The test creates a cache from multiple sources and injects faults (once
using invalid data and once by making the files unreadable on the fs
level), then resolves again.
I didn't test git because it has its own locking and correctness logic.
The main drawback is that this test is slow (2.5s for me), we could
`#[ignore]` it.
This is a pure refactor to follow-up #690, to separate the metadata that
we know upfront about distributions (like the version, for
registry-based distributions) vs. the metadata that requires building
(like the version, for URL-based distributions).
We now show the fully-resolved URL, rather than the URL as given by the
user, _everywhere_ except for the output resolution file (which should
retain relative paths, unexpanded environment variables, etc.).
Closes https://github.com/astral-sh/puffin/issues/687.
With `Option<T>` and `.unwrap_or_default()` later, the default of `T`
isn't shown in the help output.
Old:
```
--link-mode <LINK_MODE>
The method to use when installing packages from the global cache
Possible values:
- clone: Clone (i.e., copy-on-write) packages from the wheel into the site packages
- copy: Copy packages from the wheel into the site packages
- hardlink: Hard link packages from the wheel into the site packages
-q, --quiet
Do not print any output
--resolution <RESOLUTION>
Possible values:
- highest: Resolve the highest compatible version of each package
- lowest: Resolve the lowest compatible version of each package
- lowest-direct: Resolve the lowest compatible version of any direct dependencies, and the highest compatible version of any transitive dependencies
--prerelease <PRERELEASE>
Possible values:
- disallow: Disallow all pre-release versions
- allow: Allow all pre-release versions
- if-necessary: Allow pre-release versions if all versions of a package are pre-release
- explicit: Allow pre-release versions for first-party packages with explicit pre-release markers in their version requirements
- if-necessary-or-explicit: Allow pre-release versions if all versions of a package are pre-release, or if the package has an explicit pre-release marker in its version requirements
```
New:
```
--link-mode <LINK_MODE>
The method to use when installing packages from the global cache
[default: hardlink]
Possible values:
- clone: Clone (i.e., copy-on-write) packages from the wheel into the site packages
- copy: Copy packages from the wheel into the site packages
- hardlink: Hard link packages from the wheel into the site packages
-q, --quiet
Do not print any output
--resolution <RESOLUTION>
[default: highest]
Possible values:
- highest: Resolve the highest compatible version of each package
- lowest: Resolve the lowest compatible version of each package
- lowest-direct: Resolve the lowest compatible version of any direct dependencies, and the highest compatible version of any transitive dependencies
--prerelease <PRERELEASE>
[default: if-necessary-or-explicit]
Possible values:
- disallow: Disallow all pre-release versions
- allow: Allow all pre-release versions
- if-necessary: Allow pre-release versions if all versions of a package are pre-release
- explicit: Allow pre-release versions for first-party packages with explicit pre-release markers in their version requirements
- if-necessary-or-explicit: Allow pre-release versions if all versions of a package are pre-release, or if the package has an explicit pre-release marker in its version requirements
```
This PR uses borrowed data in `BuildDispatch` which makes creating a
`BuildDispatch` extremely cheap (only one allocation, for the Python
executable). I can be talked out of this, it will have no measurable
impact.
Separate branch for rebasing #677 onto main because i don't trust the
rebase enough to force push.
Closes#677.
---
If you install `black` from PyPI, then `-e ../black`, we need to
uninstall the existing `black`. This sounds simple, but that in turn
requires that we _know_ `-e ../black` maps to the package `black`, so
that we can mark it for uninstallation in the install plan. This, in
turn, means that we need to build editable dependencies prior to the
install plan.
This is just a bunch of reorganization to fix that specific bug
(installing multiple versions of `black` if you run through the above
workflow): we now run through the list of editables upfront, mark those
that are already installed, build those that aren't, and then ensure
that `InstallPlan` correctly removes those that need to be removed, etc.
Closes#676.
Co-authored-by: Charlie Marsh <charlie.r.marsh@gmail.com>
Per the title: adds support for `-e` installs to `puffin pip-install`.
There were some challenges here around threading the editable installs
to the right places. Namely, we want to build _once_, then reuse the
editable installs from the resolution. At present, we were losing the
`editable: true` flag on the `Dist` that came back through the
resolution, so it required some changes to the resolver.
Closes https://github.com/astral-sh/puffin/issues/672.
This PR modifies `SitePackages` to store all distributions in a flat
vector, and maintain two indexes (hash maps) from "per-element data for
an element in the vector" to "index of that element". This enables us to
maintain a map on both package name and editable URL.
`pip` supports installing packages without names (e.g.,
`git+https://github.com/pallets/flask.git`), but it doesn't adhere to
the PEP grammar, and we don't yet support it (and may never) (#313).
This PR adds a dedicated error path for such cases, to ensure that we
can give meaningful feedback to the user:
```
error: Couldn't parse requirement in requirements.in position 0 to 18
Caused by: URL requirement is missing a package name; expected: `package_name @ https://google.com`
https://google.com
^^^^^^^^^^^^^^^^^^
```
Closes https://github.com/astral-sh/puffin/issues/650.
This gives a 1.23 speedup on transformers-extras. We could change to
msgpack for the entire cache if we want. I only tried this format and
postcard so far, where postcard was much slower (like 1.6s).
I don't actually want to merge it like this, i wanted to figure out the
ballpark of improvement for switching away from json.
```
hyperfine --warmup 3 --runs 10 "target/profiling/puffin pip-compile --cache-dir cache-msgpack scripts/requirements/transformers-extras.in" "target/profiling/branch pip-compile scripts/requirements/transformers-extras.in"
Benchmark 1: target/profiling/puffin pip-compile --cache-dir cache-msgpack scripts/requirements/transformers-extras.in
Time (mean ± σ): 179.1 ms ± 4.8 ms [User: 157.5 ms, System: 48.1 ms]
Range (min … max): 174.9 ms … 188.1 ms 10 runs
Benchmark 2: target/profiling/branch pip-compile scripts/requirements/transformers-extras.in
Time (mean ± σ): 221.1 ms ± 6.7 ms [User: 208.1 ms, System: 46.5 ms]
Range (min … max): 213.5 ms … 235.5 ms 10 runs
Summary
target/profiling/puffin pip-compile --cache-dir cache-msgpack scripts/requirements/transformers-extras.in ran
1.23 ± 0.05 times faster than target/profiling/branch pip-compile scripts/requirements/transformers-extras.in
```
Disadvantage: We can't manually look into the cache anymore to debug
things
- [ ] Check more formats, i currently only tested json, msgpack and
postcard, there should be other formats, too
- [x] Switch over `CachedByTimestamp` serialization (for the interpreter
caching)
- [x] Switch over error handling and make sure puffin is still resilient
to cache failure
This enables us to remove a number of allocations (in particular,
`peek_while` and `take_while` no longer allocate). It also makes it
trivial to move the cursor to a new location, since you can just slice
and call `.chars()`. At present, moving to a new location would require
converting the iterator to a string, then back to a character iterator.
Two low-hanging fruits as optimizations for version parsing: A fast path
for release only versions and removing the regex from version specifiers
(still calling into version's parsing regex if required). This enables
optimizing the serde format since we now see the serde part instead of
only PEP 440 parsing. I intentionally didn't rewrite the full PEP 440 at
this step.
```console
$ hyperfine --warmup 5 --runs 50 "target/profiling/puffin pip-compile scripts/requirements/transformers-extras.in" "target/profiling/main pip-compile scripts/requirements/transformers-extras.in"
Benchmark 1: target/profiling/puffin pip-compile scripts/requirements/transformers-extras.in
Time (mean ± σ): 217.1 ms ± 3.2 ms [User: 194.0 ms, System: 55.1 ms]
Range (min … max): 211.0 ms … 228.1 ms 50 runs
Benchmark 2: target/profiling/main pip-compile scripts/requirements/transformers-extras.in
Time (mean ± σ): 276.7 ms ± 5.7 ms [User: 252.4 ms, System: 54.6 ms]
Range (min … max): 268.9 ms … 303.5 ms 50 runs
Summary
target/profiling/puffin pip-compile scripts/requirements/transformers-extras.in ran
1.27 ± 0.03 times faster than target/profiling/main pip-compile scripts/requirements/transformers-extras.in
```
---------
Co-authored-by: Andrew Gallant <andrew@astral.sh>
## Summary
This PR ensures that we re-use the resolution to install the build
dependencies when building a source distribution. Currently, we only
pass along the list of requirements, and then use the `Finder` to map
each requirement to a distribution. But we already determine the correct
distribution when resolving!
Closes https://github.com/astral-sh/puffin/issues/655.
## Summary
This is more of a hypothetical problem, but the cache manifest could in
theory get out-of-sync with the contents on disk. This PR modifies the
`BuiltWheelMetadata` lookup to warn (but not fail) if the manifest
includes a wheel that no longer exists on disk. You can mimic this by
removing a wheel from the `built-wheels-v0` cache without modifying the
manifest correspondingly.
## Summary
This PR modifies `source_dist.rs` to store source distributions (from
remote URLs) in the cache. The cache structure for registries now looks
like:
<img width="1053" alt="Screen Shot 2023-12-14 at 10 43 43 PM"
src="3c2dbf6b-5926-41f2-b69b-74031741aba8">
(I will update the docs prior to merging, if approved.)
The benefit here is that we can reuse the source distribution (avoid
download + unzipping it) if we need to build multiple wheels. In the
future, it will be even more relevant, since we'll need to reuse the
source distribution to support
https://github.com/astral-sh/puffin/issues/599.
I also included some misc. refactors to DRY up repeated operations and
add some more abstraction to `source_dist.rs`.
## Summary
This PR enables users to express relative dependencies via environment
variables. Like pip, PDM, Hatch, Rye, and others, we now allow users to
express dependencies like:
```text
flask @ file://${PROJECT_ROOT}/flask-3.0.0-py3-none-any.whl
```
In the compiled requirements file, we'll also preserve the unexpanded
environment variable.
Closes https://github.com/astral-sh/puffin/issues/592.
## Summary
This PR adds a `VerbatimUrl` struct to preserve verbatim URLs throughout
the resolution and installation pipeline. In short, alongside the parsed
`Url`, we also keep the URL as written by the user. This enables us to
display the URL exactly as written by the user, rather than the
serialized path that we use internally.
This will be especially useful once we start expanding environment
variables since, at that point, we'll be able to write the version of
the URL that includes the _unexpected_ environment variable to the
output file.
We have some shared utilities beyond `puffin-build` and
`puffin-distribution`, and further, I want to be able to access the
sdist archive extraction logic from `puffin-distribution`. This is
really generic, so moving into its own crate.
This allows us to enforce type safety within the resolver. For example,
in the index, we can remove `String` as a key type and enforce that
callers _must_ present us with a `PackageId`. (This actually caught one
bug, where we were using the SHA rather than the package ID. That bug
shouldn't have had any effect given where it was, since those are 1:1,
but it's still problematic.)
## Summary
When resolving `transformers[tensorboard]`, the `[tensorboard]` extra
doesn't exist. Previously, we returned "unknown" dependencies for this
variant, which leads the resolution to try all versions, then fail. This
PR instead warns, but returns the base dependencies for the package,
which matches `pip`. (Poetry doesn't even warn, it just proceeds as
normal.)
Arguably, it would be better to return a custom incompatibility here and
then propagate... But this PR is better than the status quo, and I don't
know if we have support for that behavior yet...? (\cc @zanieb)
Closes#386.
Closes https://github.com/astral-sh/puffin/issues/423.
## Summary
This PR enables overrides to be passed to `pip-compile` and
`pip-install` via a new `--overrides` flag.
When overrides are provided, we effectively replace any requirements
that are overridden with the overridden versions. This is applied at all
depths of the tree.
The merge semantics are such that we replace _all_ requirements of a
package with _all_ requirements from the overrides files. So, for
example, if a package declares:
```
foo >= 1.0; python_version < '3.11'
foo < 1.0; python_version >= '3.11'
```
And the user provides an override like:
```
foo >= 2.0
```
Then _both_ of the `foo` requirements in the package will be replaced
with the override.
If instead, the user provided an override like:
```
foo >= 2.0; python_version < '3.11'
foo < 3.0; python_version >= '3.11'
```
Then we'd replace _both_ of the original `foo` requirements with both of
these overrides. (In technical terms, for each package in the
requirements file, we flat-map over its overrides.)
Closes https://github.com/astral-sh/puffin/issues/511.
