## Summary
Garbage collect ASTs once we are done checking a given file. Queries
with a cross-file dependency on the AST will reparse the file on demand.
This reduces ty's peak memory usage by ~20-30%.
The primary change of this PR is adding a `node_index` field to every
AST node, that is assigned by the parser. `ParsedModule` can use this to
create a flat index of AST nodes any time the file is parsed (or
reparsed). This allows `AstNodeRef` to simply index into the current
instance of the `ParsedModule`, instead of storing a pointer directly.
The indices are somewhat hackily (using an atomic integer) assigned by
the `parsed_module` query instead of by the parser directly. Assigning
the indices in source-order in the (recursive) parser turns out to be
difficult, and collecting the nodes during semantic indexing is
impossible as `SemanticIndex` does not hold onto a specific
`ParsedModuleRef`, which the pointers in the flat AST are tied to. This
means that we have to do an extra AST traversal to assign and collect
the nodes into a flat index, but the small performance impact (~3% on
cold runs) seems worth it for the memory savings.
Part of https://github.com/astral-sh/ty/issues/214.
This PR implements template strings (t-strings) in the parser and
formatter for Ruff.
Minimal changes necessary to compile were made in other parts of the code (e.g. ty, the linter, etc.). These will be covered properly in follow-up PRs.
<!--
Thank you for contributing to Ruff! To help us out with reviewing,
please consider the following:
- Does this pull request include a summary of the change? (See below.)
- Does this pull request include a descriptive title?
- Does this pull request include references to any relevant issues?
-->
## Summary
I decided to disable the new
[`needless_continue`](https://rust-lang.github.io/rust-clippy/master/index.html#needless_continue)
rule because I often found the explicit `continue` more readable over an
empty block or having to invert the condition of an other branch.
## Test Plan
`cargo test`
---------
Co-authored-by: Alex Waygood <Alex.Waygood@Gmail.com>
## Summary
This is part of the preparation for detecting syntax errors in the
parser from https://github.com/astral-sh/ruff/pull/16090/. As suggested
in [this
comment](https://github.com/astral-sh/ruff/pull/16090/#discussion_r1953084509),
I started working on a `ParseOptions` struct that could be stored in the
parser. For this initial refactor, I only made it hold the existing
`Mode` option, but for syntax errors, we will also need it to have a
`PythonVersion`. For that use case, I'm picturing something like a
`ParseOptions::with_python_version` method, so you can extend the
current calls to something like
```rust
ParseOptions::from(mode).with_python_version(settings.target_version)
```
But I thought it was worth adding `ParseOptions` alone without changing
any other behavior first.
Most of the diff is just updating call sites taking `Mode` to take
`ParseOptions::from(Mode)` or those taking `PySourceType`s to take
`ParseOptions::from(PySourceType)`. The interesting changes are in the
new `parser/options.rs` file and smaller parts of `parser/mod.rs` and
`ruff_python_parser/src/lib.rs`.
## Test Plan
Existing tests, this should not change any behavior.
## Summary
This is a follow-up to #15726, #15778, and #15794 to preserve the triple
quote and prefix flags in plain strings, bytestrings, and f-strings.
I also added a `StringLiteralFlags::without_triple_quotes` method to
avoid passing along triple quotes in rules like SIM905 where it might
not make sense, as discussed
[here](https://github.com/astral-sh/ruff/pull/15726#discussion_r1930532426).
## Test Plan
Existing tests, plus many new cases in the `generator::tests::quote`
test that should cover all combinations of quotes and prefixes, at least
for simple string bodies.
Closes#7799 when combined with #15694, #15726, #15778, and #15794.
---------
Co-authored-by: Alex Waygood <Alex.Waygood@Gmail.com>
## Summary
This is another follow-up to #15726 and #15778, extending the
quote-preserving behavior to f-strings and deleting the now-unused
`Generator::quote` field.
## Details
I also made one unrelated change to `rules/flynt/helpers.rs` to remove a
`to_string` call for making a `Box<str>` and tweaked some arguments to
some of the `Generator::unparse_f_string` methods to make the code
easier to follow, in my opinion. Happy to revert especially the latter
of these if needed.
Unfortunately this still does not fix the issue in #9660, which appears
to be more of an escaping issue than a quote-preservation issue. After
#15726, the result is now `a = f'# {"".join([])}' if 1 else ""` instead
of `a = f"# {''.join([])}" if 1 else ""` (single quotes on the outside
now), but we still don't have the desired behavior of double quotes
everywhere on Python 3.12+. I added a test for this but split it off
into another branch since it ended up being unaddressed here, but my
`dbg!` statements showed the correct preferred quotes going into
[`UnicodeEscape::with_preferred_quote`](https://github.com/astral-sh/ruff/blob/main/crates/ruff_python_literal/src/escape.rs#L54).
## Test Plan
Existing rule and `Generator` tests.
---------
Co-authored-by: Alex Waygood <Alex.Waygood@Gmail.com>
## Summary
This is a very closely related follow-up to #15726, adding the same
quote-preserving behavior to bytestrings. Only one rule (UP018) was
affected this time, and it was easy to mirror the plain string changes.
## Test Plan
Existing tests
## Summary
This is a first step toward fixing #7799 by using the quoting style
stored in the `flags` field on `ast::StringLiteral`s to select a quoting
style. This PR does not include support for f-strings or byte strings.
Several rules also needed small updates to pass along existing quoting
styles instead of using `StringLiteralFlags::default()`. The remaining
snapshot changes are intentional and should preserve the quotes from the
input strings.
## Test Plan
Existing tests with some accepted updates, plus a few new RUF055 tests
for raw strings.
---------
Co-authored-by: Alex Waygood <alex.waygood@gmail.com>
## Summary
Fixes#9663 and also improves the fixes for
[RUF055](https://docs.astral.sh/ruff/rules/unnecessary-regular-expression/)
since regular expressions are often written as raw strings.
This doesn't include raw f-strings.
## Test Plan
Existing snapshots for RUF055 and PT009, plus a new `Generator` test and
a regression test for the reported `PIE810` issue.
Remove unnecessary uses of `.as_ref()`, `.iter()`, `&**` and similar, mostly in situations when iterating over variables. Many of these changes are only possible following #13826, when we bumped our MSRV to 1.80: several useful implementations on `&Box<[T]>` were only stabilised in Rust 1.80. Some of these changes we could have done earlier, however.
## Summary
This PR updates the linter, specifically the token-based rules, to work
on the tokens that come after a syntax error.
For context, the token-based rules only diagnose the tokens up to the
first lexical error. This PR builds up an error resilience by
introducing a `TokenIterWithContext` which updates the `nesting` level
and tries to reflect it with what the lexer is seeing. This isn't 100%
accurate because if the parser recovered from an unclosed parenthesis in
the middle of the line, the context won't reduce the nesting level until
it sees the newline token at the end of the line.
resolves: #11915
## Test Plan
* Add test cases for a bunch of rules that are affected by this change.
* Run the fuzzer for a long time, making sure to fix any other bugs.
## Summary
This PR avoids the `depth` counter when detecting indentation from
non-logical lines because it seems to never be used. It might have been
a leftover when the logic was added originally in #11608.
## Test Plan
`cargo insta test`
## Summary
This PR fixes a bug where the `Generator` wouldn't add a newline before
a type alias statement. This is because it wasn't using the `statement`
macro which takes care of the newline.
Without this fix, a code like:
```py
type X = int
type Y = str
```
The generator would produce:
```py
type X = inttype Y = str
```
## Test Plan
Add a test case.
## Summary
This PR updates the entire parser stack in multiple ways:
### Make the lexer lazy
* https://github.com/astral-sh/ruff/pull/11244
* https://github.com/astral-sh/ruff/pull/11473
Previously, Ruff's lexer would act as an iterator. The parser would
collect all the tokens in a vector first and then process the tokens to
create the syntax tree.
The first task in this project is to update the entire parsing flow to
make the lexer lazy. This includes the `Lexer`, `TokenSource`, and
`Parser`. For context, the `TokenSource` is a wrapper around the `Lexer`
to filter out the trivia tokens[^1]. Now, the parser will ask the token
source to get the next token and only then the lexer will continue and
emit the token. This means that the lexer needs to be aware of the
"current" token. When the `next_token` is called, the current token will
be updated with the newly lexed token.
The main motivation to make the lexer lazy is to allow re-lexing a token
in a different context. This is going to be really useful to make the
parser error resilience. For example, currently the emitted tokens
remains the same even if the parser can recover from an unclosed
parenthesis. This is important because the lexer emits a
`NonLogicalNewline` in parenthesized context while a normal `Newline` in
non-parenthesized context. This different kinds of newline is also used
to emit the indentation tokens which is important for the parser as it's
used to determine the start and end of a block.
Additionally, this allows us to implement the following functionalities:
1. Checkpoint - rewind infrastructure: The idea here is to create a
checkpoint and continue lexing. At a later point, this checkpoint can be
used to rewind the lexer back to the provided checkpoint.
2. Remove the `SoftKeywordTransformer` and instead use lookahead or
speculative parsing to determine whether a soft keyword is a keyword or
an identifier
3. Remove the `Tok` enum. The `Tok` enum represents the tokens emitted
by the lexer but it contains owned data which makes it expensive to
clone. The new `TokenKind` enum just represents the type of token which
is very cheap.
This brings up a question as to how will the parser get the owned value
which was stored on `Tok`. This will be solved by introducing a new
`TokenValue` enum which only contains a subset of token kinds which has
the owned value. This is stored on the lexer and is requested by the
parser when it wants to process the data. For example:
8196720f80/crates/ruff_python_parser/src/parser/expression.rs (L1260-L1262)
[^1]: Trivia tokens are `NonLogicalNewline` and `Comment`
### Remove `SoftKeywordTransformer`
* https://github.com/astral-sh/ruff/pull/11441
* https://github.com/astral-sh/ruff/pull/11459
* https://github.com/astral-sh/ruff/pull/11442
* https://github.com/astral-sh/ruff/pull/11443
* https://github.com/astral-sh/ruff/pull/11474
For context,
https://github.com/RustPython/RustPython/pull/4519/files#diff-5de40045e78e794aa5ab0b8aacf531aa477daf826d31ca129467703855408220
added support for soft keywords in the parser which uses infinite
lookahead to classify a soft keyword as a keyword or an identifier. This
is a brilliant idea as it basically wraps the existing Lexer and works
on top of it which means that the logic for lexing and re-lexing a soft
keyword remains separate. The change here is to remove
`SoftKeywordTransformer` and let the parser determine this based on
context, lookahead and speculative parsing.
* **Context:** The transformer needs to know the position of the lexer
between it being at a statement position or a simple statement position.
This is because a `match` token starts a compound statement while a
`type` token starts a simple statement. **The parser already knows
this.**
* **Lookahead:** Now that the parser knows the context it can perform
lookahead of up to two tokens to classify the soft keyword. The logic
for this is mentioned in the PR implementing it for `type` and `match
soft keyword.
* **Speculative parsing:** This is where the checkpoint - rewind
infrastructure helps. For `match` soft keyword, there are certain cases
for which we can't classify based on lookahead. The idea here is to
create a checkpoint and keep parsing. Based on whether the parsing was
successful and what tokens are ahead we can classify the remaining
cases. Refer to #11443 for more details.
If the soft keyword is being parsed in an identifier context, it'll be
converted to an identifier and the emitted token will be updated as
well. Refer
8196720f80/crates/ruff_python_parser/src/parser/expression.rs (L487-L491).
The `case` soft keyword doesn't require any special handling because
it'll be a keyword only in the context of a match statement.
### Update the parser API
* https://github.com/astral-sh/ruff/pull/11494
* https://github.com/astral-sh/ruff/pull/11505
Now that the lexer is in sync with the parser, and the parser helps to
determine whether a soft keyword is a keyword or an identifier, the
lexer cannot be used on its own. The reason being that it's not
sensitive to the context (which is correct). This means that the parser
API needs to be updated to not allow any access to the lexer.
Previously, there were multiple ways to parse the source code:
1. Passing the source code itself
2. Or, passing the tokens
Now that the lexer and parser are working together, the API
corresponding to (2) cannot exists. The final API is mentioned in this
PR description: https://github.com/astral-sh/ruff/pull/11494.
### Refactor the downstream tools (linter and formatter)
* https://github.com/astral-sh/ruff/pull/11511
* https://github.com/astral-sh/ruff/pull/11515
* https://github.com/astral-sh/ruff/pull/11529
* https://github.com/astral-sh/ruff/pull/11562
* https://github.com/astral-sh/ruff/pull/11592
And, the final set of changes involves updating all references of the
lexer and `Tok` enum. This was done in two-parts:
1. Update all the references in a way that doesn't require any changes
from this PR i.e., it can be done independently
* https://github.com/astral-sh/ruff/pull/11402
* https://github.com/astral-sh/ruff/pull/11406
* https://github.com/astral-sh/ruff/pull/11418
* https://github.com/astral-sh/ruff/pull/11419
* https://github.com/astral-sh/ruff/pull/11420
* https://github.com/astral-sh/ruff/pull/11424
2. Update all the remaining references to use the changes made in this
PR
For (2), there were various strategies used:
1. Introduce a new `Tokens` struct which wraps the token vector and add
methods to query a certain subset of tokens. These includes:
1. `up_to_first_unknown` which replaces the `tokenize` function
2. `in_range` and `after` which replaces the `lex_starts_at` function
where the former returns the tokens within the given range while the
latter returns all the tokens after the given offset
2. Introduce a new `TokenFlags` which is a set of flags to query certain
information from a token. Currently, this information is only limited to
any string type token but can be expanded to include other information
in the future as needed. https://github.com/astral-sh/ruff/pull/11578
3. Move the `CommentRanges` to the parsed output because this
information is common to both the linter and the formatter. This removes
the need for `tokens_and_ranges` function.
## Test Plan
- [x] Update and verify the test snapshots
- [x] Make sure the entire test suite is passing
- [x] Make sure there are no changes in the ecosystem checks
- [x] Run the fuzzer on the parser
- [x] Run this change on dozens of open-source projects
### Running this change on dozens of open-source projects
Refer to the PR description to get the list of open source projects used
for testing.
Now, the following tests were done between `main` and this branch:
1. Compare the output of `--select=E999` (syntax errors)
2. Compare the output of default rule selection
3. Compare the output of `--select=ALL`
**Conclusion: all output were same**
## What's next?
The next step is to introduce re-lexing logic and update the parser to
feed the recovery information to the lexer so that it can emit the
correct token. This moves us one step closer to having error resilience
in the parser and provides Ruff the possibility to lint even if the
source code contains syntax errors.
## Summary
In an `__init__.py` file, it's not uncommon to lack a logical indent
(since it may just contain imports). In such cases, we were always
falling back to four-space indent. This PR adds detection for indents
within import groups.
Closes https://github.com/astral-sh/ruff/issues/11606.
## Summary
This PR renames `AnyStringKind` to `AnyStringFlags` and `AnyStringFlags`
to `AnyStringFlagsInner`.
The main motivation is to have consistent usage of "kind" and "flags".
For each string kind, it's "flags" like `StringLiteralFlags`,
`BytesLiteralFlags`, and `FStringFlags` but it was `AnyStringKind` for
the "any" variant.
This PR modifies our AST so that nodes for string literals, bytes literals and f-strings all retain the following information:
- The quoting style used (double or single quotes)
- Whether the string is triple-quoted or not
- Whether the string is raw or not
This PR is a followup to #10256. Like with that PR, this PR does not, in itself, fix any bugs. However, it means that we will have the necessary information to preserve quoting style and rawness of strings in the `ExprGenerator` in a followup PR, which will allow us to provide a fix for https://github.com/astral-sh/ruff/issues/7799.
The information is recorded on the AST nodes using a bitflag field on each node, similarly to how we recorded the information on `Tok::String`, `Tok::FStringStart` and `Tok::FStringMiddle` tokens in #10298. Rather than reusing the bitflag I used for the tokens, however, I decided to create a custom bitflag for each AST node.
Using different bitflags for each node allows us to make invalid states unrepresentable: it is valid to set a `u` prefix on a string literal, but not on a bytes literal or an f-string. It also allows us to have better debug representations for each AST node modified in this PR.
## Summary
This PR changes the `E3*` rules to respect the `isort`
`lines-after-imports` and `lines-between-types` settings. Specifically,
the following rules required changing
* `TooManyBlannkLines` : Respects both settings.
* `BlankLinesTopLevel`: Respects `lines-after-imports`. Doesn't need to
respect `lines-between-types` because it only applies to classes and
functions
The downside of this approach is that `isort` and the blank line rules
emit a diagnostic when there are too many blank lines. The fixes aren't
identical, the blank line is less opinionated, but blank lines accepts
the fix of `isort`.
<details>
<summary>Outdated approach</summary>
Fixes
https://github.com/astral-sh/ruff/issues/10077#issuecomment-1961266981
This PR changes the blank line rules to not enforce the number of blank
lines after imports (top-level) if isort is enabled and leave it to
isort to enforce the right number of lines (depends on the
`isort.lines-after-imports` and `isort.lines-between-types` settings).
The reason to give `isort` precedence over the blank line rules is that
they are configurable. Users that always want to blank lines after
imports can use `isort.lines-after-imports=2` to enforce that
(specifically for imports).
This PR does not fix the incompatibility with the formatter in pyi files
that only uses 0 to 1 blank lines. I'll address this separately.
</details>
## Review
The first commit is a small refactor that simplified implementing the
fix (and makes it easier to reason about what's mutable and what's not).
## Test Plan
I added a new test and verified that it fails with an error that the fix
never converges. I verified the snapshot output after implementing the
fix.
---------
Co-authored-by: Hoël Bagard <34478245+hoel-bagard@users.noreply.github.com>
The expression types in our AST are called `ExprYield`, `ExprAwait`,
`ExprStringLiteral` etc, except `ExprNamedExpr`, `ExprIfExpr` and
`ExprGenratorExpr`. This seems to align with [Python AST's
naming](https://docs.python.org/3/library/ast.html) but feels
inconsistent and excessive.
This PR removes the `Expr` postfix from `ExprNamedExpr`, `ExprIfExpr`,
and `ExprGeneratorExpr`.
## Summary
This PR fixes the `DebugText` implementation to use the expression range
instead of the parenthesized range.
Taking the following code snippet as an example:
```python
x = 1
print(f"{ ( x ) = }")
```
The output of running it would be:
```
( x ) = 1
```
Notice that the whitespace between the parentheses and the expression is
preserved as is.
Currently, we don't preserve this information in the AST which defeats
the purpose of `DebugText` as the main purpose of the struct is to
preserve whitespaces _around_ the expression.
This is also problematic when generating the code from the AST node as
then the generator has no information about the parentheses the
whitespaces between them and the expression which would lead to the
removal of the parentheses in the generated code.
I noticed this while working on the f-string formatting where the debug
text would be used to preserve the text surrounding the expression in
the presence of debug expression. The parentheses were being dropped
then which made me realize that the problem is instead in the parser.
## Test Plan
1. Add a test case for the parser
2. Add a test case for the generator
## Summary
This PR reduces the size of `Expr` from 80 to 64 bytes, by reducing the
sizes of...
- `ExprCall` from 72 to 56 bytes, by using boxed slices for `Arguments`.
- `ExprCompare` from 64 to 48 bytes, by using boxed slices for its
various vectors.
In testing, the parser gets a bit faster, and the linter benchmarks
improve quite a bit.
## Summary
I always found it odd that we had to pass this in, since it's really
higher-level context for the error. The awkwardness is further evidenced
by the fact that we pass in fake values everywhere (even outside of
tests). The source path isn't actually used to display the error; it's
only accessed elsewhere to _re-display_ the error in certain cases. This
PR modifies to instead pass the path directly in those cases.
This PR adds a `as_slice` method to all the string nodes which returns
all the parts of the nodes as a slice. This will be useful in the next
PR to split the string formatting to use this method to extract the
_single node_ or _implicitly concanated nodes_.
Rebase of #6365 authored by @davidszotten.
## Summary
This PR updates the AST structure for an f-string elements.
The main **motivation** behind this change is to have a dedicated node
for the string part of an f-string. Previously, the existing
`ExprStringLiteral` node was used for this purpose which isn't exactly
correct. The `ExprStringLiteral` node should include the quotes as well
in the range but the f-string literal element doesn't include the quote
as it's a specific part within an f-string. For example,
```python
f"foo {x}"
# ^^^^
# This is the literal part of an f-string
```
The introduction of `FStringElement` enum is helpful which represent
either the literal part or the expression part of an f-string.
### Rule Updates
This means that there'll be two nodes representing a string depending on
the context. One for a normal string literal while the other is a string
literal within an f-string. The AST checker is updated to accommodate
this change. The rules which work on string literal are updated to check
on the literal part of f-string as well.
#### Notes
1. The `Expr::is_literal_expr` method would check for
`ExprStringLiteral` and return true if so. But now that we don't
represent the literal part of an f-string using that node, this improves
the method's behavior and confines to the actual expression. We do have
the `FStringElement::is_literal` method.
2. We avoid checking if we're in a f-string context before adding to
`string_type_definitions` because the f-string literal is now a
dedicated node and not part of `Expr`.
3. Annotations cannot use f-string so we avoid changing any rules which
work on annotation and checks for `ExprStringLiteral`.
## Test Plan
- All references of `Expr::StringLiteral` were checked to see if any of
the rules require updating to account for the f-string literal element
node.
- New test cases are added for rules which check against the literal
part of an f-string.
- Check the ecosystem results and ensure it remains unchanged.
## Performance
There's a performance penalty in the parser. The reason for this remains
unknown as it seems that the generated assembly code is now different
for the `__reduce154` function. The reduce function body is just popping
the `ParenthesizedExpr` on top of the stack and pushing it with the new
location.
- The size of `FStringElement` enum is the same as `Expr` which is what
it replaces in `FString::format_spec`
- The size of `FStringExpressionElement` is the same as
`ExprFormattedValue` which is what it replaces
I tried reducing the `Expr` enum from 80 bytes to 72 bytes but it hardly
resulted in any performance gain. The difference can be seen here:
- Original profile: https://share.firefox.dev/3Taa7ES
- Profile after boxing some node fields:
https://share.firefox.dev/3GsNXpD
### Backtracking
I tried backtracking the changes to see if any of the isolated change
produced this regression. The problem here is that the overall change is
so small that there's only a single checkpoint where I can backtrack and
that checkpoint results in the same regression. This checkpoint is to
revert using `Expr` to the `FString::format_spec` field. After this
point, the change would revert back to the original implementation.
## Review process
The review process is similar to #7927. The first set of commits update
the node structure, parser, and related AST files. Then, further commits
update the linter and formatter part to account for the AST change.
---------
Co-authored-by: David Szotten <davidszotten@gmail.com>
## Summary
This PR updates the string nodes (`ExprStringLiteral`,
`ExprBytesLiteral`, and `ExprFString`) to account for implicit string
concatenation.
### Motivation
In Python, implicit string concatenation are joined while parsing
because the interpreter doesn't require the information for each part.
While that's feasible for an interpreter, it falls short for a static
analysis tool where having such information is more useful. Currently,
various parts of the code uses the lexer to get the individual string
parts.
One of the main challenge this solves is that of string formatting.
Currently, the formatter relies on the lexer to get the individual
string parts, and formats them including the comments accordingly. But,
with PEP 701, f-string can also contain comments. Without this change,
it becomes very difficult to add support for f-string formatting.
### Implementation
The initial proposal was made in this discussion:
https://github.com/astral-sh/ruff/discussions/6183#discussioncomment-6591993.
There were various AST designs which were explored for this task which
are available in the linked internal document[^1].
The selected variant was the one where the nodes were kept as it is
except that the `implicit_concatenated` field was removed and instead a
new struct was added to the `Expr*` struct. This would be a private
struct would contain the actual implementation of how the AST is
designed for both single and implicitly concatenated strings.
This implementation is achieved through an enum with two variants:
`Single` and `Concatenated` to avoid allocating a vector even for single
strings. There are various public methods available on the value struct
to query certain information regarding the node.
The nodes are structured in the following way:
```
ExprStringLiteral - "foo" "bar"
|- StringLiteral - "foo"
|- StringLiteral - "bar"
ExprBytesLiteral - b"foo" b"bar"
|- BytesLiteral - b"foo"
|- BytesLiteral - b"bar"
ExprFString - "foo" f"bar {x}"
|- FStringPart::Literal - "foo"
|- FStringPart::FString - f"bar {x}"
|- StringLiteral - "bar "
|- FormattedValue - "x"
```
[^1]: Internal document:
https://www.notion.so/astral-sh/Implicit-String-Concatenation-e036345dc48943f89e416c087bf6f6d9?pvs=4
#### Visitor
The way the nodes are structured is that the entire string, including
all the parts that are implicitly concatenation, is a single node
containing individual nodes for the parts. The previous section has a
representation of that tree for all the string nodes. This means that
new visitor methods are added to visit the individual parts of string,
bytes, and f-strings for `Visitor`, `PreorderVisitor`, and
`Transformer`.
## Test Plan
- `cargo insta test --workspace --all-features --unreferenced reject`
- Verify that the ecosystem results are unchanged
Update to [Rust
1.74](https://blog.rust-lang.org/2023/11/16/Rust-1.74.0.html) and use
the new clippy lints table.
The update itself introduced a new clippy lint about superfluous hashes
in raw strings, which got removed.
I moved our lint config from `rustflags` to the newly stabilized
[workspace.lints](https://doc.rust-lang.org/stable/cargo/reference/workspaces.html#the-lints-table).
One consequence is that we have to `unsafe_code = "warn"` instead of
"forbid" because the latter now actually bans unsafe code:
```
error[E0453]: allow(unsafe_code) incompatible with previous forbid
--> crates/ruff_source_file/src/newlines.rs:62:17
|
62 | #[allow(unsafe_code)]
| ^^^^^^^^^^^ overruled by previous forbid
|
= note: `forbid` lint level was set on command line
```
---------
Co-authored-by: Charlie Marsh <charlie.r.marsh@gmail.com>
## Summary
This PR splits the `Constant` enum as individual literal nodes. It
introduces the following new nodes for each variant:
* `ExprStringLiteral`
* `ExprBytesLiteral`
* `ExprNumberLiteral`
* `ExprBooleanLiteral`
* `ExprNoneLiteral`
* `ExprEllipsisLiteral`
The main motivation behind this refactor is to introduce the new AST
node for implicit string concatenation in the coming PR. The elements of
that node will be either a string literal, bytes literal or a f-string
which can be implemented using an enum. This means that a string or
bytes literal cannot be represented by `Constant::Str` /
`Constant::Bytes` which creates an inconsistency.
This PR avoids that inconsistency by splitting the constant nodes into
it's own literal nodes, literal being the more appropriate naming
convention from a static analysis tool perspective.
This also makes working with literals in the linter and formatter much
more ergonomic like, for example, if one would want to check if this is
a string literal, it can be done easily using
`Expr::is_string_literal_expr` or matching against `Expr::StringLiteral`
as oppose to matching against the `ExprConstant` and enum `Constant`. A
few AST helper methods can be simplified as well which will be done in a
follow-up PR.
This introduces a new `Expr::is_literal_expr` method which is the same
as `Expr::is_constant_expr`. There are also intermediary changes related
to implicit string concatenation which are quiet less. This is done so
as to avoid having a huge PR which this already is.
## Test Plan
1. Verify and update all of the existing snapshots (parser, visitor)
2. Verify that the ecosystem check output remains **unchanged** for both
the linter and formatter
### Formatter ecosystem check
#### `main`
| project | similarity index | total files | changed files |
|----------------|------------------:|------------------:|------------------:|
| cpython | 0.75803 | 1799 | 1647 |
| django | 0.99983 | 2772 | 34 |
| home-assistant | 0.99953 | 10596 | 186 |
| poetry | 0.99891 | 317 | 17 |
| transformers | 0.99966 | 2657 | 330 |
| twine | 1.00000 | 33 | 0 |
| typeshed | 0.99978 | 3669 | 20 |
| warehouse | 0.99977 | 654 | 13 |
| zulip | 0.99970 | 1459 | 22 |
#### `dhruv/constant-to-literal`
| project | similarity index | total files | changed files |
|----------------|------------------:|------------------:|------------------:|
| cpython | 0.75803 | 1799 | 1647 |
| django | 0.99983 | 2772 | 34 |
| home-assistant | 0.99953 | 10596 | 186 |
| poetry | 0.99891 | 317 | 17 |
| transformers | 0.99966 | 2657 | 330 |
| twine | 1.00000 | 33 | 0 |
| typeshed | 0.99978 | 3669 | 20 |
| warehouse | 0.99977 | 654 | 13 |
| zulip | 0.99970 | 1459 | 22 |
## Summary
This PR adds a new `Singleton` enum for the `PatternMatchSingleton`
node.
Earlier the node was using the `Constant` enum but the value for this
pattern can only be either `None`, `True` or `False`. With the coming PR
to remove the `Constant`, this node required a new type to fill in.
This also has the benefit of narrowing the type down to only the
possible values for the node as evident by the removal of `unreachable`.
## Test Plan
Update the AST snapshots and run `cargo test`.
