## Summary
Garbage collect ASTs once we are done checking a given file. Queries
with a cross-file dependency on the AST will reparse the file on demand.
This reduces ty's peak memory usage by ~20-30%.
The primary change of this PR is adding a `node_index` field to every
AST node, that is assigned by the parser. `ParsedModule` can use this to
create a flat index of AST nodes any time the file is parsed (or
reparsed). This allows `AstNodeRef` to simply index into the current
instance of the `ParsedModule`, instead of storing a pointer directly.
The indices are somewhat hackily (using an atomic integer) assigned by
the `parsed_module` query instead of by the parser directly. Assigning
the indices in source-order in the (recursive) parser turns out to be
difficult, and collecting the nodes during semantic indexing is
impossible as `SemanticIndex` does not hold onto a specific
`ParsedModuleRef`, which the pointers in the flat AST are tied to. This
means that we have to do an extra AST traversal to assign and collect
the nodes into a flat index, but the small performance impact (~3% on
cold runs) seems worth it for the memory savings.
Part of https://github.com/astral-sh/ty/issues/214.
This PR implements template strings (t-strings) in the parser and
formatter for Ruff.
Minimal changes necessary to compile were made in other parts of the code (e.g. ty, the linter, etc.). These will be covered properly in follow-up PRs.
<!--
Thank you for contributing to Ruff! To help us out with reviewing,
please consider the following:
- Does this pull request include a summary of the change? (See below.)
- Does this pull request include a descriptive title?
- Does this pull request include references to any relevant issues?
-->
## Summary
I decided to disable the new
[`needless_continue`](https://rust-lang.github.io/rust-clippy/master/index.html#needless_continue)
rule because I often found the explicit `continue` more readable over an
empty block or having to invert the condition of an other branch.
## Test Plan
`cargo test`
---------
Co-authored-by: Alex Waygood <Alex.Waygood@Gmail.com>
## Summary
I don't remember exactly when we made `Identifier` a node but it is now
considered a node (it implements `AnyNodeRef`, it has a range). However,
we never updated
the `SourceOrderVisitor` to visit identifiers because we never had a use
case for it and visiting new nodes can change how the formatter
associates comments (breaking change!).
This PR updates the `SourceOrderVisitor` to visit identifiers and
changes the formatter comment visitor to skip identifiers (updating the
visitor might be desired because it could help simplifying some comment
placement logic but this is out of scope for this PR).
## Test Plan
Tests, updated snapshot tests
## Summary
We renamed the `PreorderVisitor` to `SourceOrderVisitor` a long time ago
but it seems that we missed to rename the `visit_preorder` functions to
`visit_source_order`.
This PR renames `visit_preorder` to `visit_source_order`
## Test Plan
`cargo test`
## Summary
This is part of the preparation for detecting syntax errors in the
parser from https://github.com/astral-sh/ruff/pull/16090/. As suggested
in [this
comment](https://github.com/astral-sh/ruff/pull/16090/#discussion_r1953084509),
I started working on a `ParseOptions` struct that could be stored in the
parser. For this initial refactor, I only made it hold the existing
`Mode` option, but for syntax errors, we will also need it to have a
`PythonVersion`. For that use case, I'm picturing something like a
`ParseOptions::with_python_version` method, so you can extend the
current calls to something like
```rust
ParseOptions::from(mode).with_python_version(settings.target_version)
```
But I thought it was worth adding `ParseOptions` alone without changing
any other behavior first.
Most of the diff is just updating call sites taking `Mode` to take
`ParseOptions::from(Mode)` or those taking `PySourceType`s to take
`ParseOptions::from(PySourceType)`. The interesting changes are in the
new `parser/options.rs` file and smaller parts of `parser/mod.rs` and
`ruff_python_parser/src/lib.rs`.
## Test Plan
Existing tests, this should not change any behavior.
While looking into potential AST optimizations, I noticed the `AstNode`
trait and `AnyNode` type aren't used anywhere in Ruff or Red Knot. It
looks like they might be historical artifacts of previous ways of
consuming AST nodes?
- `AstNode::cast`, `AstNode::cast_ref`, and `AstNode::can_cast` are not
used anywhere.
- Since `cast_ref` isn't needed anymore, the `Ref` associated type isn't
either.
This is a pure refactoring, with no intended behavior changes.
## Summary
This PR updates the parser to remove building the `CommentRanges` and
instead it'll be built by the linter and the formatter when it's
required.
For the linter, it'll be built and owned by the `Indexer` while for the
formatter it'll be built from the `Tokens` struct and passed as an
argument.
## Test Plan
`cargo insta test`
## Summary
This PR updates the entire parser stack in multiple ways:
### Make the lexer lazy
* https://github.com/astral-sh/ruff/pull/11244
* https://github.com/astral-sh/ruff/pull/11473
Previously, Ruff's lexer would act as an iterator. The parser would
collect all the tokens in a vector first and then process the tokens to
create the syntax tree.
The first task in this project is to update the entire parsing flow to
make the lexer lazy. This includes the `Lexer`, `TokenSource`, and
`Parser`. For context, the `TokenSource` is a wrapper around the `Lexer`
to filter out the trivia tokens[^1]. Now, the parser will ask the token
source to get the next token and only then the lexer will continue and
emit the token. This means that the lexer needs to be aware of the
"current" token. When the `next_token` is called, the current token will
be updated with the newly lexed token.
The main motivation to make the lexer lazy is to allow re-lexing a token
in a different context. This is going to be really useful to make the
parser error resilience. For example, currently the emitted tokens
remains the same even if the parser can recover from an unclosed
parenthesis. This is important because the lexer emits a
`NonLogicalNewline` in parenthesized context while a normal `Newline` in
non-parenthesized context. This different kinds of newline is also used
to emit the indentation tokens which is important for the parser as it's
used to determine the start and end of a block.
Additionally, this allows us to implement the following functionalities:
1. Checkpoint - rewind infrastructure: The idea here is to create a
checkpoint and continue lexing. At a later point, this checkpoint can be
used to rewind the lexer back to the provided checkpoint.
2. Remove the `SoftKeywordTransformer` and instead use lookahead or
speculative parsing to determine whether a soft keyword is a keyword or
an identifier
3. Remove the `Tok` enum. The `Tok` enum represents the tokens emitted
by the lexer but it contains owned data which makes it expensive to
clone. The new `TokenKind` enum just represents the type of token which
is very cheap.
This brings up a question as to how will the parser get the owned value
which was stored on `Tok`. This will be solved by introducing a new
`TokenValue` enum which only contains a subset of token kinds which has
the owned value. This is stored on the lexer and is requested by the
parser when it wants to process the data. For example:
8196720f80/crates/ruff_python_parser/src/parser/expression.rs (L1260-L1262)
[^1]: Trivia tokens are `NonLogicalNewline` and `Comment`
### Remove `SoftKeywordTransformer`
* https://github.com/astral-sh/ruff/pull/11441
* https://github.com/astral-sh/ruff/pull/11459
* https://github.com/astral-sh/ruff/pull/11442
* https://github.com/astral-sh/ruff/pull/11443
* https://github.com/astral-sh/ruff/pull/11474
For context,
https://github.com/RustPython/RustPython/pull/4519/files#diff-5de40045e78e794aa5ab0b8aacf531aa477daf826d31ca129467703855408220
added support for soft keywords in the parser which uses infinite
lookahead to classify a soft keyword as a keyword or an identifier. This
is a brilliant idea as it basically wraps the existing Lexer and works
on top of it which means that the logic for lexing and re-lexing a soft
keyword remains separate. The change here is to remove
`SoftKeywordTransformer` and let the parser determine this based on
context, lookahead and speculative parsing.
* **Context:** The transformer needs to know the position of the lexer
between it being at a statement position or a simple statement position.
This is because a `match` token starts a compound statement while a
`type` token starts a simple statement. **The parser already knows
this.**
* **Lookahead:** Now that the parser knows the context it can perform
lookahead of up to two tokens to classify the soft keyword. The logic
for this is mentioned in the PR implementing it for `type` and `match
soft keyword.
* **Speculative parsing:** This is where the checkpoint - rewind
infrastructure helps. For `match` soft keyword, there are certain cases
for which we can't classify based on lookahead. The idea here is to
create a checkpoint and keep parsing. Based on whether the parsing was
successful and what tokens are ahead we can classify the remaining
cases. Refer to #11443 for more details.
If the soft keyword is being parsed in an identifier context, it'll be
converted to an identifier and the emitted token will be updated as
well. Refer
8196720f80/crates/ruff_python_parser/src/parser/expression.rs (L487-L491).
The `case` soft keyword doesn't require any special handling because
it'll be a keyword only in the context of a match statement.
### Update the parser API
* https://github.com/astral-sh/ruff/pull/11494
* https://github.com/astral-sh/ruff/pull/11505
Now that the lexer is in sync with the parser, and the parser helps to
determine whether a soft keyword is a keyword or an identifier, the
lexer cannot be used on its own. The reason being that it's not
sensitive to the context (which is correct). This means that the parser
API needs to be updated to not allow any access to the lexer.
Previously, there were multiple ways to parse the source code:
1. Passing the source code itself
2. Or, passing the tokens
Now that the lexer and parser are working together, the API
corresponding to (2) cannot exists. The final API is mentioned in this
PR description: https://github.com/astral-sh/ruff/pull/11494.
### Refactor the downstream tools (linter and formatter)
* https://github.com/astral-sh/ruff/pull/11511
* https://github.com/astral-sh/ruff/pull/11515
* https://github.com/astral-sh/ruff/pull/11529
* https://github.com/astral-sh/ruff/pull/11562
* https://github.com/astral-sh/ruff/pull/11592
And, the final set of changes involves updating all references of the
lexer and `Tok` enum. This was done in two-parts:
1. Update all the references in a way that doesn't require any changes
from this PR i.e., it can be done independently
* https://github.com/astral-sh/ruff/pull/11402
* https://github.com/astral-sh/ruff/pull/11406
* https://github.com/astral-sh/ruff/pull/11418
* https://github.com/astral-sh/ruff/pull/11419
* https://github.com/astral-sh/ruff/pull/11420
* https://github.com/astral-sh/ruff/pull/11424
2. Update all the remaining references to use the changes made in this
PR
For (2), there were various strategies used:
1. Introduce a new `Tokens` struct which wraps the token vector and add
methods to query a certain subset of tokens. These includes:
1. `up_to_first_unknown` which replaces the `tokenize` function
2. `in_range` and `after` which replaces the `lex_starts_at` function
where the former returns the tokens within the given range while the
latter returns all the tokens after the given offset
2. Introduce a new `TokenFlags` which is a set of flags to query certain
information from a token. Currently, this information is only limited to
any string type token but can be expanded to include other information
in the future as needed. https://github.com/astral-sh/ruff/pull/11578
3. Move the `CommentRanges` to the parsed output because this
information is common to both the linter and the formatter. This removes
the need for `tokens_and_ranges` function.
## Test Plan
- [x] Update and verify the test snapshots
- [x] Make sure the entire test suite is passing
- [x] Make sure there are no changes in the ecosystem checks
- [x] Run the fuzzer on the parser
- [x] Run this change on dozens of open-source projects
### Running this change on dozens of open-source projects
Refer to the PR description to get the list of open source projects used
for testing.
Now, the following tests were done between `main` and this branch:
1. Compare the output of `--select=E999` (syntax errors)
2. Compare the output of default rule selection
3. Compare the output of `--select=ALL`
**Conclusion: all output were same**
## What's next?
The next step is to introduce re-lexing logic and update the parser to
feed the recovery information to the lexer so that it can emit the
correct token. This moves us one step closer to having error resilience
in the parser and provides Ruff the possibility to lint even if the
source code contains syntax errors.
(Supersedes #9152, authored by @LaBatata101)
## Summary
This PR replaces the current parser generated from LALRPOP to a
hand-written recursive descent parser.
It also updates the grammar for [PEP
646](https://peps.python.org/pep-0646/) so that the parser outputs the
correct AST. For example, in `data[*x]`, the index expression is now a
tuple with a single starred expression instead of just a starred
expression.
Beyond the performance improvements, the parser is also error resilient
and can provide better error messages. The behavior as seen by any
downstream tools isn't changed. That is, the linter and formatter can
still assume that the parser will _stop_ at the first syntax error. This
will be updated in the following months.
For more details about the change here, refer to the PR corresponding to
the individual commits and the release blog post.
## Test Plan
Write _lots_ and _lots_ of tests for both valid and invalid syntax and
verify the output.
## Acknowledgements
- @MichaReiser for reviewing 100+ parser PRs and continuously providing
guidance throughout the project
- @LaBatata101 for initiating the transition to a hand-written parser in
#9152
- @addisoncrump for implementing the fuzzer which helped
[catch](https://github.com/astral-sh/ruff/pull/10903)
[a](https://github.com/astral-sh/ruff/pull/10910)
[lot](https://github.com/astral-sh/ruff/pull/10966)
[of](https://github.com/astral-sh/ruff/pull/10896)
[bugs](https://github.com/astral-sh/ruff/pull/10877)
---------
Co-authored-by: Victor Hugo Gomes <labatata101@linuxmail.org>
Co-authored-by: Micha Reiser <micha@reiser.io>
## Summary
This is a follow up on https://github.com/astral-sh/ruff/pull/10492
I incorrectly assumed that `subscript.value.end()` always points past
the value. However, this isn't the case for parenthesized values where
the end "ends" before the parentheses.
## Test Plan
I added new tests for the parenthesized case.
## Summary
This PR fixes an instability where formatting a subscribt
where the `slice` is not an `ExprSlice` and it has a trailing
end-of-line comment after its opening `[` required two formatting passes
to be stable.
The fix is to associate the trailing end-of-line comment as dangling
comment on `[` to preserve its position, similar to how Ruff does it for
other parenthesized expressions.
This also matches how trailing end-of-line subscript comments are
handled when the `slice` is an `ExprSlice`.
Fixes https://github.com/astral-sh/ruff/issues/10355
## Versioning
Shipping this as part of a patch release is fine because:
* It fixes a stability issue
* It doesn't impact already formatted code because Ruff would already
have moved to the comment to the end of the line (instead of preserving
it)
## Test Plan
Added tests
## Summary
I used `codespell` and `gramma` to identify mispellings and grammar
errors throughout the codebase and fixed them. I tried not to make any
controversial changes, but feel free to revert as you see fit.
## Summary
Fix#10282
This PR updates the Python grammar to include the `*` character in
`*args` `**kwargs` in the range of the `Parameter`
```
def f(*args, **kwargs): pass
# ~~~~ ~~~~~~ <-- range before the PR
# ^^^^^ ^^^^^^^^ <-- range after
```
The invalid syntax `def f(*, **kwargs): ...` is also now correctly
reported.
## Test Plan
Test cases were added to `function.rs`.
The expression types in our AST are called `ExprYield`, `ExprAwait`,
`ExprStringLiteral` etc, except `ExprNamedExpr`, `ExprIfExpr` and
`ExprGenratorExpr`. This seems to align with [Python AST's
naming](https://docs.python.org/3/library/ast.html) but feels
inconsistent and excessive.
This PR removes the `Expr` postfix from `ExprNamedExpr`, `ExprIfExpr`,
and `ExprGeneratorExpr`.
<!--
Thank you for contributing to Ruff! To help us out with reviewing,
please consider the following:
- Does this pull request include a summary of the change? (See below.)
- Does this pull request include a descriptive title?
- Does this pull request include references to any relevant issues?
-->
Fixes#6611
## Summary
This lint rule spots comments that are _intended_ to suppress or enable
the formatter, but will be ignored by the Ruff formatter.
We borrow some functions the formatter uses for determining comment
placement / putting them in context within an AST.
The analysis function uses an AST visitor to visit each comment and
attach it to the AST. It then uses that context to check:
1. Is this comment in an expression?
2. Does this comment have bad placement? (e.g. a `# fmt: skip` above a
function instead of at the end of a line)
3. Is this comment redundant?
4. Does this comment actually suppress any code?
5. Does this comment have ambiguous placement? (e.g. a `# fmt: off`
above an `else:` block)
If any of these are true, a violation is thrown. The reported reason
depends on the order of the above check-list: in other words, a `# fmt:
skip` comment on its own line within a list expression will be reported
as being in an expression, since that reason takes priority.
The lint suggests removing the comment as an unsafe fix, regardless of
the reason.
## Test Plan
A snapshot test has been created.
## Summary
_This is preview only feature and is available using the `--preview`
command-line flag._
With the implementation of [PEP 701] in Python 3.12, f-strings can now
be broken into multiple lines, can contain comments, and can re-use the
same quote character. Currently, no other Python formatter formats the
f-strings so there's some discussion which needs to happen in defining
the style used for f-string formatting. Relevant discussion:
https://github.com/astral-sh/ruff/discussions/9785
The goal for this PR is to add minimal support for f-string formatting.
This would be to format expression within the replacement field without
introducing any major style changes.
### Newlines
The heuristics for adding newline is similar to that of
[Prettier](https://prettier.io/docs/en/next/rationale.html#template-literals)
where the formatter would only split an expression in the replacement
field across multiple lines if there was already a line break within the
replacement field.
In other words, the formatter would not add any newlines unless they
were already present i.e., they were added by the user. This makes
breaking any expression inside an f-string optional and in control of
the user. For example,
```python
# We wouldn't break this
aaaaaaaaaaa = f"asaaaaaaaaaaaaaaaa { aaaaaaaaaaaa + bbbbbbbbbbbb + ccccccccccccccc } cccccccccc"
# But, we would break the following as there's already a newline
aaaaaaaaaaa = f"asaaaaaaaaaaaaaaaa {
aaaaaaaaaaaa + bbbbbbbbbbbb + ccccccccccccccc } cccccccccc"
```
If there are comments in any of the replacement field of the f-string,
then it will always be a multi-line f-string in which case the formatter
would prefer to break expressions i.e., introduce newlines. For example,
```python
x = f"{ # comment
a }"
```
### Quotes
The logic for formatting quotes remains unchanged. The existing logic is
used to determine the necessary quote char and is used accordingly.
Now, if the expression inside an f-string is itself a string like, then
we need to make sure to preserve the existing quote and not change it to
the preferred quote unless it's 3.12. For example,
```python
f"outer {'inner'} outer"
# For pre 3.12, preserve the single quote
f"outer {'inner'} outer"
# While for 3.12 and later, the quotes can be changed
f"outer {"inner"} outer"
```
But, for triple-quoted strings, we can re-use the same quote char unless
the inner string is itself a triple-quoted string.
```python
f"""outer {"inner"} outer""" # valid
f"""outer {'''inner'''} outer""" # preserve the single quote char for the inner string
```
### Debug expressions
If debug expressions are present in the replacement field of a f-string,
then the whitespace needs to be preserved as they will be rendered as it
is (for example, `f"{ x = }"`. If there are any nested f-strings, then
the whitespace in them needs to be preserved as well which means that
we'll stop formatting the f-string as soon as we encounter a debug
expression.
```python
f"outer { x = !s :.3f}"
# ^^
# We can remove these whitespaces
```
Now, the whitespace doesn't need to be preserved around conversion spec
and format specifiers, so we'll format them as usual but we won't be
formatting any nested f-string within the format specifier.
### Miscellaneous
- The
[`hug_parens_with_braces_and_square_brackets`](https://github.com/astral-sh/ruff/issues/8279)
preview style isn't implemented w.r.t. the f-string curly braces.
- The
[indentation](https://github.com/astral-sh/ruff/discussions/9785#discussioncomment-8470590)
is always relative to the f-string containing statement
## Test Plan
* Add new test cases
* Review existing snapshot changes
* Review the ecosystem changes
[PEP 701]: https://peps.python.org/pep-0701/
## Summary
This PR implements the `blank_line_after_nested_stub_class` preview
style in the formatter.
The logic is divided into 3 parts:
1. In between preceding and following nodes at top level and nested
suite
2. When there's a trailing comment after the class
3. When there is no following node from (1) which is the case when it's
the last or the only node in a suite
We handle (3) with `FormatLeadingAlternateBranchComments`.
## Test Plan
- Add new test cases and update existing snapshots
- Checked the `typeshed` diff
fixes: #8891
## Summary
This is similar to https://github.com/astral-sh/ruff/pull/8876, but more
limited in scope:
1. It only applies to `# fmt: skip` (like Black). Like `# isort: on`, `#
fmt: on` needs to be on its own line (still).
2. It only delimits on `#`, so you can do `# fmt: skip # noqa`, but not
`# fmt: skip - some other content` or `# fmt: skip; noqa`.
If we want to support the `;`-delimited version, we should revisit
later, since we don't support that in the linter (so `# fmt: skip; noqa`
wouldn't register a `noqa`).
Closes https://github.com/astral-sh/ruff/issues/8892.
## Summary
I always found it odd that we had to pass this in, since it's really
higher-level context for the error. The awkwardness is further evidenced
by the fact that we pass in fake values everywhere (even outside of
tests). The source path isn't actually used to display the error; it's
only accessed elsewhere to _re-display_ the error in certain cases. This
PR modifies to instead pass the path directly in those cases.
This PR removes several uses of `unsafe`. I generally limited myself to
low hanging fruit that I could see. There are still a few remaining uses
of `unsafe` that looked a bit more difficult to remove (if possible at
all). But this gets rid of a good chunk of them.
I put each `unsafe` removal into its own commit with a justification for
why I did it. So I would encourage reviewing this PR commit-by-commit.
That way, we can legislate them independently. It's no problem to drop a
commit if we feel the `unsafe` should stay in that case.
## Summary
This PR updates the string nodes (`ExprStringLiteral`,
`ExprBytesLiteral`, and `ExprFString`) to account for implicit string
concatenation.
### Motivation
In Python, implicit string concatenation are joined while parsing
because the interpreter doesn't require the information for each part.
While that's feasible for an interpreter, it falls short for a static
analysis tool where having such information is more useful. Currently,
various parts of the code uses the lexer to get the individual string
parts.
One of the main challenge this solves is that of string formatting.
Currently, the formatter relies on the lexer to get the individual
string parts, and formats them including the comments accordingly. But,
with PEP 701, f-string can also contain comments. Without this change,
it becomes very difficult to add support for f-string formatting.
### Implementation
The initial proposal was made in this discussion:
https://github.com/astral-sh/ruff/discussions/6183#discussioncomment-6591993.
There were various AST designs which were explored for this task which
are available in the linked internal document[^1].
The selected variant was the one where the nodes were kept as it is
except that the `implicit_concatenated` field was removed and instead a
new struct was added to the `Expr*` struct. This would be a private
struct would contain the actual implementation of how the AST is
designed for both single and implicitly concatenated strings.
This implementation is achieved through an enum with two variants:
`Single` and `Concatenated` to avoid allocating a vector even for single
strings. There are various public methods available on the value struct
to query certain information regarding the node.
The nodes are structured in the following way:
```
ExprStringLiteral - "foo" "bar"
|- StringLiteral - "foo"
|- StringLiteral - "bar"
ExprBytesLiteral - b"foo" b"bar"
|- BytesLiteral - b"foo"
|- BytesLiteral - b"bar"
ExprFString - "foo" f"bar {x}"
|- FStringPart::Literal - "foo"
|- FStringPart::FString - f"bar {x}"
|- StringLiteral - "bar "
|- FormattedValue - "x"
```
[^1]: Internal document:
https://www.notion.so/astral-sh/Implicit-String-Concatenation-e036345dc48943f89e416c087bf6f6d9?pvs=4
#### Visitor
The way the nodes are structured is that the entire string, including
all the parts that are implicitly concatenation, is a single node
containing individual nodes for the parts. The previous section has a
representation of that tree for all the string nodes. This means that
new visitor methods are added to visit the individual parts of string,
bytes, and f-strings for `Visitor`, `PreorderVisitor`, and
`Transformer`.
## Test Plan
- `cargo insta test --workspace --all-features --unreferenced reject`
- Verify that the ecosystem results are unchanged
