Previously, we did not consider installed distributions as candidates
while performing resolution. Here, we update the resolver to use
installed distributions that satisfy requirements instead of pulling new
distributions from the registry.
The implementation details are as follows:
- We now provide `SitePackages` to the `CandidateSelector`
- If an installed distribution satisfies the requirement, we prefer it
over remote distributions
- We do not want to allow installed distributions in some cases, i.e.,
upgrade and reinstall
- We address this by introducing an `Exclusions` type which tracks
installed packages to ignore during selection
- There's a new `ResolvedDist` wrapper with `Installed(InstalledDist)`
and `Installable(Dist)` variants
- This lets us pass already installed distributions throughout the
resolver
The user-facing behavior is thoroughly covered in the tests, but
briefly:
- Installing a package that depends on an already-installed package
prefers the local version over the index
- Installing a package with a name that matches an already-installed URL
package does not reinstall from the index
- Reinstalling (--reinstall) a package by name _will_ pull from the
index even if an already-installed URL package is present
- To reinstall the URL package, you must specify the URL in the request
Closes https://github.com/astral-sh/uv/issues/1661
Addresses:
- https://github.com/astral-sh/uv/issues/1476
- https://github.com/astral-sh/uv/issues/1856
- https://github.com/astral-sh/uv/issues/2093
- https://github.com/astral-sh/uv/issues/2282
- https://github.com/astral-sh/uv/issues/2383
- https://github.com/astral-sh/uv/issues/2560
## Test plan
- [x] Reproduction at `charlesnicholson/uv-pep420-bug` passes
- [x] Unit test for editable package
([#1476](https://github.com/astral-sh/uv/issues/1476))
- [x] Unit test for previously installed package with empty registry
- [x] Unit test for local non-editable package
- [x] Unit test for new version available locally but not in registry
([#2093](https://github.com/astral-sh/uv/issues/2093))
- ~[ ] Unit test for wheel not available in registry but already
installed locally
([#2282](https://github.com/astral-sh/uv/issues/2282))~ (seems
complicated and not worthwhile)
- [x] Unit test for install from URL dependency then with matching
version ([#2383](https://github.com/astral-sh/uv/issues/2383))
- [x] Unit test for install of new package that depends on installed
package does not change version
([#2560](https://github.com/astral-sh/uv/issues/2560))
- [x] Unit test that `pip compile` does _not_ consider installed
packages
## Summary
This PR enables the resolver to "accept" URLs, prereleases, and local
version specifiers for direct dependencies of path dependencies. As a
result, `uv pip install .` and `uv pip install -e .` now behave
identically, in that neither has a restriction on URL dependencies and
the like.
Closes https://github.com/astral-sh/uv/issues/2643.
Closes https://github.com/astral-sh/uv/issues/1853.
This is driving me a little crazy and is becoming a larger problem in
#2596 where I need to move more types (like `Upgrade` and `Reinstall`)
into this crate. Anything that's shared across our core resolver,
install, and build crates needs to be defined in this crate to avoid
cyclic dependencies. We've outgrown it being a single file with some
shared traits.
There are no behavioral changes here.
## Summary
When a user runs with `--output-file` and `--generate-hashes`, we should
_only_ update the hashes if the pinned version itself changes.
Closes https://github.com/astral-sh/uv/issues/1530.
The architecture of uv does not necessarily match that of the python
interpreter (#2326). In cross compiling/testing scenarios the operating
system can also mismatch. To solve this, we move arch and os detection
to python, vendoring the relevant pypa/packaging code, preventing
mismatches between what the python interpreter was compiled for and what
uv was compiled for.
To make the scripts more manageable, they are now a directory in a
tempdir and we run them with `python -m` . I've simplified the
pypa/packaging code since we're still building the tags in rust. A
`Platform` is now instantiated by querying the python interpreter for
its platform. The pypa/packaging files are copied verbatim for easier
updates except a `lru_cache()` python 3.7 backport.
Error handling is done by a `"result": "success|error"` field that allow
passing error details to rust:
```console
$ uv venv --no-cache
× Can't use Python at `/home/konsti/projects/uv/.venv/bin/python3`
╰─▶ Unknown operation system `linux`
```
I've used the [maturin sysconfig
collection](855f6d2cb1/sysconfig)
as reference. I'm unsure how to test these changes across the wide
variety of platforms.
Fixes#2326
## Summary
This PR adds support for pip's `--no-build-isolation`. When enabled,
build requirements won't be installed during PEP 517-style builds, but
the source environment _will_ be used when executing the build steps
themselves.
Closes https://github.com/astral-sh/uv/issues/1715.
## Summary
`PythonPlatform` only exists to format paths to directories within
virtual environments based on a root and an OS, so it's now
`VirtualenvLayout`.
`Virtualenv` is now used for non-virtual environment Pythons, so it's
now `PythonEnvironment`.
## Summary
This PR adds a `--python` flag that allows users to provide a specific
Python interpreter into which `uv` should install packages. This would
replace the `VIRTUAL_ENV=` workaround that folks have been using to
install into arbitrary, system environments, while _also_ actually being
correct for installing into non-virtual environments, where the bin and
site-packages paths can differ.
The approach taken here is to use `sysconfig.get_paths()` to get the
correct paths from the interpreter, and then use those for determining
the `bin` and `site-packages` directories, rather than constructing them
based on hard-coded expectations for each platform.
Closes https://github.com/astral-sh/uv/issues/1396.
Closes https://github.com/astral-sh/uv/issues/1779.
Closes https://github.com/astral-sh/uv/issues/1988.
## Test Plan
- Verified that, on my Windows machine, I was able to install `requests`
into a global environment with: `cargo run pip install requests --python
'C:\\Users\\crmarsh\\AppData\\Local\\Programs\\Python\\Python3.12\\python.exe`,
then `python` and `import requests`.
- Verified that, on macOS, I was able to install `requests` into a
global environment installed via Homebrew with: `cargo run pip install
requests --python $(which python3.8)`.
## Summary
This revives a PR from long ago
(https://github.com/astral-sh/uv/pull/383 and
https://github.com/zanieb/pubgrub/pull/24) that modifies how we deal
with dependencies that are declared multiple times within a single
package.
To quote from the originating PR:
> Uses an experimental pubgrub branch (#370) that allows us to handle
multiple version ranges for a single dependency to the solver which
results in better error messages because the derivation tree contains
all of the relevant versions. Previously, the version ranges were merged
(by us) in the resolver before handing them to pubgrub since only one
range could be provided per package. Since we don't merge the versions
anymore, we no longer give the solver an empty range for conflicting
requirements; instead the solver comes to that conclusion from the
provided versions. You can see the improved error message for direct
dependencies in [this
snapshot](https://github.com/astral-sh/puffin/pull/383/files#diff-a0437f2c20cde5e2f15199a3bf81a102b92580063268417847ec9c793a115bd0).
The main issue with that PR was around its handling of URL dependencies,
so this PR _also_ refactors how we handle those. Previously, we stored
URL dependencies on `PubGrubPackage`, but they were omitted from the
hash and equality implementations of `PubGrubPackage`. This led to some
really careful codepaths wherein we had to ensure that we always visited
URLs before non-URL packages, so that the URL-inclusive versions were
included in any hashmaps, etc. I considered preserving this approach,
but it would require us to rely on lots of internal details of PubGrub
(since we'd now be relying on PubGrub to merge those packages in the
"right" order).
So, instead, we now _always_ set the URL on a given package, whenever
that package was _given_ a URL upfront. I think this is easier to reason
about: if the user provided a URL for `flask`, then we should just
always add the URL for `flask`. If we see some other URL for `flask`, we
error, like before. If we see some unknown URL for `flask`, we error,
like before.
Closes https://github.com/astral-sh/uv/issues/1522.
Closes https://github.com/astral-sh/uv/issues/1821.
Closes https://github.com/astral-sh/uv/issues/1615.
First, replace all usages in files in-place. I used my editor for this.
If someone wants to add a one-liner that'd be fun.
Then, update directory and file names:
```
# Run twice for nested directories
find . -type d -print0 | xargs -0 rename s/puffin/uv/g
find . -type d -print0 | xargs -0 rename s/puffin/uv/g
# Update files
find . -type f -print0 | xargs -0 rename s/puffin/uv/g
```
Then add all the files again
```
# Add all the files again
git add crates
git add python/uv
# This one needs a force-add
git add -f crates/uv-trampoline
```
2024-02-15 11:19:46 -06:00
Renamed from crates/puffin-resolver/tests/resolver.rs (Browse further)
