## Summary
This _used_ to be true but we now require fetching metadata for all
distributions even with `--no-deps` since, e.g., we validate that any
declared extras exist.
## Summary
Initially, we showed _all_ resolver and installer output in `uv run` and
`uv tool run`, since it was way too much for workhorse commands. Then,
we moved to showing _no_ output by default, which was way too little --
you had no idea why anything was happening, and commands appeared to
hang.
This PR adds a more nuanced middle-ground. With `--verbose`, we continue
to show everything. But by default, in `uv run` and `uv tool run`...
- During resolution, we show any "Building" and "Build" messages, if you
need to build a source distribution. But we don't show any other output.
(This _could_ be too little for expensive resolutions; we may want to
show a spinner.)
- If there are no changes to be made after resolving, we don't show any
other output.
- If we have to install, we show the progress bars for downloads (which
disappear on completion) followed by a single summary line stating the
number of packages installed.
This feels pretty good, in my limited testing. When everything is built
/ cached, you don't get _any_ additional output. When there's work to
do, you have a sense for what's happening, and we leave you with a
single summary line ("Installed X packages") at the end.
Closes https://github.com/astral-sh/uv/issues/5758.
## Test Plan
Notice that the first `tool run` ends with an install line; the second
shows no additional output:
If you run `uv run` in a package for the first time, we _do_ tell you
that we're building / built it:
But on the second run, there's no output:
If you add a `--with`, we'll show you all the installer progress bars
(which disappear once they're done), and then a single summary line:
Currently, the entry for a package+version+source table is called
`distribution`. That is incorrect, the `sdist` and `wheel` fields inside
of that table are distributions, the table itself is for a package. We
also align ourselves closer with PEP 751.
I went through `lock.rs` and renamed all occurrences of "distribution"
that actually referred to a "package".
This change invalidates all existing lockfiles.
Bikeshedding: Do we call it `package` or `packages`? See also
https://github.com/python/peps/pull/3877
`package` is nice because it looks like a header:
```toml
[[package]]
name = "anyio"
version = "4.3.0"
source = { registry = "https://pypi.org/simple" }
dependencies = [
{ name = "idna" },
{ name = "sniffio" },
]
sdist = { url = "3970183622/anyio-4.3.0.tar.gz", hash = "sha256:f75253795a87df48568485fd18cdd2a3fa5c4f7c5be8e5e36637733fce06fed6", size = 159642 }
wheels = [
{ url = "2f20c40b45/anyio-4.3.0-py3-none-any.whl", hash = "sha256:048e05d0f6caeed70d731f3db756d35dcc1f35747c8c403364a8332c630441b8", size = 85584 },
]
```
`packages` is nice because the field is not a single entry, but a list.
2/3 for https://github.com/astral-sh/uv/issues/4893
---------
Co-authored-by: Charlie Marsh <charlie.r.marsh@gmail.com>
## Summary
Whenever we call `resolve`, we immediately call `fetch` after. And in
some cases `resolve` actually calls `fetch` internally. It seems a lot
simpler to just merge these into one method that returns a `Fetch`
(which itself contains the fully-resolved URL).
Closes https://github.com/astral-sh/uv/issues/5876.
There are three options that determine resolver behavior:
* resolution mode
* prerelease mode
* exclude newer
They are different from the other top level options: If they mismatch,
we recreate the resolution. To distinguish them from the rest of the
lockfile, we group them under an `[options]` header.
1/3 for #4893
Following #5869, the documentation has some less-than-helpful
suggestions to use `uv help python` for details — we should link to the
`uv python` section instead.
## Summary
We were dropping the query and fragment in the wrong place, so the URLs
didn't match up after resolving from an existing lockfile.
Closes https://github.com/astral-sh/uv/issues/5851.
## Summary
Very subtle bug. The scenario is as follows:
- We resolve: `elmer-circuitbuilder = { git =
"https://github.com/ElmerCSC/elmer_circuitbuilder.git" }`
- The user then changes the request to: `elmer-circuitbuilder = { git =
"https://github.com/ElmerCSC/elmer_circuitbuilder.git", rev =
"44d2f4b19d6837ea990c16f494bdf7543d57483d" }`
- When we go to re-lock, we note two facts:
1. The "default branch" resolves to
`44d2f4b19d6837ea990c16f494bdf7543d57483d`.
2. The metadata for `44d2f4b19d6837ea990c16f494bdf7543d57483d` is
(whatever we grab from the lockfile).
- In the resolver, we then ask for the metadata for
`44d2f4b19d6837ea990c16f494bdf7543d57483d`. It's already in the cache,
so we return it; thus, we never add the
`44d2f4b19d6837ea990c16f494bdf7543d57483d` ->
`44d2f4b19d6837ea990c16f494bdf7543d57483d` mapping to the Git resolver,
because we never have to resolve it.
This would apply for any case in which a requested tag or branch was
replaced by its precise SHA. Replacing with a different commit is fine.
It only applied to `tool.uv.sources`, and not PEP 508 URLs, because the
underlying issue is that we aren't consistent about "automatically"
extracting the precise commit from a Git reference.
Closes https://github.com/astral-sh/uv/issues/5860.
## Summary
This is an experimental PR to replace more unsafe calls with more rust
while still trying to keep the binary size small enough. These changes
roughly increase the size of the trampolines to about 40kb~. This is a
alternate PR to https://github.com/astral-sh/uv/pull/5751.
The primary changes here include
* Switch to use rust path components for ease of path management
* Leverage `std::process::exit` for process exit and cleanup
* Use `std::io::Error::last_os_error` for IO Errors to remove
`FormatMessage` complexity
* Use `std::env::current_exe` to get the current executable instead of
`GetModuleFileNameA`
## Test Plan
Added one more existing test case to trampoline tests.
Still need to verify dunce::canonicalize is desired or not on
find_python_exe.
---------
Co-authored-by: konstin <konstin@mailbox.org>
## Summary
We need to avoid using incompatible versions for build dependencies that
are also part of the resolved
environment. This is a very subtle issue, but: when locking, we don't
enforce platform
compatibility. So, if we reuse the resolver state to install, and the
install itself has to
preform a resolution (e.g., for the build dependencies of a source
distribution), that
resolution may choose incompatible versions.
The key property here is that there's a shared package between the build
dependencies and the
project dependencies.
Closes https://github.com/astral-sh/uv/issues/5836.
This already rejects `pyproject.toml`... but because the schema
validation is relaxed (we allow unknown fields, and all fields are
optional), a `pyproject.toml` doesn't get properly rejected here.
This PR makes the schema stricter, but in a safe way (by adding the
other `tool.uv` fields, like `workspace`, as any).
Closes#5832.
## Summary
We allow the use of (e.g.) `.whl.metadata` files when `--no-binary` is
enabled, so it makes sense that we'd also also allow wheels to be
downloaded for metadata extraction. So now, we validate `--no-binary` at
install time, rather than metadata-fetch time.
Closes https://github.com/astral-sh/uv/issues/5699.
## Summary
This fixes a bug introduced by
https://github.com/astral-sh/uv/pull/5232. It turns out that the
`universal_disjoint_base_or_local_requirement` test does not actually do
what it was meant to because of the incorrect python requirement. With a
valid python requirement, it fails on `main`. The problem is that we try
to exclude the original base version from the range of allowed versions
to try and prefer local versions. However, in the test, there is a
branch that depends on the non-local version, with no applicable local
in its fork. We should remove this exclusion as prioritization is
handled by the candidate resolver.
I don't think this will save any time in serialization, but it should
save us some deserialization, since we only need to parse URLs for the
packages we use...
## Summary
Okay, I tested this against...
- Our public "private" proxy
- Fury
- AWS CodeArtifact
- Azure Artifacts
It took a long time.
All of them work as expected with this approach: we omit the credentials
from the lockfile, then wire them back up when the index URL is provided
during subsequent operations.
Closes https://github.com/astral-sh/uv/issues/5119.
