allowed_unused_imports_top_level_module`.
## Summary
This PR is a first step toward adding a GitLab output format to ty. It
converts the `GitlabEmitter` from `ruff_linter` to a `GitlabRenderer` in
`ruff_db` and updates its implementation to handle non-Ruff files and
diagnostics without primary spans. I tried to break up the changes here
so that they're easy to review commit-by-commit, or at least in groups
of commits:
- [preparatory changes in-place in `ruff_linter` and a `ruff_db`
skeleton](0761b73a61)
- [moving the code over with no implementation changes mixed
in](0761b73a61..8f909ea0bb)
- [tidying up the code now in
`ruff_db`](9f047c4f9f..e5e217fcd6)
This wasn't strictly necessary, but I also added some `Serialize`
structs instead of calling `json!` to make it a little clearer that we
weren't modifying the schema (e4c4bee35d).
I plan to follow this up with a separate PR exposing this output format
in the ty CLI, which should be quite straightforward.
## Test Plan
Existing tests, especially the two that show up in the diff as renamed
nearly without changes
## Summary
closes https://github.com/astral-sh/ty/issues/692
If the expression (or any child expressions) is not definitely bound the
reachability constraint evaluation is determined as ambiguous.
This fixes the infinite cycles panic in the following code:
```py
from typing import Literal
class Toggle:
def __init__(self: "Toggle"):
if not self.x:
self.x: Literal[True] = True
```
Credit of this solution is for David.
## Test Plan
- Added a test case with too many cycle iterations panic.
- Previous tests.
---------
Co-authored-by: David Peter <mail@david-peter.de>
Part of #994. This adds a new field to the Specialization struct to
record when we're dealing with the top or bottom materialization of an
invariant generic. It also implements subtyping and assignability for
these objects.
Next planned steps after this is done are to implement other operations
on top/bottom materializations; probably attribute access is an
important one.
---------
Co-authored-by: Carl Meyer <carl@astral.sh>
## Summary
Adds new rule to find and report use of `httpx.Client` in synchronous
functions.
See issue #8451
## Test Plan
New snapshots for `ASYNC212.py` with `cargo insta test`.
There are some situations that we have a confusing diagnostics due to
identical class names.
## Class with same name from different modules
```python
import pandas
import polars
df: pandas.DataFrame = polars.DataFrame()
```
This yields the following error:
**Actual:**
error: [invalid-assignment] "Object of type `DataFrame` is not
assignable to `DataFrame`"
**Expected**:
error: [invalid-assignment] "Object of type `polars.DataFrame` is not
assignable to `pandas.DataFrame`"
## Nested classes
```python
from enum import Enum
class A:
class B(Enum):
ACTIVE = "active"
INACTIVE = "inactive"
class C:
class B(Enum):
ACTIVE = "active"
INACTIVE = "inactive"
```
**Actual**:
error: [invalid-assignment] "Object of type `Literal[B.ACTIVE]` is not
assignable to `B`"
**Expected**:
error: [invalid-assignment] "Object of type
`Literal[my_module.C.B.ACTIVE]` is not assignable to `my_module.A.B`"
## Solution
In this MR we added an heuristics to detect when to use a fully
qualified name:
- There is an invalid assignment and;
- They are two different classes and;
- They have the same name
The fully qualified name always includes:
- module name
- nested classes name
- actual class name
There was no `QualifiedDisplay` so I had to implement it from scratch.
I'm very new to the codebase, so I might have done things inefficiently,
so I appreciate feedback.
Should we pre-compute the fully qualified name or do it on demand?
## Not implemented
### Function-local classes
Should we approach this in a different PR?
**Example**:
```python
# t.py
from __future__ import annotations
def function() -> A:
class A:
pass
return A()
class A:
pass
a: A = function()
```
#### mypy
```console
t.py:8: error: Incompatible return value type (got "t.A@5", expected "t.A") [return-value]
```
From my testing the 5 in `A@5` comes from the like number.
#### ty
```console
error[invalid-return-type]: Return type does not match returned value
--> t.py:4:19
|
4 | def function() -> A:
| - Expected `A` because of return type
5 | class A:
6 | pass
7 |
8 | return A()
| ^^^ expected `A`, found `A`
|
info: rule `invalid-return-type` is enabled by default
```
Fixes https://github.com/astral-sh/ty/issues/848
---------
Co-authored-by: Alex Waygood <Alex.Waygood@Gmail.com>
Co-authored-by: Carl Meyer <carl@astral.sh>
## Summary
Fixes#19581
I decided to add in a `indent_first_line` function into
[`textwrap.rs`](https://github.com/astral-sh/ruff/blob/main/crates/ruff_python_trivia/src/textwrap.rs),
as it solely focuses on text manipulation utilities. It follows the same
design as `indent()`, and there may be situations in the future where it
can be reused as well.
---------
Co-authored-by: Brent Westbrook <36778786+ntBre@users.noreply.github.com>
Co-authored-by: Brent Westbrook <brentrwestbrook@gmail.com>
## Summary
While looking at some logging output that I added to
`ReachabilityConstraintBuilder::add_and_constraint` in order to debug
https://github.com/astral-sh/ty/issues/1091, I noticed that it seemed to
suggest that the TDD was built in an imbalanced way for code like the
following, where we have a sequence of non-nested `if` conditions:
```py
def f(t1, t2, t3, t4, …):
x = 0
if t1:
x = 1
if t2:
x = 2
if t3:
x = 3
if t4:
x = 4
…
```
To understand this a bit better, I added some code to the
`ReachabilityConstraintBuilder` to render the resulting TDD. On `main`,
we get a tree that looks like the following, where you can see a pattern
of N sub-trees that grow linearly with N (number of `if` statements).
This results in an overall tree structure that has N² nodes (see graph
below):
<img alt="normal order"
src="https://github.com/user-attachments/assets/aab40ce9-e82a-4fcd-823a-811f05f15f66"
/>
If we zoom in to one of these subgraphs, we can see what the problem is.
When we add new constraints that represent combinations like `t1 AND ~t2
AND ~t3 AND t4 AND …`, they start with the evaluation of "early"
conditions (`t1`, `t2`, …). This means that we have to create new
subgraphs for each new `if` condition because there is little sharing
with the previous structure. We evaluate the Boolean condition in a
right-associative way: `t1 AND (~t2 AND (~t3 AND t4)))`:
<img width="500" align="center"
src="https://github.com/user-attachments/assets/31ea7182-9e00-4975-83df-d980464f545d"
/>
If we change the ordering of TDD atoms, we can change that to a
left-associative evaluation: `(((t1 AND ~t2) AND ~t3) AND t4) …`. This
means that we can re-use previous subgraphs `(t1 AND ~t2)`, which
results in a much more compact graph structure overall (note how "late"
conditions are now at the top, and "early" conditions are further down
in the graph):
<img alt="reverse order"
src="https://github.com/user-attachments/assets/96a6b7c1-3d35-4192-a917-0b2d24c6b144"
/>
If we count the number of TDD nodes for a growing number if `if`
statements, we can see that this change results in a slower growth. It's
worth noting that the growth is still superlinear, though:
<img width="800" height="600" alt="plot"
src="https://github.com/user-attachments/assets/22e8394f-e74e-4a9e-9687-0d41f94f2303"
/>
On the actual code from the referenced ticket (the `t_main.py` file
reduced to its main function, with the main function limited to 2000
lines instead of 11000 to allow the version on `main` to run to
completion), the effect is much more dramatic. Instead of 26 million TDD
nodes (`main`), we now only create 250 thousand (this branch), which is
slightly less than 1%.
The change in this PR allows us to build the semantic index and
type-check the problematic `t_main.py` file in
https://github.com/astral-sh/ty/issues/1091 in 9 seconds. This is still
not great, but an obvious improvement compared to running out of memory
after *minutes* of execution.
An open question remains whether this change is beneficial for all kinds
of code patterns, or just this linear sequence of `if` statements. It
does not seem unreasonable to think that referring to "earlier"
conditions is generally a good idea, but I learned from Doug that it's
generally not possible to find a TDD-construction heuristic that is
non-pathological for all kinds of inputs. Fortunately, it seems like
this change here results in performance improvements across *all of our
benchmarks*, which should increase the confidence in this change:
| Benchmark | Improvement |
|---------------------|-------------------------|
| hydra-zen | +13% |
| DateType | +5% |
| sympy (walltime) | +4% |
| attrs | +4% |
| pydantic (walltime) | +2% |
| pandas (walltime) | +2% |
| altair (walltime) | +2% |
| static-frame | +2% |
| anyio | +1% |
| freqtrade | +1% |
| colour-science | +1% |
| tanjun | +1% |
closes https://github.com/astral-sh/ty/issues/1091
---------
Co-authored-by: Douglas Creager <dcreager@dcreager.net>
<!--
Thank you for contributing to Ruff/ty! To help us out with reviewing,
please consider the following:
- Does this pull request include a summary of the change? (See below.)
- Does this pull request include a descriptive title? (Please prefix
with `[ty]` for ty pull
requests.)
- Does this pull request include references to any relevant issues?
-->
## Summary
<!-- What's the purpose of the change? What does it do, and why? -->
Extend the following rules.
### AIR311
* `airflow.sensors.base.BaseSensorOperator` →
airflow.sdk.bases.sensor.BaseSensorOperator`
* `airflow.sensors.base.PokeReturnValue` →
airflow.sdk.bases.sensor.PokeReturnValue`
* `airflow.sensors.base.poke_mode_only` →
airflow.sdk.bases.sensor.poke_mode_only`
* `airflow.decorators.base.DecoratedOperator` →
airflow.sdk.bases.decorator.DecoratedOperator`
* `airflow.models.param.Param` → airflow.sdk.definitions.param.Param`
* `airflow.decorators.base.DecoratedMappedOperator` →
`airflow.sdk.bases.decorator.DecoratedMappedOperator`
* `airflow.decorators.base.DecoratedOperator` →
`airflow.sdk.bases.decorator.DecoratedOperator`
* `airflow.decorators.base.TaskDecorator` →
`airflow.sdk.bases.decorator.TaskDecorator`
* `airflow.decorators.base.get_unique_task_id` →
`airflow.sdk.bases.decorator.get_unique_task_id`
* `airflow.decorators.base.task_decorator_factory` →
`airflow.sdk.bases.decorator.task_decorator_factory`
### AIR312
* `airflow.sensors.bash.BashSensor` →
`airflow.providers.standard.sensor.bash.BashSensor`
* `airflow.sensors.python.PythonSensor` →
`airflow.providers.standard.sensors.python.PythonSensor`
## Test Plan
<!-- How was it tested? -->
update the test fixture accordingly in the second commit and reorg in
the third
## Summary
Properly preserve type qualifiers when accessing attributes on unions
and intersections. This is a prerequisite for
https://github.com/astral-sh/ruff/pull/19579.
Also fix a completely wrong implementation of
`map_with_boundness_and_qualifiers`. It now closely follows
`map_with_boundness` (just above).
## Test Plan
I thought about it, but didn't find any easy way to test this. This only
affected `Type::member`. Things like validation of attribute writes
(where type qualifiers like `ClassVar` and `Final` are important) were
already handling things correctly.
## Summary
Add a subtly different test case for recursive PEP 695 type aliases,
which does require that we relax our union simplification, so we don't
eagerly unpack aliases from user-provided union annotations.
## Test Plan
Added mdtest.
