## Summary
Use a single error type in `puffin_distribution`, rather than two
confusingly similar types between `DistributionDatabase` and the source
distribution module.
Also removes the `#[from]` for IO errors and replaces with explicit
wrapping, which is verbose but removes a bunch of incorrect error
messages.
This PR changes the error type to be boxed internally so that it uses
less size on the stack. This makes functions returning `Result<T,
Error>`, in particular, return something much smaller.
The specific thing that motivated this was Clippy lints firing when I
tried to refactor code in this crate.
I chose to achieve boxing by splitting the enum out into a separate
type, and then wiring up the necessary `From` impl to make error
conversions easy, and then making `Error` itself opaque. We could expose
the `Box`, but there isn't a ton of benefit in doing so because one
cannot pattern match through a `Box`.
This required using more explicit error conversions in several places.
And as a result, I was able to remove all `#[from]` attributes on
non-transparent error variants.
Our existing detection doesn't work on Windows, because we canoncalize
the interpreter path but not `info.sys_executable`, so the former
includes the UNC prefix, etc. This is cross-platform and gets at the
intent of the check.
## Summary
This PR adds a `NormalizedDisplay` trait that we can use for user-facing
paths, to strip the UNC prefix on Windows.
On other platforms, the implementation is a no-op (vs. `Display`).
I audited all usages of `.display()`, and changed any that were
user-facing, either via `println!` or `eprintln!`, or by way of being
included in error messages. I did _not_ change uses that were only in
tests or only went to tracing.
Closes https://github.com/astral-sh/puffin/issues/1084.
Windows uses `;` instead of `:` to separate `PATH` entries. This pull
request switches from manually using `:` to the `std::env` functions.
This fixes
```
puffin pip install -e scripts/editable-installs/maturin_editable
```
on windows.
## Summary
When we unzip wheels in the cache, we write the directories out to an
`archive-v0` bucket, and then symlink into that bucket from the
`wheels-v0` and `built-wheels-v0` buckets.
On Windows, symlinks are not well supported. Specifically, they need to
be explicitly enabled by the user. So, instead of symlinks, we now use
junctions, which are well-supported on Windows, and allow you to
(effectively) symlink a directory to another directory. This PR
implements said junction support, which gets the core installer working
on Windows.
In the past, we also used symlinks to implement another primitive: we
wanted to be able to replace a directory "atomically" (I put
"atomically" in quotes because I don't know if it's actually a
guaranteed atomic operation), in case someone was trying to use the
directory while we were replacing it (as opposed to deleting the
directory, then moving it into place).
On Windows, it doesn't appear to be possible to atomically replace a
junction. So instead, I'm using a new design, whereby the cache always
returns canonicalized paths. We know these canonicalized paths are
unique and won't be replaced, so they're safe for writers to rely on. In
general, when we write new data to the cache, we now return the
canonicalized path. When we read from the cache, and try to identify
(e.g.) the set of wheels available to us, we canonicalize the links
immediately and consider them non-existent if that operation fails.
Closes#1085.
---------
Co-authored-by: konstin <konstin@mailbox.org>
Requires https://github.com/zanieb/pubgrub/pull/20
In short, `UnusableDependencies` can be generalized into `Unavailable`
which encompasses incompatibilities where a package range which is
unusable for some inherent reason as well as when its dependencies are
unusable. We can eventually use this to track more incompatibilities in
the solver. I made the reason string required because I can't see a case
where we should leave it out.
Additionally, this improves the display of conflicts in the root
requirements.
## Summary
It turns out this is significantly faster when reading (e.g.) _just_ the
`METADATA` file from a zipped wheel.
I audited other `File::open` usages, and everything else seems to be
using a buffered reader already (directly, or in whatever third-party
crate it's passed to) _or_ is read immediately in full.
See the criterion benchmark:
```
file_reader/numpy-1.26.3-pp39-pypy39_pp73-manylinux_2_17_x86_64.manylinux2014_x86_64.whl
time: [6.9618 ms 6.9664 ms 6.9713 ms]
Found 4 outliers among 100 measurements (4.00%)
4 (4.00%) high mild
file_reader/flask-3.0.1-py3-none-any.whl
time: [237.50 µs 238.25 µs 239.13 µs]
Found 7 outliers among 100 measurements (7.00%)
3 (3.00%) high mild
4 (4.00%) high severe
buffered_reader/numpy-1.26.3-pp39-pypy39_pp73-manylinux_2_17_x86_64.manylinux2014_x86_64.whl
time: [648.92 µs 653.85 µs 660.09 µs]
Found 4 outliers among 100 measurements (4.00%)
3 (3.00%) high mild
1 (1.00%) high severe
buffered_reader/flask-3.0.1-py3-none-any.whl
time: [39.578 µs 39.712 µs 39.869 µs]
Found 8 outliers among 100 measurements (8.00%)
3 (3.00%) high mild
5 (5.00%) high severe
```
Follow-up to https://github.com/astral-sh/puffin/pull/1040 adding a
user-facing warning when we cannot build with their requested version.
e.g.
```
❯ cargo run -- pip compile requirements.in --python-version 3.11.4 --no-build
Resolved 8 packages in 483ms
❯ cargo run -- pip compile requirements.in --python-version 3.11.4
warning: The requested Python version 3.11.4 is not available; 3.11.7 will be used to build dependencies instead.
Resolved 8 packages in 71ms
❯ cargo run -- pip compile requirements.in --python-version 3.11
Resolved 8 packages in 71ms
```
## Summary
This PR uses `ctime` consistently on Unix as a more conservative
approach to change detection. It also ensures that our timestamp
abstraction is entirely internal, so we can change the representation
and logic easily across the codebase in the future.
## Summary
First batch of changes for windows support. Notable changes:
* Fixes all compile errors and added windows specific paths.
* Working venv creation on windows, both from a base interpreter and
from a venv. This requires querying `stdlib` from the sysconfig paths to
find the launcher.
* Basic url/path conversion handling for windows.
* `if cfg!(...)` instead of `#[cfg()]`. This should make it easier to
keep everything compiling across platforms.
## Outlook
Test summary: 402 tests run: 299 passed (15 slow), 103 failed, 1 skipped
There are various reason for the remaining test failure:
* Windows-specific colorama and tzdata dependencies that change the
snapshot slightly. This is by far the biggest batch.
* Some url-path handling issues. I fixed some in the PR, some remain.
* Lack of the latest python patch versions for older pythons on my
machine, since there are no builds for windows and we need to register
them in the registry for them to be picked up for `py --list-paths` (CC
@zanieb RE #1070).
* Lack of entrypoint launchers.
* ... likely more
Extends #1029
Closes https://github.com/astral-sh/puffin/issues/1038
Instead of always using the current Python version for builds when a
target version is provided, we will do our best to use a compatible
Python version for builds.
Removes behavior where Python versions without patch versions were
always assumed to be the latest known patch version (previously
discussed in https://github.com/astral-sh/puffin/pull/534). While this
was convenient for resolutions which include packages which require
minimum patch versions e.g. `requires-python=">=3.7.4"`, it conflicts
with the idea that the target Python version you provide is the
_minimum_ compatible version. Additionally, it complicates interpreter
lookup as we cannot tell if the user has asked for that specific patch
version or not.
In windows, `python3.9` and `python3.11` are not in `PATH`. Instead, we
should pass only the python version to `puffin venv -p` in packse
scenarios (#1039).
This PR replaces a few uses of hash maps/sets with btree maps/sets and
index maps/sets. This has the benefit of guaranteeing a deterministic
order of iteration.
I made these changes as part of looking into a flaky test.
Unfortunately, I'm not optimistic that anything here will actually fix
the flaky test, since I don't believe anything was actually dependent
on the order of iteration.
## Summary
This PR is an alternative approach to #949 which should be much safer.
As in #949, we add a `Refresh` policy to the cache. However, instead of
deleting entries from the cache the first time we read them, we now
check if the entry is sufficiently new (created after the start of the
command) if the refresh policy applies. If the entry is stale, then we
avoid reading it and continue onward, relying on the cache to
appropriately overwrite based on "new" data. (This relies on the
preceding PRs, which ensure the cache is append-only, and ensure that we
can atomically overwrite.)
Unfortunately, there are just a lot of paths through the cache, and
didn't data is handled with different policies, so I really had to go
through and consider the "right" behavior for each case. For example,
the HTTP requests can use `max-age=0, must-revalidate`. But for the
routes that are based on filesystem modification, we need to do
something slightly different.
Closes#945.
## Summary
This PR ensures that we store HTTP caching information for wheels.
Previously, we only stored these for source distributions. This will be
helpful for refresh, since we can avoid re-downloading wheels that are
unchanged per HTTP caching semantics.
There should be zero performance hit here for warm installs, and only an
extremely small hit for cold installs (writing the HTTP cache data to
disk). The hyperfine benchmarks reflect this.
## Summary
If you send a revalidation request to a resource that returns an
`immutable` directive, the server apparently returns a 200 instead of a
304? In other words, the server can ignore the revalidation request.
This PR adds handling on top of the HTTP cache semantics to respect
immutable resources, which is especially useful since all PyPI files are
immutable.
## Summary
One problem we have in the cache today is that we can't overwrite
entries atomically, because we store unzipped _directories_ in the cache
(which makes installation _much_ faster than storing zipped
directories). So, if you ignore the existing contents of the cache when
writing, you might run into an error, because you might attempt to write
a directory where a directory already exists.
This is especially annoying for cache refresh, because in order to
refresh the cache, we have to purge it (i.e., delete a bunch of stuff),
which is also highly unsafe if Puffin is running across multiple threads
or multiple processes.
The solution I'm proposing here is that whenever we persist a
_directory_ to the cache, we persist it to a special "archive" bucket.
Then, within the other buckets, directory entries are actually symlinks
into that "archive" bucket. With symlinks, we can atomically replace,
which means we can easily overwrite cache entries without having to
delete from the cache.
The main downside is that we'll now accumulate dangling entries in the
"archive" bucket, and so we'll need to implement some form of garbage
collection to ensure that we remove entries with no symlinks. Another
downside is that cache reads and writes will be a bit slower, since we
need to deal with creating and resolving these symlinks.
As an example... after this change, the cache entry for this unzipped
wheel is actually a symlink:
Then, within the archive directory, we actually have two unique entries
(since I intentionally ran the command twice to ensure overwrites were
safe):
Per https://apenwarr.ca/log/20181113, `ctime` should be a lot more
conservative, and should detect things like the issue we see with the
python-build-standalone builds, where the `mtime` is identical across
builds.
On Windows, I'm just using `last_write_time`. But we should probably add
`volume_serial_number` and other attributes via
[`winapi_util`](https://docs.rs/winapi-util/latest/winapi_util/index.html).
## Summary
This is a refactor of the source distribution cache that again aims to
make the cache purely additive. Instead of deleting all built wheels
when the cache gets invalidated (e.g., because the source distribution
changed on PyPI or something), we now treat each invalidation as its own
cache directory. The manifest inside of the source distribution
directory now becomes a pointer to the "latest" version of the source
distribution cache.
Here's a visual example:
With this change, we avoid deleting built distributions that might be
relied on elsewhere and maintain our invariant that the cache is purely
additive. The cost is that we now preserve stale wheels, but we should
add a garbage collection mechanism to deal with that.
## Summary
This PR gets rid of the manifest that we store for source distributions.
Historically, that manifest included the source distribution metadata,
plus a list of built wheels.
The problem with the manifest is that it duplicates state, since we now
have to look at both the manifest and the filesystem to understand the
cache state. Instead, I think we should treat the cache as the source of
truth, and get rid of the duplicated state in the manifest.
Now, we store the manifest (which is merely used to check for cache
freshness -- in future PRs, I will repurpose it though, so I left it
around), then the distribution metadata as its own file, then any
distributions in the same directory. When we want to see if there are
any valid distributions, we `readdir` on the directory. This is also
much more consistent with how the install plan works.
Mirroring `virtualenv -p` and driven by the lack of `pythonx.y` in
`PATH` on windows, this PR adds `-p x.y` support to `puffin venv` (first
commit).
Supported formats:
* NEW: `-p 3.10` searches for an installed Python 3.10 (Looking for
`python3.10` on linux/mac).
Specifying a patch version is not supported
* `-p python3.10` or `-p python.exe` looks for a binary in `PATH`
* `-p /home/ferris/.local/bin/python3.10` uses this exact Python
In the second commit, we add python interpreter search on windows using
`py --list-paths`. On windows, all python are called `python.exe` so the
unix trick of looking for `python{}.{}` in `PATH` doesn't work. Instead,
we ask the python launcher for windows to tell us about all installed
packages. We should eventually migrate this to [PEP
514](https://peps.python.org/pep-0514/) by reading the registry entries
ourselves.
Extends #1048 interface providing a more general interface that I think
should be standard.
Allows forcing colors to be on _or_ off. e.g. `NO_COLOR=1 pip install
pip-tools --color always` would be colored.
Hides the `--no-color` option as it only exists for compatibility (and
seems better than throwing an error when people assume it will exist).
Has a nice side-effect of documenting our coloring behaviors e.g.
```
--color <COLOR>
Control colors in output
[default: auto]
Possible values:
- auto: Enables colored output only when the output is going to a terminal or TTY with support
- always: Enables colored output regardless of the detected environment
- never: Disables colored output
```
If the executable is a symbolic link, checking the modified time will
not reflect changes to the source file e.g.
```
❯ touch foo
❯ ln -s foo foobar
❯ gstat -c %Y foo
1705958431
❯ gstat -c %Y foobar
1705958438
❯ touch foo
❯ gstat -c %Y foobar
1705958438
```
This can result in a stale cache being treated as fresh; for example,
when Rye changes the interpreter linked in a virtual environment.
In https://github.com/astral-sh/puffin/pull/986 there was some confusion
about what these values are set to and I noticed that we never actually
display the target version being used for a resolution.
- Consistently display the Python interpreter being used, i.e. make it
clear that we are referring the the interpreter/installed Python version
and always show the version number
- Display the target Python version during solving
## Summary
This PR adds support for PyPy wheels by changing the compatible tags
based on the implementation name and version of the current interpreter.
For now, we only support CPython and PyPy, and explicitly error out when
given other interpreters. (Is this right? Should we just fallback to
CPython tags...? Or skip the ABI-specific tags for unknown
interpreters?)
The logic is based on
4d85340613/src/packaging/tags.py (L247).
Note, however, that `packaging` uses the `EXT_SUFFIX` variable from
`sysconfig`... Instead, I looked at the way that PyPy formats the tags,
and recreated them based on the Python and implementation version. For
example, PyPy wheels look like
`cchardet-2.1.7-pp37-pypy37_pp73-win_amd64.whl` -- so that's `pp37` for
PyPy with Python version 3.7, and then `pypy37_pp73` for PyPy with
Python version 3.7 and PyPy version 7.3.
Closes https://github.com/astral-sh/puffin/issues/1013.
## Test Plan
I tested this manually, but I couldn't find macOS universal PyPy
wheels... So instead I added `cchardet` to a `requirements.in`, ran
`cargo run pip sync requirements.in --index-url
https://pypy.kmtea.eu/simple --verbose`, and added logging to verify
that the platform tags matched (even if the architecture didn't).
This PR attempts to fix a common footgun in `requirements.txt` files.
Previously, to provide a file, you had to use `package_name @
file:///Users/crmarsh/...` -- in other words, an absolute path.
Now, these requirements follow the exact same rules as editables, so you
can do:
```
package_name @ ./file.zip
```
And similar.
The way the parsing is setup, this is intentionally _not_ supported when
reading metadata -- only when parsing `requirements.txt` directly.
Closes#984.
